Place the following networking technologies in the order of their highest speed, from slowest to fastest: Fiber optic, dial-up networking, cable modem, Fast Ethernet Dial-up networking, cable modem, fiber-optic, Fast Ethernet 2. What is the difference between ADSL and SDSL? ADSL uses one upload speed from the consumer to an ISP and a faster download speed. SDSL uses equal bandwidths in both directions. 3. Among satellite, cable modem, and DSL, which technology experiences more latency? Satellite 4.
When using DSL to connect to the Internet, the data transmission shares the cabling with what other technology? Regular telephone 5. When using a cable modem to connect to the Internet, the data transmission shares the cabling with what other technology? Television 6. Which version of 802. 11 technologies can use two antennae at both the access point and the network adapter? 802. 11n 7. Which wireless encryption standard is stronger,
What is the name of the port used by an Ethernet cable? What is the name of the port used by a dial-up modem? RJ-45, RJ-11 . If you want to upgrade your 100BaseT Ethernet network so that it will run about 10 times the current speed, what technology would you use? Gigabit Ethernet 10. What is the maximum length of a cable on a 100BaseT network? 100 meters or 328 feet 11. What does the 100 in the name 100BaseT indicate? The transmission speed of the network which is 100 Mbps. 12. Which type of networking cable is more reliable, STP or UTP? STP is more reliable 13. Which is more expensive, UTP CAT5e cabling or STP CAT5e cabling? STP CAT5e is more expensive because it is shielded 14.
The Essay on Wireless Cable Bandwidth Speed Broadband
Wireless vs. Cable Imagine fast, consistent, bi-directional speeds (upload and download speeds are uniform) with no busy signals, disconnections or loss of bandwidth. Broadband Wireless eliminates the need for any dedicated phone lines, and therefore reduces your costs, while providing data rates much better than modems. Broadband Wireless supports bandwidth intensive applications such as graphic ...
How can you tell the difference between a patch cable and a crossover cable by examining the cable? Look for the label imprinted on the cable 15. What type of server serves up IP addresses to computers on a network? DHCP server 16. What type of protocol is used to present a public IP address to computers outside the LAN to handle requests to use the Internet from computers inside the LAN? NAT 17. How many bits are in an IPv4 IP address? 32 bits 18. What port does the SMTP protocol use by default? Port 25 19. Which protocol does a Web server use when transmissions are encrypted for security?
HTTPS 20. What type of server resolves fully qualified domain names to IP addresses? DNS server 21. What is the maximum length of a NetBIOS name? 15 characters 22. What is the name of the file that keeps associations between computer names and IP addresses on the local computer? Hosts file 23. What protocol is replacing the POP protocol used to receive email? IMAP 24. Approximately how many IP addresses are available for a single Class A IP license? Class B? Class C? 16 million, 65,000, and 254 25. What are IP addresses called that begin with 10, 172. 16 or 192. 168? Private IP addresses 6. In what class is the IP address 185. 75. 255. 10? Class B 27. In what class is the IP address 193. 200. 30. 5? Class C 28. Describe the difference between public and private IP addresses. If a network is using private IP addresses, how can the computers on that network access the Internet?
Public IP addresses are licensed and authorized to use the Internet. Private IP addresses are not authorized or licensed to use the Internet. A computer with a private IP address uses a proxy server to access the Internet. 29. Why is it unlikely that you will find the IP address 192. 168. 250. 0 on the Internet? IP addresses that begin with 192. 168 are private IP addresses. 30. If no DHCP server is available on a network, what type of configuration must computers on the network use for assignments of IP addresses? Static IP addressing 31. If a computer is found to have an IP address of 169. 254. 1. 1, what can you assume about how it received that IP address? The IP address was automatically assigned by Windows when it failed to lease an address from the DHCP server. The computer received an APIPA IP address. 32. What command can be used to cause Windows to release its IP address?
The Essay on Legislation passed to address computer crimes
Over the past month you could not pick up a newspaper without finding an article about the recent Denial of Service (DOS) attacks on E-commerce sites over the Internet. This increase in Internet security problems and crimes, is paving the way for tougher legislation in regards to monitoring and tracking computer hackers. We the people should ask ourselves how far we should allow the federal ...
Ipconfig /release 33. What is the purpose of the command, ping 127. 0. 0. 1? To verify that TCP/IP is configured correctly. Thinking Critically 1. You have just installed a network adapter and have booted up the system, installing the drivers. You open My Network Places on a remote computer and don’t see the computer on which you just installed the NIC. What is the first thing you check? a. Is File and Printer Sharing installed? b. Is the NetBEUI protocol installed? c. Are the lights on the adapter functioning correctly? d. Has the computer been assigned a computer name?
Answer: c. Are the lights on the adapter functioning correctly? 2. You work in the Accounting Department and have been using a network drive to post Excel spreadsheets to your workgroup as you complete them. When you attempt to save a spreadsheet to the drive, you see the error message, “You do not have access to the folder ‘J:\’. See your administrator for access to this folder. ” What should you do first? Second? a. Ask your network administrator to give you permission to access the folder. b. Check My Network Places to verify that you can connect to the network. c.
Save the spreadsheet to your hard drive. d. Using Windows Explorer, remap the network drive. e. Reboot your PC. Answer: c. Save the spreadsheet to your hard drive. b. Check My Network Places to verify that you can connect to the network. 3. Your job is to support the desktop computers in a small company of 32 employees. A consulting firm is setting up a private Web server to be used internally by company employees. The static IP address of the server is 192. 168. 45. 200. Employees will open their Web browser and enter personnel. mycompany. com in the URL address box to browse this Web site.
The Term Paper on Computers Connected Internet Network One
The History of The Internet Imagine talking about the latest elections with someone three thousand miles away without receiving a tremendous phone bill. Or sending a letter to a friend or relative and having it arrive one second later. How would it feel to know that any source of information is at your fingertips at the press of a button? All of these are possible and more with a system of ...
What steps do you take so that each computer in the company can browse the site using this URL? Answer: Make this entry in the Hosts file on each computer: 192. 168. 45. 200 personnel. mycompany. com 4. Linda has been assigned the job of connecting five computers to a network. The room holding the five computers has three network ports that connect to a switch in an electrical closet down the hallway. Linda decides to install a second switch in the room. The new switch has four network ports. She uses one port to connect the switch to a wall jack. Now she has five ports available (two wall jacks and three switch ports).
While installing and configuring the NICs in the five computers, she discovers that the PCs connected to the two wall jacks work fine, but the three connected to the switch refuse to communicate with the network. What could be wrong and what should she try next? Answer: Try connecting one of the non-working computers to a wall jack. If that works, then the problem is the switch, the cable connecting the switch to the wall jack, or the wall jack the switch is using. First try installing the switch on a known-good jack. Then replace the cable to the switch; then replace the switch.
