INTRODUCTION For millennia mankind has inhabited the third planet from the sun; the planet that supports life and is know to us as Earth. Although there has been life on Earth for quite sometime, it is only in the past few centuries that man has come to learn about what makes up the interior of this planet. The English scientist, Isaac Newton, can be seen as a pioneer in regards to learning about the Earth’s interior, as he calculated from his studies of planets and the force of gravity, that the average density of the Earth is twice that of surface rocks and therefore that the Earth’s interior must be composed of a much denser material^1. Our knowledge of what’s inside the Earth has improved immensely since Newton’s time, but his estimate of the density remains essentially unchanged. So what is this new knowledge of the Earth’s interior? PRESENT KNOWLEDGE’A round sphere with many layers, all varying in thickness, each having it’s own colour and taste… .’ this is a description of a gob-stopper and also bares a close resemblance to the internal structure of the Earth; a sphere divided into three layers, differing in density, composition, strength, and state.
The densest of these layers is the core, which is composed largely of metallic iron, with small amounts of nickel and other elements^2. The less dense mantle then covers this layer, being composed of magnesium and iron silicates. The outermost layer is that of the crust, it has the lowest density of all the layers and can be separated further as its thickness varies greatly from place to place, with the difference being distinguished by land and sea and also its composition. For this reason the core is subdivided into the continental crust (average thickness 45 km with a granitic composition) and the oceanic crust (average thickness 8 km with a basaltic composition) ^1. Similarly the core can also be subdivided, but the difference is not one between compositions but one by physical state.
The Term Paper on The Layers Of The Earth
The Earth’s core takes up sixteen percent of Earth’s volume, containing thirty-three percent of its Mass ..Pressure rises steadily inside the earth because of the weight of overlying rock. Therefore ,the Pressure at the outer boundary of the core reaches 1.37 million atmospheres, 3.7 million Atmospheres. The core is made mostly of iron and nickel and possibly smaller amounts of lighter ...
The inner core of the Earth is solid iron; this is because it is under such high pressure, so high that temperature has no bearing on its state. The outer core has a balance between temperature and pressure so it’s iron composition is in the molten state. Rock strength can also add further categorization to the Earths interior, bringing in the sphere layers: the mesosphere, asthenosphere, and lithosphere. The strength of a solid is controlled by both temperature and pressure; when heated a solid looses strength and when under pressure a solid gains strength. This is what divides the mantle and the crust into these three sphere layers. At the lower part of the mantle (depth 2883 km-350 km) there exists a region of high temperature and high strength, this is known as the mesosphere or middle sphere, then at a depth of 350-100 km there is a sphere with balance of temperature and pressure (leaving rocks with little strength) called the asthenosphere or weak sphere which has a plastic nature, and finally there is the region from 100 km to the Earth’s surface called the lithosphere.
The rocks in the lithosphere are more rigid, cooler and stronger than the plastic asthenosphere. Fig 1 – The sliced view of the Earth identifying the layers and spheres. ^1 Now that the Earth’s interior has been identified and separating into regions the question to be ask is ‘ how was it determined?’ GEOLOGICAL OBSERVATIONS One way that we can find out what is under the surface is to drill. Many countries have attempted to drill wells down into the Earth’s crust but attempts come into trouble around the 7 km depth.
The deepest well belongs to the Soviets (Russian) and it is located on the Northern Kola Peninsula. It is the result of a twenty-year effort to drill to a target depth of 15 km but fell short at 12 km in 1989. It took 5 years to drill 7 km; 9 years to drill the next 5 km and at the bottom of the hole the temperature was 190 oC. From doing this information about the Earth’s interior can be determined at roughly 12 km, now what about deeper? Volcanic activity brings up materials in magma such as Xenolith’s that are pieces of mantle in the lava, example: coarse-grained olivine (peridotite) xenolith’s in basaltic lava.
The Research paper on Why Does the Earth Support Life
Earth is where all of us live in. Earth is the 3rd Planet from the sun, as well as the 5th largest planet in our solar system. As far as humans know Earth is unique in the Solar System as being the only planet which is able to support life in all its forms: from basic micro-organisms to highly sophisticated human beings. There are many reasons why this happens. In this Research paper I will be ...
This is only useful to depth of about 200 km. Well that takes care of most of the mantle (lithosphere and asthenosphere) but what about the core? The best evidence of core composition comes from samples from the solar system, ie. iron meteorites. These meteorites are believed to be the core of small proto planets that were shattered in the early life of the solar system. There composition is thought to be extremely similar to Earth’s and the other terrestrial planets. The last and most widely used method is that of seismology.
(Seism os is a Greek word meaning shock) ^3. Seismology deals with seismic waves, which are vibrations in the body of the Earth. Scientists categorize seismic movements into four types of diagnostic waves that travel at speeds ranging from 3 to 15 km per second. Two of the waves travel around the surface of the Earth in rolling swells and are called surface waves. The other two, Primary (P) or compression waves and Secondary (S) or shear waves, penetrate the interior of the Earth. Primary waves compress and dilate the matter they travel through (either rock or liquid) similar to sound waves.
They also have the ability to move twice as fast as S waves. Secondary waves propagate through rock but are not able to travel through liquid. Both P and S waves refract or reflect at points where layers of differing physical properties meet. They also reduce speed when moving through hotter material. These changes in direction and velocity are the means of locating discontinuities. These Seismic discontinuities aid in distinguishing the divisions of the Earth into inner core, outer core, mantle etc.
Fig 2 – illustration of the difference between P-waves and S-waves. These seismic waves (which are generated naturally by earthquakes, volcanoes and impacts, and may be produced artificially by explosions and mechanical device) tell us about the interior in several general ways. ^3 CONCLUSION Beginning some three centuries ago with Isaac Newton’s calculations, we have formed a detailed model of what the internal structure of the Earth looks like. We have looked at some of the advances in technology, the greatest of these being ‘seismology’ and we are now left to decided where to go next… could it be DOWN.
The Term Paper on Volcanic and Seismic Events as Proof of Plate Tectonic Theory
... Earth is derived in large part from the interpretation of seismic studies that measure the reflection of seismic waves off features in Earth’s interior. ... at right angles to the direction of travel. 3. Love/Surface waves (L waves) which travel slowest and near to the ground surface. ... within the mantle. These currents are powered by the core, which heats the magma, causing it to rise, cool ...
– Zhan n K Jochinke 2001 BIBLIOGRAPHY 1 – USGS Website ‘The Interior of the Earth’ Eugene C Robertson web 2 – The Blur Planet (2 nd edition) ‘An introduction to Earth System Science’ BJ Skinner, SC Porter, DB Boykin 3 – OJT A Website ‘The Interior of the Earth’ web.
