To quote Karl Marx, blue boxing has always been the most noble form of phreaking. As opposed to such things as using an MCI code to make a free fone call, which is merely mindless pseudo-phreaking, blue boxing is actual interaction with the Bell System toll network. It is likewise advisable to be more cautious when blue boxing, but the careful phreak will not be caught, regardless of what type of switching system he is under. In this part, I will explain how and why blue boxing works, as well as where. In later parts, I will give more practical information for blue boxing and routing information. To begin with, blue boxing is simply communicating with trunks. Trunks must not be confused with subscriber lines (or “customer loops”) which are standard telefone lines. Trunks are those lines that connect central offices. Now, when trunks are not in use (i.e., idle or “on-hook” state) they have 2600Hz applied to them. If they are two-way trunks, there is 2600Hz in both directions. When a trunk IS in use (busy or “off-hook” state), the 2600Hz is removed from the side that is off-hook. The 2600Hz is therefore known as a supervisory signal, because it indicates the status of a trunk; on hook (tone) or off-hook (no tone).
Note also that 2600Hz denoted SF (single frequency) signalling and is “in-band.” This is very important. “In-band” means that is within the band of frequencies that may be transmitted over normal telefone lines. Other SF signals, such as 3700Hz are used also. However, they cannot be carried over the telefone network normally (they are “out-of-band” and are therefore not able to be taken advantage of as 2600Hz is. Back to trunks. Let’s take a hypothetical phone call. You pick up your fone and dial 1+806-258-1234 (your good friend in Amarillo, Texas).
The Essay on New Orleans Jazz Band Dag
New Orleans Jazz Band: Dag " They have a word down South to describe the way you feel when your packed into a crowded dive at 1: 00 AM, where the cigarette smoke is so thick it makes it sown weather; and the waitress is slinging bourbon and Frito's while some bad-ass Jazz Funk band rocks the house as hard as Blue Ridge granite, and the sweat flows down from the stage like the cloudy waters of ...
For ease, we’ll assume that you are on #5 Crossbar switching and not in the 806 area. Your central office (CO) would recognize that 806 is a foreign NPA, so it would route the call to the toll centre that serves you. [For the sake of accuracy here, and for the more experienced readers, note that the CO in question is a class 5 with LAMA that uses out-of-band SF supervisory signalling]. Depending on where you are in the country, the call would leave your toll centre (on more trunks) to another toll centre, or office of higher “rank”. Then it would be routed to central office 806-258 eventually and the call would be completed. IllustrationA—CO1——-TC1——TC2—-CO2—-BA…. youCO1=your central officeTC1.. your toll office.TC2.. toll office in Amarillo.CO2.. 806-258 central office.B…. your friend (806-258-1234)In this situation it would be realistic to say that CO2 uses SFin-band (2600Hz) signalling, while all the others use out-of-band signalling (3700Hz).
If you don’t understand this, don’t worry. I am pointing this out merely for the sake of accuracy. The point is that while you are connected to 806-258-1234, all those trunks from YOUR central office (CO1) to the 806-258 central office (CO2) do *NOT* have 2600Hz on them, indicating to the Bell equipment that a call is in progress and the trunks are in use. Now let’s say you’re tired of talking to your friend in Amarillo, so you send a 2600Hz down the line. This tone travels down the line to your friend’s central office (CO2) where it is detected. However, that CO thinks that the 2600Hz is originating from Bell equipment, indicating to it that you’ve hung up, and thus the trunks are once again idle (with 2600Hz present on them).
The Essay on Use Office Equipment
1.1 The different types of office equipment I use on a regular basis are the office computer which I use to create documents, send emails etc. the office telephone which I use to receive and send phone calls to clients, managers and such. I a scanner to send documents to clients such as packing lists, delivery advice notes and I also use the printer to print out orders and there attachments such ...
But actually, you have not hung up, you have fooled the equipment atyour friend’s CO into thinking you have. Thus,it disconnects him and resets the equipment to prepare for the next call. All this happens very quickly (300-800ms for step-by-step equipment and 150-400ms for other equipment).
When you stop sending 2600Hz (after about a second), the equipment thinks that another call is coming towards –> on hook, no tone –>off hook.
Now that you’ve stopped sending 2600Hz, several things happen:1) A trunk is seized.2) A “wink” is sent to the CALLING end from the CALLED end indicating that the CALLED end (trunk) is not ready to receive digits yet.3) A register is found and attached to the CALLED end of the trunk within about two seconds (max).4) A start-dial signal is sent to the CALLING end from the CALLED end indicating that the CALLED end is ready to receive digits.
Now, all of this is pretty much transparent to the blue boxer. All hereally hears when these four things happen is a
The Term Paper on Intelligent Call Routing Central Controller
Intelligent Call Routing Mr. Harrison decides to call his credit card company to inquire about a credit limit increase. He picks up the phone and dials the company's 800 number. He is then prompted by a friendly voice that says, "Welcome to Mycorp, please enter your 15 digit account number." After punching his 15-digit account number into the handset, he is quickly prompted by a friendly agent who ...
[Exactly like dialingnormal fone call]. Following either the KP and 7 or 10 digits, a STart issent to signify that no more digits follow. Example of a complete call:1> Dial 1-806-258-12342> wait for a call-progress indication (such as ring,busy,recording,etc.)3> Send 2600Hz for about 1 second.4> Wait for about ll-progress indication (such as ring,busy,recording,etc.)5> Send KP+305+994+9966+STThe call will then connect if everything was done properly. Note that if acall to an 806 number were being placed in the same situation, the are codewould be omitted and only KP + seven digits + ST would be sent.Code 11 and code 12 are used in international calling to requestcertain types of operators. KP2 is used in international calling to route acall other than by way of the normal route, whether for economic orequipment reasons. STp, ST2p, and ST3p (prime, two prime, and three prime)are used in TSPS signalling to indicate calling type of call (such ascoin-direct dialing.It all started here………………. Exodus
The Term Paper on Gordon Brown Is Not An Able British Prime Minister
The British history has been famous for its efficient governance, and developmental policies of the government. Both the Conservative and the Labour Parties have contributed to the economic prosperity of the country through enlightening vision, strategic planning, and effective implementation of its policies. During the past centuries, Great Britain has provided one of the best healthcare systems ...
