Version 4.0 (versions for DOS, Windows 95/98 and Windows NT) Copyright (c) 1994-1998 PowerQuest Corporation. All rights reserved. U.S. Patents 5,675,769 and 5,706,472. Other patents pending in 6. Security Problems Using Shared Drive Letters Under Windows 95 Don’t forget to back up your hard drive(s) before using PartitionMagic. While this version of PartitionMagic has been thoroughly tested and is quite safe, power failures, operating system bugs, and hardware design bugs can put your data at risk. No software program, including PartitionMagic, is perfect. BEFORE USING ANY UTILITY THAT MAKES SUCH EXTENSIVE CHANGES TO YOUR HARD DRIVE, To back up your system, we recommend using PowerQuest’s Drive Image(tm) or Drive Image Professional(tm).
Drive Image is a state-of-the-art disk imaging tool that allows you to create an image of your entire system (an exact sector-for-sector copy) which can easily be restored. This allows you to run PartitionMagic with the security of knowing that you can get your system back up and running quickly if you run into problems.
In addition to the documented partition type support, PartitionMagic 4.0 also supports FAT16X, FAT32X, and ExtendedX partitions. PartitionMagic requires at least 32 MB RAM for moving or resizing B. Shut down all other apps before running PartitionMagic ——————————————————— In Windows 95 and Windows NT, PartitionMagic should not be invoked while any other applications are running. Make sure you close any running applications before starting PartitionMagic. C. Bad Sector Checking is ON by default ————————————— Be aware that PartitionMagic ships with Bad Sector Checking turned ON by default in Preferences. This ensures that data is not moved or copied to bad disk sectors. However, this causes the Create, Move, and Resize operations to slow down considerably. The quality of modern disks is such that bad sectors are rare. Furthermore, most modern computers can determine when a sector is bad; if this happens, the computer automatically marks the sector as bad (so it will never be used) and then uses an alternate sector. If you feel confident that there are no bad sectors on your system, and you want to improve the performance of PartitionMagic, then turn off Bad Sector Checking (by checking the appropriate boxes in the “Skip bad sector checks” listbox in Preferences).
The Essay on Operating System Windows One Carries
Windows 95 or NT When one asks himself or another, Which Operating system will better fill my needs as an operating system Windows 95 or Windows NT version 3. 51. I will look at both operating systems and compare the qualities of each one in price, performance, stability and ease of use. The final results will give one a clear view to the superior operating system for years to come. As one already ...
Another way to verify that there are no bad sectors on your disk is by running the Windows 95 ScanDisk utility and doing a surface scan before launching D. Native vs. Boot-Mode execution in Windows 95 and Windows NT ————————————————————– PartitionMagic for Windows 95 and Windows NT are both full Win32 GUI applications that will allow you to manipulate your partitions natively, but with one exception: If you choose to move or resize a partition that cannot be locked (e.g., one that has files open on it), PartitionMagic stores the commands to be executed, reboots your computer, and applies the changes in a “boot mode” text-mode E. Backing up your BOOT.INI file in Windows NT ———————————————- PartitionMagic for Windows NT needs to temporarily replace your BOOT.INI file after performing the disk manipulation operations (it switches them back once it has finished performing the operations and rebooting).
If a failure occurs during the NT reboot phase, your BOOT.INI file may not be restored properly. It is a good idea to back up your BOOT.INI file before running PartitionMagic for Windows NT. F. Volume sets and stripe sets on Windows NT ——————————————– Currently PartitionMagic does not support moving and/or copying of G. Creating a second primary partition under Windows NT ——————————————————- The Windows NT and Windows 95 versions of PartitionMagic differ in their behavior in regard to creating primary partitions. Specifically, if the user creates a second primary partition on a physical disk using the Windows 95 (or DOS) versions, PartitionMagic automatically creates the new primary partition as Hidden (since some operating systems have a problem with seeing multiple visible primary partitions on the same disk).
The Term Paper on Win 95 Tips Platform Windows
Accessibility Tips Controlling Windows Access Platform: Windows 95 User Level: Advanced Submitted by: Nite Force To lock anyone out of certain features of Windows 95 including run and settings options in the start menu, or to allow only certain applications to be ran by a particular user, you may do the following: If you haven't already done so, enable Windows passwords in the control panel ( ...
Because Windows NT does not have a problem with multiple visible primary partitions, the Windows NT version of PartitionMagic creates the new second primary partition as Unhidden. However, like the Windows 95 version it will automatically hide other primary partitions when performing a Set Active operation. H. Windows NT default swap file location —————————————- Windows NT might put the swap file on a partition other than the Boot Partition, thus creating a condition where an open file will be on a partition other than the Boot Partition. This will cause you to have open files and force PartitionMagic to execute in boot mode. PartitionInfo is the new GUI version of PARTINFO.EXE (which shipped with PartitionMagic 3.x, and ships with PartitionMagic 4.0).
There are versions of PartitionInfo for Windows 95/98 and Windows NT, but not for DOS. DOS users will need to run PARTINFO.EXE. Also, note that PartitionMagic and PartitionInfo cannot be run simultaneously. J. MOUSE.COM issue running PartitionMagic under Windows 3.x ———————————————————– By default, Windows 3.x disables MOUSE.COM in the AUTOEXEC.BAT file and MOUSE.SYS in the CONFIG.SYS file. This makes Windows 3.x use its own proprietary mouse driver. When PartitionMagic is run from Windows 3.x with this situation, MOUSE.COM is never called, and PartitionMagic runs without a mouse. You can have a mouse with PartitionMagic under Windows 3.x if the MOUSE.COM mouse driver is loaded before Windows 3.x is loaded (this will require you to edit your AUTOEXEC.BAT or CONFIG.SYS file).
The Essay on Fixed Disk Windows Program Drive
SPEEDING UP WINDOWS 95 Windows 95 with certain minor alterations and software upgrades can operate at a faster more efficient speed. With this Windows 95 tutorial, all the things you do now will be easier and faster, and what you always wanted to know is now here for you to learn. This tutorial will provide you with insightful instructional and informative tips about free programs such as TweakUI, ...
K. Uninstalling PartitionMagic under Win3.x ——————————————- The “PowerQuest PartitionMagic 4.0 Pro” program group is not removed when you uninstall PartitionMagic under Win3.x. This can be done L. Mixed IDE/SCSI drive configurations under Windows NT ——————————————————- In a configuration with mixed IDE and SCSI hard drives, Windows NT does not always see the boot drive as the first physical hard drive. PartitionMagic displays drives in the order Windows NT reports them. As a result, you may see your boot device as Drive 1, 2, etc. This does not cause problems for PartitionMagic except when setting a new active partition. Also, PartitionMagic may incorrectly report that there is no active partition on your system. To change your active partition, be sure that you identify which drive is the boot drive. With this configuration there is the possibility that your BOOT.INI file can be corrupted, so it is a very good idea to back up your BOOT.INI file before running PartitionMagic. M. Checking NTFS Partitions under DOS version of PartitionMagic ————————————————————— On rare occasions, checking an NTFS partition while running the DOS version of PartitionMagic can take an unusually long time. Since the Move, Copy, and Resize operations all perform a check both before and after performing the function, it can impact each of these operations. (Note: the DOS version is executed when the user runs the boot-mode version of PartitionMagic under Windows 95/98, or when running the PartitionMagic 4.0 can only check partitions that it can lock (i.e, that have no open files on them).
This may sometimes cause the Check O. OS/2 and Linux installation programs for PartitionMagic ———————————————————- The distribution media contains PartitionMagic installation programs for OS/2 and Linux operating systems. These programs create a bootable floppy disk set that runs the DOS GUI version of PartitionMagic 4.0. You can find the OS/2 installation under the OS2INST directory, and the Linux installation under the LINUX directory. P. drive letter changes under Windows 95 and NT ———————————————– In some situations, operations done under PartitionMagic for Windows 95 will cause drive letter changes made under the Windows NT operating system to be lost. In these cases you will need to set up your drive letter changes again (using either PartitionMagic for Windows NT or Disk Administrator under NT) to restore your original configuration. MagicMover has a known issue involving an ‘=’ alone on a line in system files (i.e., WIN.INI, SYSTEM.INI) under Windows 95 and Windows 3.x.
The Essay on Versions Of Windows Dos System Fat
The very first operating system used on the earliest IBM PCs was called simply the Disk Operating System, abbreviated DOS. There are few PC users who have not heard of DOS; at one time it was used on pretty much every PC, and it is still around today in many different forms. Microsoft's version of DOS is the most common one, and is called MS-DOS-with the "MS" abbreviation being rather self- ...
If an error occurs, make sure there are no single ‘=’ characters on a line in these system files. Also, under no circumstances should you use MagicMover to move the BootMagic directory (BTMAGIC.PQ) as this will cause serious damage to your BootMagic setup. R. Windows NT may improperly detect the size of large hard drives —————————————————————– Windows NT 4.0 may incorrectly report the size of hard drives larger than 10GB. Most often it reports them as 8GB drives. This problem may be solved by 1) installing Service Pack 3, and 2) installing the postsp3 patch ata-fixi.exe. This patch can be download from: ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/nt40/hotfixes-postSP3/atapi-fix/ S. Color palette issues installing Windows NT version —————————————————— If you run the Windows NT version of PartitionMagic immediately after installation, occasionally you may see color palette problems. We recommend rebooting Windows NT before running PartitionMagic – 16 MB of RAM (32 MB for FAT32 support).
The Essay on Installation In Windows 3 1 From File Rom Encyclopedia
README. DOC FILET his file contains the latest information on the Encyclopedia of Electronics. This is version of the Encyclopedia of Electronic Circuits has 1000 electronic circuit schematics. Schematics are viewed with the SuperCAD viewer (VIEW), which is a reduced version of SuperCAD and is designed for faster and simplified operation when used with the Encyclopedia. The Encyclopedia also has ...
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard – Windows 95a or later (Windows 95b required for FAT32 support) – Intel/486 DX or later (33 mhz) – 16 MB of RAM (32 MB recommended for PartitionMagic to operate on FAT32 partitions).
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard disks (greater than 4 GB).
– Windows NT 4.0 Workstation (NOTE: Windows NT 3.51 is not supported by native versions of PartitionMagic, but is supported by the DOS GUI and – Intel/486 DX or later (33 mhz) – 8 MB of RAM (16 MB for PartitionMagic to operate on NTFS partitions, 32 MB recommended for PartitionMagic to operate on FAT32 partitions).
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard disks (greater than 4 GB).
– MS-DOS 5.0 (6.2 or later recommended) or compatible – If you run PartitionMagic from DOS: Turn off 3rd party disk caches. Deactivate or unload any TSR programs that access or modify the partitions being changed. Do not run PartitionMagic from a compressed drive. – Running PartitionMagic from Windows 3.1: After using PartitionMagic, it is normal to get an error message when starting Windows 3.1 stating that the swap file is corrupt. Windows 3.1 is designed knowing that disk utilities may move the clusters of the swap file. When a move is detected, the error message is given. To fix the swap file, click on the 386 Enhanced icon in Control Panel, then on the Virtual Memory button. Delete the swap – This release of PartitionMagic handles ASCII filenames. PartitionMagic does not yet handle double byte character sets such as Japanese, resulting in two known limitations: (1) Converting a partition from FAT to HPFS can produce incorrectly translated filenames. (2) An attempt to specify or set – Progress bars are an estimation only and can pause for several minutes, even though PartitionMagic is still working correctly. If you think your computer has locked up, please be patient and PartitionMagic will finish the 6.
The Term Paper on Gentoo Install Guide File System
Gentoo Gentoo- web is a distribution that has 3 different install methods. You can just install from the CDs known as stage 3. You can install the base system from CD known as stage 2 and then custom compile the rest of the OS from scratch to bring it to stage 3. This makes the system faster and more responsive but takes some time. Last is the stage 1 install where EVERYTHING is built from ...
SECURITY PROBLEMS USING SHARED DRIVE LETTERS UNDER WINDOWS 95 —————————————————————- Be aware that under Windows 95, if you are using shared privileges to share drives and you add or remove a partition (causing the drive letters to change), you may experience some security problems. The following is a possible example of a security problem sharing drive letters under Windows 95 after partitioning your hard drive. Before you partitioned your hard drive, your CD-ROM drive had shared privileges for drive D:. After you added a partition, your CD-ROM became drive E:. However, because your CD-ROM (drive D:) had shared privileges and you added a partition, your shared privileges would still be assigned to drive D:.
Therefore, you could potentially be sharing information from your D: partition that you do not wish to share. To resolve this problem, you may want to check, and if necessary reset your shared privileges in Windows 95 after you have added or removed a partition. You will not be affected by this situation if you share a directory and its parent directory and its parent drive letter changes, because the shared PowerQuest has a free monthly electronic newsletter that is dedicated to official announcements regarding PartitionMagic. Signing up on the list will give you all the information you need regarding product tips, bugs, and patches. Just go to our home page (www.powerquest.com), enter your email address into the space provided and hit the “Sign me up” button. You will be e-mailed a response verifying your subscription. ============================================================================ Web site: http://www.powerquest.com
Bibliography:
PartitionMagic(r) by PowerQuest(r) Version 4.0 (versions for DOS, Windows 95/98 and Windows NT) Copyright (c) 1994-1998 PowerQuest Corporation. All rights reserved. U.S. Patents 5,675,769 and 5,706,472. Other patents pending in the U.S.A. and elsewhere. TABLE OF CONTENTS —————– 1. Back up Your System! 2. File System Support 3. Known Issues 4. Minimum System Requirements 5. General Usage Notes 6. Security Problems Using Shared Drive Letters Under Windows 95 7. Partition Magician Newsletter 1. BACK UP YOUR SYSTEM! ———————– Don’t forget to back up your hard drive(s) before using PartitionMagic. While this version of PartitionMagic has been thoroughly tested and is quite safe, power failures, operating system bugs, and hardware design bugs can put your data at risk. No software program, including PartitionMagic, is perfect. BEFORE USING ANY UTILITY THAT MAKES SUCH EXTENSIVE CHANGES TO YOUR HARD DRIVE, YOU SHOULD BACK UP YOUR DATA! To back up your system, we recommend using PowerQuest’s Drive Image(tm) or Drive Image Professional(tm).
Drive Image is a state-of-the-art disk imaging tool that allows you to create an image of your entire system (an exact sector-for-sector copy) which can easily be restored. This allows you to run PartitionMagic with the security of knowing that you can get your system back up and running quickly if you run into problems.
2. FILE SYSTEM SUPPORT ———————- In addition to the documented partition type support, PartitionMagic 4.0 also supports FAT16X, FAT32X, and ExtendedX partitions. 3. KNOWN ISSUES ————— A. FAT32 memory requirements —————————- PartitionMagic requires at least 32 MB RAM for moving or resizing large FAT32 partitions. B. Shut down all other apps before running PartitionMagic ——————————————————— In Windows 95 and Windows NT, PartitionMagic should not be invoked while any other applications are running. Make sure you close any running applications before starting PartitionMagic. C. Bad Sector Checking is ON by default ————————————— Be aware that PartitionMagic ships with Bad Sector Checking turned ON by default in Preferences. This ensures that data is not moved or copied to bad disk sectors. However, this causes the Create, Move, and Resize operations to slow down considerably. The quality of modern disks is such that bad sectors are rare. Furthermore, most modern computers can determine when a sector is bad; if this happens, the computer automatically marks the sector as bad (so it will never be used) and then uses an alternate sector. If you feel confident that there are no bad sectors on your system, and you want to improve the performance of PartitionMagic, then turn off Bad Sector Checking (by checking the appropriate boxes in the “Skip bad sector checks” listbox in Preferences).
Another way to verify that there are no bad sectors on your disk is by running the Windows 95 ScanDisk utility and doing a surface scan before launching PartitionMagic. D. Native vs. Boot-Mode execution in Windows 95 and Windows NT ————————————————————– PartitionMagic for Windows 95 and Windows NT are both full Win32 GUI applications that will allow you to manipulate your partitions natively, but with one exception: If you choose to move or resize a partition that cannot be locked (e.g., one that has files open on it), PartitionMagic stores the commands to be executed, reboots your computer, and applies the changes in a “boot mode” text-mode environment. E. Backing up your BOOT.INI file in Windows NT ———————————————- PartitionMagic for Windows NT needs to temporarily replace your BOOT.INI file after performing the disk manipulation operations (it switches them back once it has finished performing the operations and rebooting).
If a failure occurs during the NT reboot phase, your BOOT.INI file may not be restored properly. It is a good idea to back up your BOOT.INI file before running PartitionMagic for Windows NT. F. Volume sets and stripe sets on Windows NT ——————————————– Currently PartitionMagic does not support moving and/or copying of Windows NT volume or stripe sets. G. Creating a second primary partition under Windows NT ——————————————————- The Windows NT and Windows 95 versions of PartitionMagic differ in their behavior in regard to creating primary partitions. Specifically, if the user creates a second primary partition on a physical disk using the Windows 95 (or DOS) versions, PartitionMagic automatically creates the new primary partition as Hidden (since some operating systems have a problem with seeing multiple visible primary partitions on the same disk).
Because Windows NT does not have a problem with multiple visible primary partitions, the Windows NT version of PartitionMagic creates the new second primary partition as Unhidden. However, like the Windows 95 version it will automatically hide other primary partitions when performing a Set Active operation. H. Windows NT default swap file location —————————————- Windows NT might put the swap file on a partition other than the Boot Partition, thus creating a condition where an open file will be on a partition other than the Boot Partition. This will cause you to have open files and force PartitionMagic to execute in boot mode. I. PartitionInfo issues ———————– PartitionInfo is the new GUI version of PARTINFO.EXE (which shipped with PartitionMagic 3.x, and ships with PartitionMagic 4.0).
There are versions of PartitionInfo for Windows 95/98 and Windows NT, but not for DOS. DOS users will need to run PARTINFO.EXE. Also, note that PartitionMagic and PartitionInfo cannot be run simultaneously. J. MOUSE.COM issue running PartitionMagic under Windows 3.x ———————————————————– By default, Windows 3.x disables MOUSE.COM in the AUTOEXEC.BAT file and MOUSE.SYS in the CONFIG.SYS file. This makes Windows 3.x use its own proprietary mouse driver. When PartitionMagic is run from Windows 3.x with this situation, MOUSE.COM is never called, and PartitionMagic runs without a mouse. You can have a mouse with PartitionMagic under Windows 3.x if the MOUSE.COM mouse driver is loaded before Windows 3.x is loaded (this will require you to edit your AUTOEXEC.BAT or CONFIG.SYS file).
K. Uninstalling PartitionMagic under Win3.x ——————————————- The “PowerQuest PartitionMagic 4.0 Pro” program group is not removed when you uninstall PartitionMagic under Win3.x. This can be done manually if desired. L. Mixed IDE/SCSI drive configurations under Windows NT ——————————————————- In a configuration with mixed IDE and SCSI hard drives, Windows NT does not always see the boot drive as the first physical hard drive. PartitionMagic displays drives in the order Windows NT reports them. As a result, you may see your boot device as Drive 1, 2, etc. This does not cause problems for PartitionMagic except when setting a new active partition. Also, PartitionMagic may incorrectly report that there is no active partition on your system. To change your active partition, be sure that you identify which drive is the boot drive.
With this configuration there is the possibility that your BOOT.INI file can be corrupted, so it is a very good idea to back up your BOOT.INI file before running PartitionMagic. M. Checking NTFS Partitions under DOS version of PartitionMagic ————————————————————— On rare occasions, checking an NTFS partition while running the DOS version of PartitionMagic can take an unusually long time. Since the Move, Copy, and Resize operations all perform a check both before and after performing the function, it can impact each of these operations. (Note: the DOS version is executed when the user runs the boot-mode version of PartitionMagic under Windows 95/98, or when running the Zinc or TTY versions.) N. Checking partitions in general ——————————— PartitionMagic 4.0 can only check partitions that it can lock (i.e, that have no open files on them).
This may sometimes cause the Check option to be disabled. O. OS/2 and Linux installation programs for PartitionMagic ———————————————————- The distribution media contains PartitionMagic installation programs for OS/2 and Linux operating systems. These programs create a bootable floppy disk set that runs the DOS GUI version of PartitionMagic 4.0. You can find the OS/2 installation under the OS2INST directory, and the Linux installation under the LINUX directory. P. Drive letter changes under Windows 95 and NT ———————————————– In some situations, operations done under PartitionMagic for Windows 95 will cause drive letter changes made under the Windows NT operating system to be lost. In these cases you will need to set up your drive letter changes again (using either PartitionMagic for Windows NT or Disk Administrator under NT) to restore your original configuration. Q. MagicMover issues ——————– MagicMover has a known issue involving an ‘=’ alone on a line in system files (i.e., WIN.INI, SYSTEM.INI) under Windows 95 and Windows 3.x.
If an error occurs, make sure there are no single ‘=’ characters on a line in these system files. Also, under no circumstances should you use MagicMover to move the BootMagic directory (BTMAGIC.PQ) as this will cause serious damage to your BootMagic setup. R. Windows NT may improperly detect the size of large hard drives —————————————————————– Windows NT 4.0 may incorrectly report the size of hard drives larger than 10GB. Most often it reports them as 8GB drives. This problem may be solved by 1) installing Service Pack 3, and 2) installing the postsp3 patch ata-fixi.exe. This patch can be download from: ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/nt40/hotfixes-postSP3/atapi-fix/ S. Color palette issues installing Windows NT version —————————————————— If you run the Windows NT version of PartitionMagic immediately after installation, occasionally you may see color palette problems. We recommend rebooting Windows NT before running PartitionMagic for the first time. 4. MINIMUM SYSTEM REQUIREMENTS —————————— PartitionMagic for Windows 95 —————————– – 12 MB free hard drive space – 16 MB of RAM (32 MB for FAT32 support).
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard disks (greater than 4 GB).
– Windows 95a or later (Windows 95b required for FAT32 support) – VGA compatible display – Intel/486 DX or later (33 mhz) – 4x CD-ROM drive – 3.5″ Floppy (High density) PartitionMagic for Windows NT —————————– – 12 MB free hard drive space – 16 MB of RAM (32 MB recommended for PartitionMagic to operate on FAT32 partitions).
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard disks (greater than 4 GB).
– Windows NT 4.0 Workstation (NOTE: Windows NT 3.51 is not supported by native versions of PartitionMagic, but is supported by the DOS GUI and Character Mode versions.) – VGA compatible display – Intel/486 DX or later (33 mhz) – 4x CD-ROM drive – 3.5″ Floppy (High density) DOS GUI/Character Mode ———————- – 6 MB free hard drive space – 8 MB of RAM (16 MB for PartitionMagic to operate on NTFS partitions, 32 MB recommended for PartitionMagic to operate on FAT32 partitions).
Also, please note that more memory may be required to manipulate FAT32 partitions on large hard disks (greater than 4 GB).
– MS-DOS 5.0 (6.2 or later recommended) or compatible – VGA compatible display – 486 DX or later (33 mhz) – 4x CD-ROM drive – 3.5″ Floppy (High density) 5. GENERAL USAGE NOTES ———————- – If you run PartitionMagic from DOS: Turn off 3rd party disk caches. Deactivate or unload any TSR programs that access or modify the partitions being changed. Do not run PartitionMagic from a compressed drive. – Running PartitionMagic from Windows 3.1: After using PartitionMagic, it is normal to get an error message when starting Windows 3.1 stating that the swap file is corrupt. Windows 3.1 is designed knowing that disk utilities may move the clusters of the swap file. When a move is detected, the error message is given. To fix the swap file, click on the 386 Enhanced icon in Control Panel, then on the Virtual Memory button. Delete the swap file and create it again. – This release of PartitionMagic handles ASCII filenames. PartitionMagic does not yet handle double byte character sets such as Japanese, resulting in two known limitations: (1) Converting a partition from FAT to HPFS can produce incorrectly translated filenames.
(2) An attempt to specify or set the Volume label may fail. – Progress bars are an estimation only and can pause for several minutes, even though PartitionMagic is still working correctly. If you think your computer has locked up, please be patient and PartitionMagic will finish the operation. 6. SECURITY PROBLEMS USING SHARED DRIVE LETTERS UNDER WINDOWS 95 —————————————————————- Be aware that under Windows 95, if you are using shared privileges to share drives and you add or remove a partition (causing the drive letters to change), you may experience some security problems. The following is a possible example of a security problem sharing drive letters under Windows 95 after partitioning your hard drive. Before you partitioned your hard drive, your CD-ROM drive had shared privileges for drive D:. After you added a partition, your CD-ROM became drive E:. However, because your CD-ROM (drive D:) had shared privileges and you added a partition, your shared privileges would still be assigned to drive D:.
Therefore, you could potentially be sharing information from your D: partition that you do not wish to share. To resolve this problem, you may want to check, and if necessary reset your shared privileges in Windows 95 after you have added or removed a partition. You will not be affected by this situation if you share a directory and its parent directory and its parent drive letter changes, because the shared privilege would be lost. 7. PARTITION MAGICIAN NEWSLETTER ——————————– PowerQuest has a free monthly electronic newsletter that is dedicated to official announcements regarding PartitionMagic. Signing up on the list will give you all the information you need regarding product tips, bugs, and patches. Just go to our home page (www.powerquest.com), enter your email address into the space provided and hit the “Sign me up” button. You will be e-mailed a response verifying your subscription. ============================================================================ PowerQuest can be reached at: Voice: 801-437-8900 Fax: 801-226-8941 Web site: http://www.powerquest.com E-mail: [email protected]