•Nanotechnology in Aerospace Materials
•Introduction
Figure 1. The aerospace industry is under pressure to improve it’s environmental footprint, primarily by making aircraft more efficient. Image credit: Bureau of Labor Statistics.
•There are few industries where the applications of nanotechnology are so clearly beneficial as in the aerospace industry. The primary development goals match almost exactly with the advantages offered by using various nanomaterials in the place of traditional bulk metals like steel. •The aerospace industry is one of the most important heavy industries in the world. Countless companies rely on the ability to ship products and people around the world with the speed that can only by achieved by air. The aircraft manufacturing market was worth xxx billion in 20xx, and the bulk of this was accounted for by military spending.
•Along with this huge economic value, however, comes huge consumption, and one of the largest carbon footprints on the planet relative to the size of the market. For this reason, the major drivers in current aerospace R&D are towards lighter construction materials and more efficient engines – the overall goal being to reduce fuel consumption and carbon emissions associated with air travel and air freight. The significant interest in nanotechnology for the aerospace industry is justified by the potential of nanomaterials and nanoengineering to help the industry achieve this goal. •This article will review some of the nanomaterials which are already being applied in aerospace manufacturing, and the benefits they can provide. •Nanostructured Metals
The Term Paper on Smart Materials in Aerospace Industry
Within each subsection, we will draw a relationship between the properties of the smart material and its molecular mechanism. This is followed by presenting an outline of their recent and future applications, and the experimental procedures and results done in recent researches to show the feasibility of these applications. In the Discussion section, we will be delving into the cost-effectiveness ...
•Bulk metals with some nanoscale structure are already widely used in aircraft manufacturing. It is now well known that nanostructured metals – exhibit considerably improved properties compared to their counterparts with microscale or larger grain structure. •This is particularly noticeable for properties which are crucial for materials used in aircraft – primarily yield strength, tensile strength and corrosion resistance, coupled with low density which helps keep the total weight of the aircraft down. •
•Figure 2. Bulk nanostructured metals exhibit much better mechanical properties and corrosion resistance than their counterparts with larger crystal structures. Image credit: Los Alamos National Laboratory. •Polymer Nanocomposites
•Various nanomaterials have been used as filler materials to enhance the properties of structural and non-structural polymers used in aircraft construction. The most commonly used nanomaterials include nanoclays, carbon nanotubes, nanofibres, and graphene. •Carbon nanotubes in particular have been shown to give excellent advantages when used as fillers in various polymers, due to their exceptional stiffness, toughness, and unique electrical properties.
•Nanocomposites typically have superb weight-to-strength ratios, and enhanced resilience to vibration and fire, making them ideal for use in the aviation industry. The properties of the nanofillers, like the conductivity of nanotubes, for example, can create interesting opportunities for multifunctional materials. •The properties of polymers enhanced by nanomaterial fillers are so well-tuned to the requirements of aircraft manufacturers, that they are actually being used to replace some of the metals used in the airframes. This obviously brings along huge weight savings, and often cost savings as well. •Tribological and Anti-Corrosion Coatings
The Essay on Rubbing Alcohol Iron Corrosion Metals
Corrosion and rubbing alcohol vs. corrosion and hydrogen peroxide " Are brass, lead, iron, and aluminum more likely to corrode in solutions of rubbing alcohol or hydrogen peroxide?" a. Definition-corrosion, rust, oxidation Corrosion is the atmospheric oxidation of metals. Rusting is essentially a process of oxidation in which iron combines with water and oxygen to form rust. Rust is the reddish- ...
•Another major trend in the materials used in aircraft is towards nanocoatings to enhance the durability of metals. In particular, magnesium alloys, which are far lighter than steel or aluminium, are prone to corrosion, due to the high chemical reactivity of magnesium. Coatings can help prevent corrosion, but the type typically used contain chromium complexes which are a highly toxic pollutant. •Materials used for these novel anti-corrosion nanocoatings include silicon and boron oxides, and cobalt-phosphorous nanocrystals.
•Nanocoatings are also now being used on turbine blades and other mechanical components which have to withstand high temperatures and friction wear. Tribological coatings can drastically lower the friction coefficient and improve resistance to wear – this greatly improves the efficiency of the engines. •Many nanostructured and nanoscale coating materials have been suggested as possible friction modifying agents, such as carbides, nitrides, metals, and various ceramics. •
•Figure 3. The defense sector drives a lot of the innovation in many industries, and aerospace is no exception. High-performance military aircraft require exceptional materials, which will eventually find their way into commercial vehicles. Image credit: Penn State University.
•Conclusion
•This is just a brief overview of some of the nanomaterials being used in aerospace. The drive for lighter and more efficient air vehicles has led to the rapid adoption of nanotechnology in aerospace manufacturing. •The main roadblock, as with many industries looking to adopt nanotechnology, is caused by uncertainty over the environmental and health and safety implications of these materials. Whilst nanomaterials can often be less toxic than the current materials used, the effects of long-term exposure to these novel materials are still uncertain.
•The potential of nanotechnology in the aerospace industry cannot be denied, however. Outside of airframe and component materials, nanotechnology applications have been found in lubricants, fuel, adhesives and many other areas. •Nanotechnology is also helping engineers to create vehicles with the necessary properties to endure the harsh conditions of space.
The Essay on The Information Age Is Upon Us The Raw Materials Are
The information age is upon us. The raw materials are ones and zeros. The technology used to transport the ones and zeros provides numerous opportunities for entrepreneurs, scientists, and engineers. Telecommunications is dynamically changing the way we work, learn, communicate, and view society. At no other time in history have so many people been given the ability to exchange ideas, sell their ...
