Nucor Corporation – Structuring for Efficiency and Effectiveness Introduction Nucor achieved its position as one of the largest steel producers in the United States by carefully monitoring costs and paying attention to the needs of its markets. This strategy of providing its customers with a competitive product at competitive prices has brought success and growth to Nucor, in sales, income, and stock price. Recently, however, the control of the organization has been brought into question. The recent announcement of a joint venture between Nucor and U.
S. Steel to develop, test, and bring on line a new method for turning iron ore into steel added to the concern over the ability of company management to maintain the entrepreneurial spirit for which the company is famous. Background Nucor is the second largest steel producer (2 nd in assets, 1 st in profits) in the United States. Its profits of $123 million have made it one of the most efficient firms in the steel industry. Nucor achieved that position by focusing on the manufacturing segment known as mini-mills – the relatively small, electrically-powered mills that melt down scrap steel to manufacture products.
The Business plan on Nucor Steel Case Study
Percentage use of Production Capacity Nucor steel has the largest production capacity capability in North America. However, they have some deficiencies in this area in that in 2010 they utilized just 70 percent of capacity, though it increased in 2011 it was still just 74 percent. Gaining greater production efficiency will reduce costs and in turn increase the profitability of the company. Issue # ...
This process saves on costly labor, raw materials, and the capital-intensive machinery necessary to produce steel from iron ore. A major concern of mini-mill steel manufacturers is maintaining quality, since their raw material consists of scrap steel of varying quality, containing a variety of alloys and impurities. Another concern it the recent rising price of scrap steel. Nucor started out by manufacturing steel for the beams and posts produced in company-owned structural steel manufacturing plants and then expanded by selling its low-cost steel to other firms. Outside customers gradually became the primary outlet for sales by the mini-mills. Nucor was able to expand sales from the mini-mills by keeping costs below its competitors, both in the United States and abroad.
Nucor has consistently sought ways to lower costs while broadening markets. During the latter part of the 1980 s, much of the company’s efforts were placed on developing technology for manufacturing sheet – flat-rolled steel of the type used by automotive and appliance manufacturers – which had traditionally been the sole domain of the big steel companies and foreign competitors. Ken Iverson, former CEO of Nucor, risked several hundred million dollars in adapting an untested German process for manufacturing this flat steel. Fortunately, the gamble paid off, increasing the company’s growth in both sales and profits.
Iverson determined that one means of maintaining both quality control and costs was a highly decentralized organizational structure. Corporate staff was kept to a minimum. All decisions dealing with operations were delegated to the individual plants. Iverson believed that the managers closest to the action should be given the responsibility to develop plans to allow the plants, and the firm, to adapt to any changes in the environment. Iverson also gave plant-level mangers the authority to make and implement the decisions necessary to make these adaptations. Each plant manager gave a brief monthly report to headquarters and received a report comparing the divisions’ performance.
The Term Paper on Abc Steel Company
Robert Cruz, newly appointed Shop Manager of ABC Steel Company, was making his way through the plant back to his office. He had just reviewed the company’s most recent operating statistics with his boss, Rudyard de los Santos, Operations Manager. The statistics were shocking: ABC Company’s production backlog had reached such proportions that top management decided not to accept any further ...
Major expenditures and changes were made by consensus at the periodic meetings of all plant and corporate managers. Iverson took pride in the lean corporate structure. But the lack of corporate staff appeared to become a problem as Nucor expanded. By 1994 the company was operating 16 plants, and the flat-rolled steel plants increased the diversity of the operations reporting to the president. Nucor president, John Correnti, noted ‘My biggest fear is even though we ” re now a $3. 3 billion company, we ” ve still got to act, feel, and smell like a $300 million company (1).’ Some steel industry analysis remained concerned over how Iverson would continue to control the growth of a company that was attempting to diversity its product line.
Iverson is not overly concerned with how Nucor will cope. He delights in highlighting Nucor’s seeming incongruities: Nucor’s 7, 000 employees are the best-paid workers in our industry, yet Nucor has the lowest labor cost per ton of steel produced. Nucor is a Fortune 500 company with sales in excess of $3. 6 billion, yet we have a total of just 22 people working at our corporate headquarters, and just four layers of management from the CEO to the front-line worker. Nucor operates in a ‘rust belt’ industry that lost one out of two jobs over a 25-year span, yet Nucor has never laid off an employee or shut down a facility for lack of work, nor have we lost money in any business quarter for more than 30 consecutive years. We are in a labor-intensive and technology-intensive business, yet we ” ve built most of our manufacturing facilities in areas that have more cows than people.
We track and manage costs more closely than just about any business you can name, yet we anticipate and accept that roughly half of our investments in new ideas and new technologies will yield no usable results. Nucor pays hourly wages and salaries that run about 66 percent to 75 percent of the average for our industry -the rest of our employees’ income comes from ‘at risk’ bonuses -yet we regularly have large pools of qualified applicants for every job opening. Our company is broken up into 21 independently operated businesses, each with almost complete local autonomy, yet we have an unusually active and free exchange of ideas and solutions across divisional, geographical, and functional boundaries. We have no R&D department or corporate engineering group, yet we were America’s first major operator of ‘mini mills,’ the first to demonstrate that mini mills could make flat-rolled steel (a high-end steel product formerly made only by the Big Steel companies), the first to apply thin-slab casting (a technology Big Steel had written off as impractical), and the first to commercially produce iron carbide (an energy-efficient substitute for the scrap metal from which mini mills make steel).
The Essay on Operations Management Company Bofa Employees
Operations management focuses on managing the processes of producing and distributing products and services. Operations activities often include product creation, development, production and distribution. It deals with all operations within the organization. Related activities include managing purchases, inventory control, quality control, storage, logistics and evaluations. The nature of how ...
New Steel, November, 1997 Nucor replaces many control features common to most companies with an incentive program that focus ses on productivity.
As Ted Koster of New Steel notes: ‘What Nucor management has been able to do is get workers to identify their own interests fundamentally with those of management, something managers have been attempting to do, not very successfully, since the dawn of industry (2) ‘. Iverson stresses four clear-cut principles: Management is obligated to mange the company in such a way that employees will have the opportunity to earn according to their productivity. Employees should feel confident that if they do their jobs properly, they will have a job tomorrow. Employees have the right to be treated fairly and must believe that they will be.
Employees must have an avenue of appeal when they believe they are being treated unfairly (2).
The question becomes: Can this management arrangement continue as the company grows? Questions facing Nucor management revolved around issues of staffing, control, communications, and planning. As the span of control of top management increased, concern over whether operations were becoming unwieldy and uncomfortable became evident. Iverson was proud of the fact that there were only three layers between the President and workers on the floor. Managers were being rewarded for meeting short-term goals of increased sales, decreased costs, and quality maintenance.
For example, Nucor managers would set standards for quality and output for groups of 25 to 30 employees and reward them with weekly bonuses. Nucor top management maintained that this highly decentralized and lean organizational structure was necessary to meet foreign competition. According to top management, this structure would allow the firm to take advantage of those growth opportunities available in the environment. The risk was that the lower levels of management would follow short-term goals at the expense of long-term corporate objectives and coordination.
The Business plan on Introducing Performance Management System Yen Employees
Introduction This report is an attempt to analyse the existing Performance Management System for Large Financial Service Organisation (LFSO) and from this information, recommend, and implement an appropriate new performance management system. LFSO is an organisation, which traditionally has a paternalistic culture with low levels of unionization. LFSO current Performance Management system was ...
The Future There was also concern that the joint venture with U. S. Steel would hinder the quick decision making typical at Nucor. Iverson had gambled by committing to the first phase of the new process on his own, without first testing the process in a pilot plant on a small scale. The next stage was to complete the new process with a plant in the United States, relying on the high level of research and development skills at U. S.
Steel and the ability of Nucor to pioneer new methods. Analysts wondered whether Nucor could coexist with U. S. Steel, with its large, hierarchical structure and strong union. This challenge was especially important since the new venture was felt to be the focal point for the continued growth of Nucor. In the late 1990 s, Iverson was fired by the Board of Directors of Nucor.
His successor, John Correnti, who along with Iverson were the two major proponents of the mini-mill concept, was ushered out soon afterwards. Daniel R. DiMicco is the new President and CEO, but with years of experience at Nucor, the vision may or may not change. Will the new management attempt to rein in the general managers of the various operating entities of Nucor – a situation neither Iverson nor Correnti supported?
