Physics Investigation How does insulation effect the loss of heat In this investigation I am going to try and find out what difference it makes if you wrap newspaper round a beaker with hot water in it and see if the heat loss is different at different thickness layers of newspaper. I carried out a preliminary experiment and found out that by only increasing the layers of thickness by 1 each time, that wont make enough difference to make a good graph because the trends will be too similar. So I chose to increase the layers by five each time. Apparatus. Beaker. Stopwatch.
Newspaper. Polystyrene. Thermometer. Kettle I will also take a number of safety precautions whilst conducting the investigation. I will ensure the kettle is used safely through out the experiment, and hot water is transferred securely…
I will use protection when handling the boiling tubes when the hot water is present. Safety precautions are needed because I am dealing with hot water, which can scald. The following things need to be acknowledged to, in order to keep this experiment safe. I will be careful not to knock over the beaker with the hot water in. I will be careful not to knock over other peoples beakers. Care is needed when pouring hot water.
I will not run with the beaker of hot water. To make this a fair test I will have to do the following. I will keep the volume of water the same. I will wrap the beaker with newspaper in the same way each time because some ways can effect the heat loss more that others. I will place the thermometer in the beaker at the same place each time.
The Essay on Ant Acid Water Beaker Base
TJ Gentile Bio lab 11/18/2003 Mrs. Trunfio Experiment 3: Acids and Bases Hypothesis: My Hypothesis is that Aspirin would be the Best buffer because it has a strong acid content and it May be able to withstand changes better. Materials Needed: -CBL System -TI Graphing Calculator -Venire pH System -Venire DIN adapter Cable -250- mL beaker -Various Biological Organisms -Various Non Biological ...
I will place the beakers on polystyrene when they are being tested because it insulates the heat. I will use the same type of newspaper for each experiment. I will use the same size beaker, which is made out of the same material. The factors I will change are. I will change the layers of newspapers on the beaker. I will get 6 beakers.
I will record two at a time. I will put polystyrene on the top and bottom of the beakers when I have filled the beakers up with 150 ml of boiling water. There is a little hole in the polystyrene on the top of the beaker to stick the thermometer through. I will then take results every five minutes for a total of 30 minutes. There will be 6 readings taken for each newspaper layer range.
I will record 6 different layers. 0 layers, 5 layers, 10 layers, 15 layers, 20 layers and 25 layers. This should give me a good range of results. I predict that the more layers of newspaper round the beaker, the less quickly the water will lose heat. I say this because the more layers there are, the more air pockets. If there are more air pockets the more hot air is trapped in the newspaper.
This air acts as an insulator. I also predict that more heat will be lost at the start of the experiment because the water is hotter, so there is more of a heat difference between the inside and outside. Therefore, more heat is conducted out the beaker because of the cooler temperature outside the beaker. But as the temperatures even out the heat loss gets less, because less heat is being conducted away from the beaker. So you should see a graph looking like this. Results (Temp in C) Minutes 0 layers 5 layers 10 layers 15 layers 20 layers 25 layers 1 77 78 76 78 76 77 2 76 76 75 77 75 76 3 74 75 74 76 74 75 4 73 74 73 75 73 75 5 72 73 72 74 73 74 6 70 72 71 74 72 73 7 69 71 70 73 71 72 8 68 70 70 72 70 71 9 67 69 69 71 69 71 10 66 68 68 70 68 70 11 65 66 67 69 68 69 12 64 66 66 69 67 68 13 63 65 65 68 66 67 14 63 64 65 67 65 67 15 62 63 64 66 64 66 16 61 62 63 65 64 65 17 60 61 62 64 63 64 18 59 61 61 63 63 63 19 59 60 60 62 62 62 20 58 59 59 61 62 62 21 57 59 58 60 61 62 22 56 58 57 60 60 61 23 55 57 57 59 59 60 24 55 56 56 58 58 59 25 54 55 55 57 58 58 Analysing evidence and conclusion Mt results went down in a good trend.
The Term Paper on Heat Pump
Outdoor components of a residential air-source heat pump A heat pump is a machine or device that transfers thermal energy from one location, called the “source,” which is at a lower temperature, to another location called the “sink” or “heat sink”, which is at a higher temperature. Thus, heat pumps moves thermal energy opposite to the direction that it normally ...
All apart from the 25 layers which cooler quicker than the 20 layers. All the results are clear that they gradually decrease in the graph, In a fairly straight line. The more they are insulated, the slower the temperature falls. It is because the newspaper traps air in between it and the beaker, this insulates the beaker and traps hot air from escaping. Evaluation My results were good. I conclude that the more layers around the beaker, the slower the temperature falls.
I could have measured stuff more accurately, but I didnt have time.
