The purpose of the experiment was to separate an initial heterogeneous mixture composed of 5.00 grams of salt, 2.00 grams of sand, 50.0 mL of water, 15.00 grams of pebbles, and 1.00 gram of iron filings, and leave as much salt as possible remaining. Using separation techniques including magnetizing, evaporation, filtration, etc. the heterogeneous mixture was thoroughly separated into 4.88 grams of salt. There have been some errors regarding the isolation techniques and processes, however, the mass of salt at the end is substantial enough to conclude that results obtained are sufficient compared to the initial mass Introduction and Background
The point of this experiment was to separate the different components present in a heterogeneous mixture. In doing so, four goals/checkpoints were expected to be met including learning how to use the lab materials, applying knowledge of different separation techniques, applying the scientific method to a problem, and applying the knowledge of lab safety rules and regulations. The expectations were to take the heterogeneous mixture of sand, salt, pebbles, iron filings, and water and use separation techniques to isolate the salt and iron filings (the water wasn’t needed at the end, and the pebbles and the sand were not separated from each other under the teacher’s express permission).
Methods of isolation utilized include magnetism, filtration, and evaporation. Magnetism: a useful isolation technique in this experiment, a magnet was used to separate the iron filings from the initial heterogeneous solution Filtration: the isolation technique which is accomplished by filter paper and a funnel.
The Essay on Separation Of A Mixture Of Sand And Salt
Goal(s): To separate a mixture of sand and salt and to find the percent of each component by mass of each mixture Background Theory: A mixture is a combination of two or more pure substances in which each pure substance retains its individual chemical properties. Mixtures can be separated by physical processes such as filtration and evaporation. Filtration is a process where solids and liquids can ...
The filter paper is folded twice ramen noodle style and inserted into the funnel. From there, the heterogeneous mixture may poured into the filter to isolate the sand and pebbles from the mixture Evaporation: the isolation technique which is accomplished by a hotplate or a surface. The salt water in the beaker or whatever source Safety Rules: This lab requires the use of goggles because there is potential of accidental debris (e.g. sand, salt, iron filings, pebbles) entering the eyes. Furthermore, the people performing this lab must take caution when handling the hot plates because it is a tremendous source of heat that has the capability of afflicting severe burns when touched. For this lab, the temperature for the hot plates goes up to 372 degrees Fahrenheit. Materials
Lab Equipment Used:
1 100 mL beaker
1 triple beam balance
3 weighing boats
1 magnet
1 stirring rod
1 ring stand
1 scoopula
1 filter paper
1 funnel
1 hotplate
Materials in Heterogeneous Mixture:
1.97 grams of sand
1.02 grams of iron filings
14.67 grams of pebbles
50.00 mL of water
5.00 grams of salt were used
Experimental Procedure
Part One: Creation of the Heterogeneous Mixture
The components required for the mixture were measured out. In terms of the measurements, 1.97 grams of sand, 1.02 grams of iron filings, 14.67 grams of pebbles, 50.00 mL of water, and 5.00 grams of salt were measured out. A triple beam balance, weighing boats, and a scoopula were used for this portion of measurement, the balance and the weighing boat for measuring purposes, and the scoopula for accurate measurements. A 100 mL beaker was used to hold the mixture. First, the pebbles were inserted. Then, the sand, then the iron filings, salt, and water. Using a stirring rod, the
heterogeneous mixture was thoroughly blended together. Part Two: Application of Isolation Techniques
The first component isolated was the iron filings using the magnet. One side of the magnet was stuck into the heterogeneous mixture, and all the iron filings on that side were taken off. Promptly afterwards, the other side was stuck in and effectively removed any iron filing that may not have been collected in the first pass. Afterwards, the salt water was separated by using filter paper and a funnel. A ring stand was set up and on the ring, the funnel was placed. The filter paper was folded twice in half and was inserted into the funnel, making a coffee style filter. The heterogeneous mixture was poured into the filter and the salt water was poured in droplets into an Erlenmeyer flask. This succeeded in isolating the pebbles and sand from the salt water. The pebbles and sand were discarded, and the salt water was left. The last remaining step was to isolate the salt from the water. Applying the evaporation technique required the use of a hotplate in which the Erlenmeyer flask with salt water was placed on top. The temperature on the hotplate was set at 372 degrees Fahrenheit Results
The Essay on Effects Of Salt On Freezing Point Of Water
Blank 1 Blank ity BlankBlankity Blank Mr. Blank 4/9/02 Effects of Salts on the Freezing Point of Water In this experiment, you will study the effect that several solutes have on the Freezing Point of water. When a solute is dissolved in a liquid, the temperature at which that liquid freezes decreases, because the molecules of the solute become attached to the water molecules, making it more ...
The end
Weights of the mixture components include 1.97 grams of sand, 1.02 grams of iron filings, 14.67 grams of kernels/pebbles, and 50 grams of water. Important Results
This includes the result of the evaporation techniques performed including the end in which the salt came out looking like a powdered substance. Initial weight measure for components
Discussion and Conclusion
The objective of isolating the heterogeneous mixture and end up with as much salt as possible was sufficiently met. The use of lab equipment, application of separation techniques, and the safety rules and regulations were learned. The overall experiment was successful to a certain degree in which all components of the objectives were learned. However, the initial salt concentration differs from the final salt concentration in that there is a .12 gram difference between them. Expected results were at the least of 4.95 grams at the end. The group was precise in terms of measurements and carrying out the isolation techniques, however, there may have been error in the processes themselves.
The Essay on Ship Island Sand One Beach
Before we began the initial beach walk, our instructor related some valuable facts about Ship Island. In 1969, Camille, a level five hurricane, swept through the island breaking it in two. This occurrence split the island in exactly the right spot, making the East Island lush with trees and shrubs, and Ship Island a place for students like us to enjoy a day at the beach. During the beach walk, the ...
First, there was the issue of the iron filings. There were some residuals of iron filings present in the salt at the end, and that was due to the lack of care in collecting all the iron components. This could be fixed by using the magnets after every step of the way, collecting the bits of iron left after each step. Furthermore, there was also some sand grains present within the salt at the end of the lab. That is an obvious flaw within the filtration techniques of the pebbles and sand from the overall heterogeneous solution. That can easily be fixed by careful moderation of the sand grains. If the mixture was poured too rapidly or in great amounts, the sand could have potentially got in between the layers filter paper and the funnel itself. Overall, as seen in the comparison between the initial mass of salt and the end, there was only a .12 gram deviation resulting from careless/improper moderation of isolation techniques, but they could be easily fixed with a careful eye and additional steps to ensure complete isolation of components.
