Measurement of Free-Fall Acceleration Introduction Galileo Galilei (1564-1642), the man first accredited with the correct notion of free-fall with uniform acceleration, stated that “if one were to remove entirely the resistance of the medium, all materials would descend with equal speed.” Today, this statement holds true for all objects in free-fall near the Earth s surface. The purpose of this experiment is to verify Galileo s assertion that acceleration is constant. In addition, the magnitude of acceleration will be calculated. Theory By definition, acceleration is the rate of change of velocity with respect to time. Instantaneous acceleration is the derivative of velocity with respect to time. a (t) = dv / dt.
average acceleration is the change in velocity during a time interval, Dt, divided by the length of that interval, aave = Dv / Dt. In this experiment, average acceleration of gravity will be determined by measuring the change in position of a falling object at regularly timed intervals. With this, average velocities for these intervals will be calculated. A graph of the average velocities versus time should give a straight line whose slope is the acceleration of gravity (g).
Apparatus To determine the acceleration of gravity the Behr apparatus will be used. The device consists of two vertical conducting wires, a thin strip of paper held between them, and a metal-girdled weight designed to fall between the wires along the length of the paper strip.
The Essay on Lab Report Acceleration Time Velocity 8710
Hypothesis: As slope increases, acceleration increases. Introduction: Speed is the distance traveled per unit time, velocity at any given moment is the slope of the tangent line through any relevant point on the graph, acceleration is the rate at which an object changes its velocity, and instantaneous acceleration is acceleration at any particular instant of time or the limiting value ∆ ...
A spark timer transmits a high voltage electric pulse to the wires approximately 60 times a second. Every time a pulse is transmitted, two main sparks flow through the system. One spark passes from one wire to the metal girdle around the weight. The second spark causes a small burn in the paper, marking the location of the weight at that instant. Procedure Tur on the electromagnetic power supply and suspend the weight from the end of it. Confirm that the weight falls smoothly into the cup at the base of the apparatus when the electromagnet switch is turned off.
Run this test run about three or four times before you continue. Next, draw a fresh strip of paper from the base of the device and clamp it in place. Turn on the electromagnet, and suspend the weight at the end of the magnet. Hold down the spark switch, and then immediately turn off the electromagnet power supply. The weight should fall down to the base of the apparatus, causing sparks to pass between the two wires and itself.
Turn off the power to the spark timer and inspect the paper strip. A series of burns should be visible along the length of the paper. Remove the paper strip from the apparatus and immediately mark the spots with a pen or pencil to see them more clearly. Data and Results The following table shows the data calculated for the experiment. The spots found on the paper strip are shown as (n).
The distance of the metal girdle along the strip is denoted by (x).
Velocity is (v) and acceleration is (a).
The estimated time (Dt) for this test was 60. 2 x 0. 7 s-1.
Calculations of distance, velocity, and acceleration of metal girdle. n x n (cm) xn+1 – x n (cm) xn+1 – x n / Dt = v n (cm / s ) vn+1 – v n (cm / s ) vn+1 – v n / Dt = a (cm / s 2) 1 0. 00 2 0. 70 0. 70 x. 02 42.
1 x 2 3 1. 43 0. 73 x. 04 43. 9 x 3 1. 8 x 5 108 x 302 4 2.
43 1. 00 x. 04 60. 2 x 3 16. 3 x 6 981 x 373 5 3. 72 1.
29 x. 04 77. 7 x 3 17. 5 x 6 1054 x 373 6 5. 27 1.
55 x. 04 93. 3 x 3 15. 6 x 6 939 x 372 7 7. 07 1. 80 x.
04 108. 4 x 4 15. 1 x 7 909 x 432 8 9. 16 2. 09 x. 04 125.
The Essay on Science – Does Mass And Weight Affect Acceleration?
Hypothesis: The heavier the car the slower ( the more the mass the slower), the more weight(force) we added the faster. Experiment: Materials: Trolley Elastic cords for accelerating trolley Rod for attaching elastic cord to trolley Ticker-timer with power supply unit Ticker-tape Sellotape Process: 1.Thread a length of ticker-tape through a ticker-timer and attach the end to a trolley. 2.Pull a ...
8 x 4 17. 4 x 8 1047 x 494 9 11. 5 2. 32 x.
04 139. 7 x 4 13. 9 x 8 837 x 491 10 14. 1 2.
61 x. 04 157. 1 x 4 17. 4 x 8 1047 x 494 11 17.
0 2. 90 x. 04 174. 6 x 4 17.
5 x 8 1054 x 494 12 20. 1 3. 15 x. 04 189. 6 x 5 15. 0 x 9 903 x 552 13 23.
6 3. 45 x. 04 207. 7 x 5 18. 1 x 10 1090 x 615 14 27. 2 3.
65 x. 04 219. 7 x 5 12. 0 x 10 722 x 610 15 31. 2 3. 98 x.
04 239. 6 x 5 19. 9 x 10 1198 x 616 16 35. 4 4.
20 x. 04 252. 8 x 5 13. 2 x 10 795 x 611 17 39. 9 4. 52 x.
04 272. 1 x 6 19. 3 x 11 1162 x 676 18 44. 7 4.
72 x. 04 284. 1 x 6 12. 0 x 12 722 x 731 19 49. 7 5. 00 x.
04 301. 0 x 6 16. 9 x 12 1017 x 734 20 55. 0 5. 33 x. 04 320.
9 x 6 19. 9 x 12 1198 x 736 21 60. 6 5. 60 x. 04 337. 1 x 6 16.
2 x 12 975 x 734 22 66. 5 5. 87 x. 04 353. 4 x 7 16. 3 x 13 981 x 794 23 72.
5 6. 07 x. 04 365. 4 x 7 12. 0 x 14 722 x 851 24 78. 9 6.
35 x. 04 382. 3 x 7 16. 9 x 14 1017 x 855 25 85.
8 6. 68 x. 04 402. 1 x 7 19.
8 x 14 1192 x 857 26 92. 7 6. 93 x. 04 417. 2 x 7 15. 1 x 14 909 x 853 27 99.
9 7. 15 x. 04 430. 4 x 7 13. 2 x 14 795 x 852 28 107.
4 7. 46 x. 04 449. 1 x 8 18. 7 x 15 1126 x 916 29 115. 0 7.
74 x. 04 465. 9 x 8 16. 8 x 16 1011 x 975 30 123.
1 8. 01 x. 04 482. 2 x 8 16.
3 x 16 981 x 975 31 131. 1 8. 20 x. 04 493. 6 x 8 11.
4 x 16 686 x 971 32 139. 9 8. 55 x. 04 515.
0 x 8 21. 4 x 16 1288 x 978 33 148. 7 8. 80 x. 04 530. 0 x 9 15.
0 x 18 903 x 1034 aAVE = 9. 47 x. 69 m / s 2 s = 9. 47 x. 78 m / s 2 slope (m) of graph = 8. 9 Conclusions The average value of acceleration for each time interval is closer to the desired value of 9.
8 m / s 2 than the calculated slope of the velocity-time graph. The average of uncertainties for the calculated accelerations is a better as choice of uncertainty because it provides a narrower field of uncertainty than does standard deviation. In conclusion, the calculated value of 9. 47 x. 69 m / s 2 for acceleration is acceptable. 352.
