1. Electricity is the flow of electric charge (electrons).
2. Electric Charge is a property of subatomic particles.
3. Current is the movement of electric charge.
4. Voltage is the electric potential that exists to move a charge.
5. Power is the rate at which electric energy is flowing in a circuit.
6. Ohm’s Law: Power = Voltage x Current.
7. Resistance is a physical property that quantifies how well a charge can move through a material.
8. Ohm’s Law: Voltage = Current x Resistance.
9. Electric circuits provide a means to harness electrical energy and use it in our everyday lives.
10. Circuits require a voltage source to operate.
11. Circuits require a closed loop to operate; that is they need a path for the electric current to return to its source.
12. Circuits can be connected in either series or parallel.
13. Components connected in series have identical current, but different voltage.
14. Components connected in parallel have identical voltage, but different current.
Key Questions
1. What is electricity?
2. What are electric charge, current, voltage, and power, and how are they related? 3. Can current flow without a voltage source?
The Term Paper on Relationship Between The Current And Voltage
Aim: To investigate the relationship between Current and Voltage Scientific Knowledge The current and voltage of an electric circuit, is given by the formula V = IR. This is known as Ohms. Ohms Law is only applicable, when the temperature of the resistor is kept constant. Therefore Ohms law is only applicable to Ohmic conductors. An example of Ohmic conductors are metals and alloys at constant ...
4. How does the resistance of a material determine how much electric current flows through it? 5. Will current flow through an open (disconnected) circuit? Why or why not? 6. What is the difference between series and parallel connections? 7. Where do we find electric circuits in our lives?
Anticipatory Set
• Electricity and electric circuits are all around us. • Discuss examples of electric circuits and electricity. • In order to further explore the concepts of electricity a basic knowledge of the electric circuit is required. • Electrical engineers work daily with circuits.
Teaching Plan
General Plan
o Part 1: Introduce electricity
o Part 2: The electric circuit
o Part 3: Electric circuit activity
The accompanying PowerPoint presentation, Electricity.ppt, closely follows the following teaching plan.
• Part 1: Introduce electricity
o Define electricity as the physical phenomena associated with the flow or movement of electric charge. (10 min.) ▪ This is just a definition. Let the students ask questions about electricity and discuss, leading them to the definitions and explanations below. o Define electric charge as a fundamental property of some subatomic particles. (20 min.) ▪ Protons have a positive charge
▪ Electrons have a negative charge
▪ Neutrons have no charge (neutral)
▪ Particles of opposite charge are attracted to each other ▪ Particles of negative charge are repelled • Use North and South magnetic poles as an analogy ▪ The SI (Le Systeme International) unit for charge is the coulomb (C) • It takes 6.25 x 1018 protons to equal one coulomb! • This is 6,250,000,000,000,000,000 protons! • How many coulombs is 6.25 x 1018 electrons? (negative one coulomb) ▪ The space around an electric charge is called the electric field. ▪ Explain that a conductor is something which freely allows the motion of electric charge and an insulator is the opposite; it greatly resists the flow of charge. ▪ A buildup of electric charge on an insulator creates static electricity. • Use a balloon as an example demonstration. • Rub the inflated balloon on someone’s hair and watch the hair stand up in the presence of the excess charge! ▪ In a conductor, a buildup of charge will freely move through the conductor, resulting in electric current. o Define electric current as the flow of electric charge. (20 min.)
The Essay on Electric Charge And Public Electricity Supply
... Passing an electric current through gasses that glow with colored light creates neon lights seen out on the streets. Passing electricity through mercury ... start to flow back and forth between the objects. As a result the force weakens and the objects lose their charge. Dampness ... wall socket we close a circuit and electrons are allowed to move from the source of the electricity to the object. Afterwards ...
▪ Typically the electric charge is in the form of electrons ▪ As a result, electric current, and electricity in general, is often defined as the flow of electrons. This is not always a true definition, as electric current can be the result of the flow of other charged particles, so it’s best to stick with the idea that current is the flow of charge. ▪ In fact “conventional current,” which is what is used by all electrical engineers, is the flow of positive charge. ▪ The flow of charge in a current carrying wire is really just a flow of energy, transferred from one charged particle to the next. ▪ So it’s not electrons racing through a wire, it’s their charges. ▪ The actual electrons move much more slowly through the wire. In fact their movement is called electron drift. ▪ Use Newton’s Cradle as an example to help visualize this. [pic]
▪ The momentum moving through the balls that forces the ball at the far end to move almost instantaneously is like the electric current in a wire. The motion of all of the balls moving at once is like the actual motion of the electrons in the wire. ▪ The SI unit of current is the Ampere (A).
▪ Current is measured with an ammeter.
▪ Current can only flow in the presence of an electric field, often provided by a voltage source o Define voltage as the electric potential between two points. (10 min.) ▪ It is the potential for an electric field to cause an electric current to flow. ▪ Going back the Newton’s Cradle, the force of gravity that causes the first ball to move can be thought of as the voltage that causes the current to flow. ▪ The SI unit for voltage is the volt (V).
▪ How many volts are in
• a AA battery? (1.5 V)
• the wall outlet? (120 V)
• the power lines in the street? (about 13,000 V) • the large power lines? (up to 765,000 V) • lightning? ( about 100,000,000 V) ▪ Voltage is measured with a voltmeter.
o Define electric power as the rate at which electrical energy is transferred. (5 min) ▪ The SI unit for power is the watt (W).
The Essay on Electric Magnetic Fields Power Line
Homes are filled with electric magnetic fields (EMFs), EMFs are created every time anything electrical is used. Hair dryers, alarm clocks, micro waves and radios are just a few examples. All these appliances cause leukemia, a form of cancer. High EMF fields are not very unusual. EMFs can pass through walls, so one can also be exposed to them from power lines and transformers. Using a hair dryer ...
▪ Ohm’s Law: Power = Voltage x Current o
Define resistance as a physical property which describes how well electric current flows in a material (5 min) ▪ The SI unit for resistance is the ohm (Ω) ▪ Ohm’s Law: Voltage = Resistance x Current o Go through a simple example of Ohm’s law using a single resistor connected to a voltage source and calculate the current being drawn and the power being consumed. (15 min) ▪ If a 5 Ω resistor is connected to a 12V battery, how much current is drawn from the battery? • Current = Voltage / Resistance = 12V / 5 Ω = 2.4A ▪ How much power is the resistor consuming? • Power = Voltage x Current = 12V x 2.4A = 28.8 W
• Part 2: The electric circuit
o Define the electric circuit as a connection of two or more components to form a closed loop. (5 min) o The closed loop is necessary to allow the electric current to flow from one point of the voltage source to the other (5 min) ▪ Remember, a voltage is the electric potential between two points. o Circuit elements can be connected in either series or parallel configurations (20 min) ▪ Series components are connect in line with each other. • They provide a single path for the current to flow. • Therefore, they share the same current • Components in series have the same current • They divide the voltage among themselves • Components in series have different voltages • The different voltages add up to the original total voltage of the voltage source ▪ Parallel components are connected side by side. • Each component provides a different path for the current to flow • Components in parallel have different currents • The different currents add up to the current in the voltage source • Components in parallel have the same voltage o Use the Christmas light example. If one light goes out, do they all go out? Does this mean the lights are series or parallel? (If they all go out, it’s series, if not it’s parallel. If SOME go out, then it’s a combination of series and parallel!) (5 min) o Discuss other examples of electric circuits from the tiny (microprocessors) to the large (the power lines).
(5 min.)
• Part 3: Electric circuit inquiry (30 min)
o Break the students up into groups of 4 or less. o Hand out the activity sheets and materials
The Essay on Series And Parallel Circuits
... patterns. A series circuit is one that the components are connected end to end so that current has only one ... between voltage, current, and resistance. (V = IR) When more then one resistor is connected to a circuit they can be in either series or parallel ...
o They are building simple circuits with batteries for the voltage sources and small light bulbs for the components. o Be sure to help them connect the circuits, as they probably have never done so before o They connect the bulbs in both series and then parallel configurations o They measure the voltages and currents of each bulb in both configurations to verify the properties of series and parallel connections o As the students perform the experiments, stress the closed loop idea in the circuits, as well as the basic definitions of electricity. ▪ What is the battery doing?
▪ Where is the current flowing?
▪ Do your measurements make sense? Why?
o By the end the students should be able to calculate the power and resistance of the lamps from their voltage and current measurements.
