1.0 Overview
Many Internet service providers and online services require you to manually enter information, such as your user name and password, to establish a connection. With Scripting support for Dial-Up Networking, you can write a script to automate this process.
A script is a text file that contains a series of commands, parameters, and expressions required by your Internet service provider or online service to establish the connection and use the service. You can use any text editor, such as Microsoft Notepad, to create a script file. Once you’ve created your script file, you can then assign it to a specific Dial-Up Networking connection by running the Dial-Up Scripting Tool.
2.0 Basic Structure of a Script
A command is the basic instruction that a script file contains. Some commands require parameters that further define what the command should do. An expression is a combination of operators and arguments that create a result. Expressions can be used as values in any command. Examples of expressions include arithmetic, relational comparisons, and string concatenations.
The basic form of a script for Dial-Up Networking follows:
;
; A comment begins with a semi-colon and extends to
; the end of the line.
;
proc main
; A script can have any number of variables
; and commands
variable declarations
command block
endproc
A script must have a main procedure, specified by the proc keyword, and a matching endproc keyword, indicating the end of the procedure.
The Essay on Apply Hardened Security For Linux Services & Applications
1. When configuring services, what Linux directory typically contains server configuration files? /etc 2. What command disables remote access to the MySQL Database? Is this a security hardening best practice? Bind-address=YOUR-SERVER-IP, If you don’t need remote access, then binding should be considered a best practice. 3. What is a Linux runlevel for a specific service of application? What ...
You must declare variables before you add commands. The first command in the main procedure is executed, and then any subsequent commands are executed in the order they appear in the script. The script ends when the end of the main procedure is reached.
3.0 Variables
Scripts may contain variables. Variable names must begin with a letter or an underscore (‘_’), and may contain any sequence of upper- or lower-case letters, digits, and underscores. You cannot use a reserved word as a variable name. For more information, see the list of reserved words at the end of this document.
You must declare variables before you use them. When you declare a variable, you must also define its type. A variable of a certain type may only contain values of that same type. The following three types of variables are supported:
TypeDescription
integerA negative or positive number, such as 7, -12, or 5698.
stringA series of characters enclosed in double-quotes; for example, “Hello world!” or “Enter password:”.
booleanA logical boolean value of TRUE or FALSE.
Variables are assigned values using the following assignment statement:
variable = expression
The variable gets the evaluated expression.
Examples:
integer count = 5
integer timeout = (4 * 3)
integer i
boolean bDone = FALSE
string szIP = (getip 2)
set ipaddr szIP
3.1 System Variables
System variables are set by scripting commands or are determined by the information your enter when you set up a Dial-Up Networking connection. System variables are read-only, which means they cannot be changed within the script. The system variables are:
NameTypeDescription
$USERIDStringThe user identification for the current connection. This variable is
the value of the user name specified in the Dial-Up Networking
Connect To dialog box.
$PASSWORDStringThe password for the current connection. This variable is the
value of the user name specified in the Dial-Up Networking
The Essay on Fferent Types Of Criticism And Literary Movements In Short Stories
The short story dates back as early as the 14th Century. It offers what a novel or the equivalent would offer but it has a swiftness and completeness about it. According to Ruby Redinger, the short story is most powerful through graphic narration (752). The short story has captured a diverse group of things from the supernatural to an everyday occurrence. Nearly any situation can be worked into a ...
Connect To dialog box.
$SUCCESSBooleanThis variable is set by certain commands to indicate whether or not the command succeeded. A script can make
decisions based upon the value of this variable.
$FAILUREBooleanThis variable is set by certain commands to indicate
whether or not the command failed. A script can make decisions
based upon the value of this variable.
These variables may be used wherever an expression of a similar type is used. For example,
transmit $USERID
is a valid command because $USERID is a variable of type string.
4.0 String Literals
Scripting for Dial-Up Networking supports escape sequences and caret translations, as described below.
String LiteralDescription
^charCaret translation
If char is a value between ‘@’ and ‘_’, the character sequence is translated into a single-byte value between 0 and 31. For example, ^M is converted to a carriage return.
If char is a value between a and z, the character sequence is translated into a single-byte value between 1 and 26.
If char is any other value, the character sequence is not specially treated.
<cr>Carriage return
<lf>Linefeed
“Double-quote
^Single caret
<Single ‘<‘
Backslash
Examples:
transmit “^M”
transmit “Joe^M”
transmit “<cr><lf>”
waitfor “<cr><lf>”
5.0 Expressions
An expression is a combination of operators and arguments that evaluates to a result. Expressions can be used as values in any command.
An expression can combine any variable, or integer, string, or boolean values with any of the unary and binary operators in the following tables. All unary operators take the highest precedence. The precedence of binary operators is indicated by their position in the table.
The unary operators are:
OperatorType of Operation
-Unary minus
!One’s complement
The binary operators are listed in the following table in their order of precedence. Operators with higher precedence are listed first:
The Essay on System Variables Variable Value String
... used. For example, transmit $USERID is a valid command because $USERID is a variable of type string. 4. 0 String Literals Scripting ... Boolean This variable is set by certain commands to indicate whe the or not the command succeeded. A script can make decisions ... of this variable. $FAILURE Boolean This variable is set by certain commands to indicate whether or not the command failed. A script can ...
OperatorsType of OperationType Restrictions
* /MultiplicativeIntegers
+ – Additiveintegers Strings (+ only)
< > <= >=RelationalIntegers
== !=EqualityIntegers, strings, booleans
andLogical ANDBooleans
orLogical ORBooleans
Examples:
count = 3 + 5 * 40
transmit “Hello” + ” there”
delay 24 / (7 – 1)
6.0 Comments
All text on a line following a semicolon is ignored.
Examples:
; this is a comment
transmit “hello”; transmit the string “hello”
7.0 Keywords
Keywords specify the structure of the script. Unlike commands, they do not perform an action. The keywords are listed below.
proc name
Indicates the beginning of a procedure. All scripts must have a main procedure (proc main).
Script execution starts at the main procedure and terminates at the end of the main procedure.
endproc
Indicates the end of a procedure. When the script is executed to the endproc statement for the main procedure, Dial-Up Networking will start PPP or SLIP.
integer name [ = value ]
Declares a variable of type integer. You can use any numerical expression or variable to initialize the variable.
string name [ = value ]
Declares a variable of type string. You can use any string literal or variable to initialize the variable.
boolean name [ = value ]
Declares a variable of type boolean. You can use any boolean expression or variable to initialize the variable.
8.0 Commands
All commands are reserved words, which means you cannot declare variables that have the same names as the commands. The commands are listed below:
delay nSeconds
Pauses for the number of seconds specified by nSeconds before executing the next command in the script.
Examples:
delay 2; pauses for 2 seconds
delay x * 3; pauses for x * 3 seconds
getip value
Waits for an IP address to be received from the remote computer. If your Internet service provider returns several IP addresses in a string, use the value parameter to specify which IP address the script should use.
The Essay on A1 script win213
You work for a medium size wholesale book publisher as the system administrator. This year management has decided, at the last minute, to sell books at its annual book conference. The company as a rule does not sell its books retail, consequently management does not want to purchase an off the shelve retail sales program. Rather, you have been assigned the task of writing a PowerShell text-based ...
Examples:
; get the second IP address
set ipaddr getip 2
; assign the first received IP address to a variable
szAddress = getip
goto label
Jumps to the location in the script specified by label and continues executing the commands following it.
Example:
waitfor “Prompt>” until 10
if !$SUCCESS then
goto BailOut; jumps to BailOut and executes commands
; following it
endif
transmit “bbs^M”
goto End
BailOut:
transmit “^M”
halt
Stops the script. This command does not remove the terminal dialog window. You must click Continue to establish the connection. You cannot restart the script.
if condition then
commands
endif
Executes the series of commands if condition is TRUE.
Example:
if $USERID == “John” then
transmit “Johnny^M”
endif
label :
Specifies the place in the script to jump to. A label must be a unique name and follow the naming conventions of variables.
set port databits 5 | 6 | 7 | 8
Changes the number of bits in the bytes that are transmitted and received during the session. The number of bits can be between 5 and 8. If you do not include this command, Dial-Up Networking will use the properties settings specified for the connection.
Example:
set port databits 7
set port parity none | odd | even | mark | space
Changes the parity scheme for the port during the session. If you do not include this command, Dial-Up Networking will use the properties settings specified for the connection.
Example:
set port parity even
set port stopbits 1 | 2
Changes the number of stop bits for the port during the session. This number can be either 1 or 2. If you do not include this command, Dial-Up Networking uses the properties settings specified for the connection.
Example:
set port stopbits 2
set screen keyboard on | off
Enables or disables keyboard input in the scripting terminal window.
Example:
set screen keyboard on
set ipaddr string
Specifies the IP address of the workstation for the session. String must be in the form of an IP address.
Examples:
szIPAddress = “11.543.23.13”
The Essay on Franz Joseph Haydn String Quartet
The son of a wheelwright, he was trained as a choirboy and taken into the choir at St. Stephen's Cathedral, Vienna, where he sang from circa 1740 to circa 1750. He then worked as a freelance musician, playing the violin and keyboard instruments, accompanying for singing lessons given by the composer Porpora, who helped and encouraged him. At this time he wrote some sacred works, music for theatre ...
set ipaddr szIPAddress
set ipaddr “11.543.23.13”
set ipaddr getip
transmit string [ , raw ]
Sends the characters specified by string to the remote computer.
The remote computer will recognize escape sequences and caret translations, unless you include the raw parameter with the command. The raw parameter is useful when transmitting $USERID and $PASSWORD system variables when the user name or password contains character sequences that, without the raw parameter, would be interpreted as caret or escape sequences.
Examples:
transmit “slip” + “^M”
transmit $USERID, raw
waitfor string [ , matchcase ] [ then label
{ , string [ , matchcase ] then label } ]
[ until time ]
Waits until your computer receives one or more of the specified strings from the remote computer. The string parameter is case-insensitive, unless you include the matchcase parameter.
If a matching string is received and the then label parameter is used, this command will jump to the place in the script file designated by label.
The optional until time parameter defines the maximum number of seconds that your computer will wait to receive the string before it execute the next command. Without this
parameter, your computer will wait forever.
If your computer receives one of the specified strings, the system variable $SUCCESS is set to TRUE. Otherwise, it is set to FALSE if the number of seconds specified by time elapses before the string is received.
Examples:
waitfor “Login:”
waitfor “Password?”, matchcase
waitfor “prompt>” until 10
waitfor
“Login:”then DoLogin,
“Password:”then DoPassword,
“BBS:”then DoBBS,
“Other:”then DoOther
until 10
while condition do
commands
endwhile
Executes the series of commands until condition is FALSE.
Example:
integer count = 0
while count < 4 do
transmit “^M”
waitfor “Login:” until 10
if $SUCCESS then
goto DoLogin
The Essay on Computers general History
In this report, youll about the components and history regarding the computer. A computer is a devise that processes, organize, and calculate, displays information. It can communicate with other computers all over the world. The most powerful computer can perform 10s of billion of calculations per second. People use computers for business, track inventories, and use bar codes, personal home use ...
endif
count = count + 1
endwhile
…
9.0 Reserved Words
The following words are reserved and may not be used as variable names.
andbooleandatabitsdelay
doendifendprocendwhile
evenFALSEgetipgoto
haltifintegeripaddr
keyboardmarkmatchcasenone
oddoffonor
parityportprocraw
screensetspacestopbits
stringthentransmitTRUE
untilwaitforwhile