Purpose
The author intends to distinguish sharp differences in national origin of production and distribution of motor vehicles that exist b/w American Big Three producers (Chrysler, Ford and GM) and Japanese-owned manufacturers (Honda, Nissan, Mazda, Mitsubishi, Subaru, Suzuki, Daihatsu and Isuzu).
By distinguishing b/w these differences, a vehicle may be classified as domestic or foreign made. It provides a locational framework for understanding what an American automobile is. Although few are 100% domestic or foreign, the percentage of national origin of any vehicle sold in the U.S. can be determined.
Difference b/w domestic and foreign made
Sorting domestic from foreign cars is a geographical study because the distinction comes from where the carmakers carry out different stages of production. The distinction was clear until the 1980’s, before this time American cars were built in the U.S. by American companies, labor and parts. Foreign cars were built in foreign countries by foreign companies, labor and parts. The appearance was also different. American cars exceeded 5 meters in length and had engines w/ displacements of 4 liters and 6 or 8 cylinders. Foreign automobiles were over a meter shorter than American models and contained 4 cylinder engines w/ only 2 liter displacements. In 1955, foreign vehicle manufacturers only held 1% of the American car market- Europeans accounting for most foreign sales. During 1970’s, Japanese-owned companies overtook the Europeans as leading exporters of cars to the U.S., but distinction b/w foreign and American cars remained well defined.
The Essay on Japanese vs American Cars
People think that American products are the best, in the entire world. But this is false thought. Cars are one of these products. Based on opinion of the experts in cars manufacturing and feedbacks of cars’ drivers, Japanese cars are better than American cars in many features. To illustrate this preference. A comparison between Japanese and American cars will be mentioned in this report, based on ...
However, the appearances of both foreign and domestic vehicles changed as American manufacturers responded to demands for more fuel efficiency by shortening and decreasing the size similar to their Japanese competitors. At the same time, Japanese companies began to build larger, more luxurious cars to meet the demands of customers who wished to trade in the original smaller models.
Other changes that reduced the difference b/w foreign and American cars included the interest that American firms took in importing Asian produced models to the U.S. Also, Japanese firms began opening production facilities in North America, predominantly in the U.S., in fear of having their American sales resticted by import Quotas.
as domestic or foreign, but so do the components that are used to build them. Components can range from nuts and bolts to engines and transmissions. American and foreign companies manufacture their own parts and also purchase them from outside suppliers. Identifying national origin
The easiest and most widely used indicator of domestic or foreign production is calculated by the EPA under the Corporate Average Fuel Economy regulations. According to these regulations, in order for a vehicle to be domestic, it must have the combined fuel economy in miles/gallon must exceed a specified average of 27.5 miles/gallon (1993).
The combined fuel economy of foreign vehicles must also exceed a specified average (which was not given but is lower than that of domesic).
The EPA also considers a vehicle domestic if at least 75% of its parts come from the U.S. or Canada. The EPA also considers Mexican content as domestic under 1993 NAFTA. Overall, government efforts to classify all vehicles into 2 groups have failed because no vehicle is entirely domestic or foreign made. Therefore, car companies and models are placed on a continuum from relatively low to high percentages of domestic content.
Selling price
All new automobiles sold in the U.S. have window stickers showing the suggested retail price. The country where each model is manufactured is required to be identified to inform the consumer. The retail price of a motor vehicle includes direct and indirect costs.
The Essay on Wal mart Is The Largest American Retailing Company There Are Close
Wal-Mart is the largest American retailing company. There are close to 3.000 Wal-Mart discount stores in U.S. alone. Nowadays, many people think of a Wal-Mart as the symbol of American consumerism, however, not many of them do realize that the word American is the least applicable, when it comes to describing the essence of Wal-Mart as commercial enterprise. This retailing company is nothing but ...
Direct costs that are factored into the selling price are costs of production- res. and dev., purchase or production of components, the assembly of the components into the finished vehicle, and transport costs from the assembly plant to the dealer. These costs account for two-thirds of the sticker price, one half of this price goes to buying parts for assembly. The cost of developing a new model is measured in billions of dollars. Chrysler spent 1 billion dollars to develop large models such as Dodge Intrepid, Eagle Vision, the New Yorker and a half billion on the Neon. Ford spent 6 billion on developing the Contour and the Mystique. GM spent 4 and a half on the Saturn. Before building a new model, a company first conducts research to identify potential buyer groups and demands. Next, individual parts must be designed and machines be built to make parts and assemble vehicles. Ofcourse, experiments are run on the finished prototype to test road use. Honda, Toyota and Nissan have design studios in southern Cal. and Ann Harbor, Mich. The purpose of these studios is to modify Japanese-engineered models to preferences and driving conditions of N. America.
Indirect costs account for another one-third of the sticker price and include- central administration, corpoprate profit, marketing, and dealer expenses. They are divided b/w the country where the manufacturer’s headquarters are located and the country where the vehicle is sold. Executives and shareholders reside in the country where company originated, even if production facilities are not. Chrysler, Ford and GM are considered American companies because their corporate headquarters are in Detroit. Toyota and other Japanese companies sell in U.S. but have headquarters in Japan. Marketing and advertising costs may account for as much as 5% of the total sticker price. The advertising budget averaged $875/vehicle in 1993. Regardless of where vehicles are manufactured, companies selling in the U.S. hire American advertising agencies and place ads on American TV and newspapers.
The Term Paper on Assignment: Leadership and Cost Company
COST Company tried their best to grasp the sophisticated technology, thus the COST Company used highly to training the professionals, like the geologists, geophysicists, and the engineers. The COST Company also trained the skilled and semiskilled labor that run the company’s field operations. On the other hand the professional labor and the skilled labor, the two groups always occurs the clashed. ...
Final Assembly
The changing distribution of final assembly plants began in the 1960’s with the constant growth of new models of automobiles. Companies closed their coastal assembly plants and converted interior ones to produce 1 or 2 specialized products to distribute throughout N. America. Due to their fragility, finished vehicles are exppensive to transport. Consequently, assembly plants are located near customers and dealers. Demand for for the is essential to this strategy or it wouldnot make sense to spend 1 billion dollars on a final-assembly plant. Since the annual capacity of a typical plant is 200,000 vehicles, a manufacturer will dedicate a plant to one specific product.
Two-thirds of vehicles sold in U.S. in 1992 were produced at American assembly plants, rest were made in other countries. The Big 3 assembled in the U.S. 80% of vehicles they sold there and one-third of vehicles sold in U.S. by foreign-owned manufacturers were assembled there also. Nine-tenths of the value of vehicles sold in the U.S. by the Big 3 had domesic content.
Vehicles sold in the U.S. but assembled elsewhere came from 3 areas- Canada, Mexico and eastern hemisphere countries. In 1992, 13% of all cars and trucks sold in U.S. were assembled in Canada, 2% in Mexico and 17% in eastern hemisphere countries (Japan, Germany and South Korea).
Honda is the first Asian carmaker to build an assembly plant in N. America and operates 2 plants a short distance apart- Maryville and East Liberty Ohio and another in Alliston, Ontario. The reason for Honda’s aggression to establish assembly plants overseas is because there is little chance for increasing sales in Japan. Honda sold twice as many cars in N. America than in Japan in 1992 and has become the leading exporter of cars in N. America. Two other large sellers are Toyota and Nissan. Toyota has a final-assembly plant in Georgetown Ky., and Nissan has one in Smyrna, Tenn. where trucks are a large portion of the output.
Components
The Term Paper on Electric Cars
Electric car is basically a type of automobile which uses electric motor rather than a gasoline engine for impulsion or forward motion, while these cars are basically the automobiles power-driven by electricity and is used by the people for transportation purpose. Different type of onboard battery packs are used for providing power to these electric motors. Normally these cars come under the ...
Not only do the final prototypes of cars have to be classified
