The history of submarines shows there were two significant advances in the performance of submarines, which occurred after full scientific studies were undertaken. The first was by the Germans at the end of World War II when they produced the Type 21, which could have upset the balance in the U-Boat campaign if it had arrived earlier.
The second was by the US Navy with Albacore which had a submerged speed of over 30 knots. To neglect full scientific studies would be a serious mistake in the design of any future replacement submarine. Design is shown to be like a jigsaw puzzle where altering one piece requires alterations in all surrounding features to make a workable complete design. The basis of improved hydrodynamic features is discussed. A new nose shape is presented which should improve the performance of the forward passive sonar up to operational speeds.
Other major sources of resistance may be improved. It is proposed a first major step should be to establish the detailed performance of Collins using wind tunnels and computational fluid dynamics which will serve as the comparative foundation for any new design. RELEASE LIMITATION Approved for public release Published by DSTO Platforms Sciences Laboratory 506 Lorimer St Fishermans Bend, Victoria 3207 Australia Telephone: (03) 9626 7000 Fax: (03) 9626 7999 © Commonwealth of Australia 2004 AR-013-204 October 2004 APPROVED FOR PUBLIC RELEASE
Some Aspects of Submarine Design Part 1. Hydrodynamics Executive Summary The history of submarines subsequent to the first truly operational vessel, Holland, launched in 1899, showed two significant advances as opposed to steady incremental developments. These resulted from full scientific studies of all the problems. The first of these advances was made by the Germans at the end of World War II, when they produced the Type 21 which had major improvements in range and battery time while their underwater speed increased to 18 knots compared to 5 knots on previous vessels.
The Business plan on Evaluate And Improve Own Performance In A Business Environment 2
1.1 Explain the purpose and benefits of continuously improving own performance in a business environment. This improves the quality of my work which in turn proves that I am capable of further responsibility. More experience and responsibility could be useful in gaining future job roles. 1.2 Explain the purpose and value of encouraging and accepting feedback from others. The purpose of feedback is ...
Design diving depth was increased dramatically. They could operate below the Allies submarine defence weapon systems. The second advance was made by US designers who produced Albacore in 1953 with a shape suited to full underwater operation. Its length-tobeam ratio was only 7. 7 and top underwater speed was 33 knots. The drag coefficient was only 0. 1 compared to 0. 35 on previous submersible designs. It is clear that scientific studies should be a starting point for any future submarine design.
A review of the literature covers priorities in design and shows how enhancement of one feature interacts with other features and may even result in an overall loss of performance despite the perceived advantage of the enhanced feature. Hydrodynamic aspects are then discussed starting with the shape and reasons why a length-to-beam ratio of about 7. 5 gives the minimum resistance. All features affecting the resistance are discussed including the boundary layer, laminar flow, transition, turbulence and separation and how the flow over the principle passive sonar should be as quiet and smooth as possible.
Added resistance from sails, masts, snorkels and appendages need careful streamlining and attention in design. A proposed profile of a new submarine is presented which has the passive sonar far forward in the streamlined nose with the torpedo tubes positioned further aft. It should be a quieter vessel with more effective sonars. The profile requires shortening to reduce the displacement and then the internals need rearranging. The design process then begins, which is iterative. In order to proceed with such concepts it is vital to have a database.
The Review on An Archery Test Rig Made Using Computer Aided Design
To achieve the project objective, the test rig structure must be design and suitable for place the archery testing apparatus. We need to develop tools that can test the efficiency in archery equipment. The arrows were made of pine and consisted of a main shaft and about 15–20 centimeter (6–8 inches) long fore shaft with a flint point. This led the commercial development of new forms of bow ...
Our current submarine, the Collins class, should be the base from which all changes and proposals are measured. It is suggested detailed wind tunnel studies should be undertaken concurrently with computational fluid dynamic (CFD) evaluations. The results should then be compared with full scale trials to establish propeller efficiencies and roughness factors as well as the contributions for each feature, hull, sail, control fins, masts and snorkels, flood openings and others. This database will allow more precise comparisons for any improvements which may be considered in a future design. Author Prof.
Peter Joubert (OAM) Contractor Maritime Platforms Division P. N Joubert, a World War II fighter pilot, after demobilisation from the RAAF, studied aeronautical engineering at Sydney University. He then joined CSIRO, where he designed a radio controlled meteorological glider. Subsequently he was appointed as a lecturer in mechanical engineering at Melbourne University specialising in fluid mechanics. In 1954 he attended the MIT where he built and tested high-speed catamarans in the towing tank. At Melbourne University he built a new wind tunnel and much research was initiated and conducted there.
He has authored over 120 scientific papers, most of them in fluid mechanics, boundary layers, roughness, and vortices and recently with a PhD student, the flow about a submarine body in a turn. Over the years he has received many research grants including one from the US Navy. His work with his students and colleagues is recognised internationally such as by the General Motors Research Laboratories and other international ship research bodies. He has been studying flow patterns on submersibles since 1998 and has helped with certain modifications to Collins.
In 1972 he was granted a personal chair and since retirement has been invited to continue as a Professorial Fellow. He was awarded a medal in the Order of Australia in 1996 for contributions to road and yacht safety. He was awarded the AGM Michell medal in 2001 by the College of Mechanical Engineers and is a Fellow of the Australian Academy of Technological Science and Engineering. As a yacht designer he has had over 100 yachts built to his designs, including a high-speed catamaran for the world sailing speed record and ocean racing yachts.
The Term Paper on The study of design research methodology
Abstract Studies on design research methodology are infrequent, although there is a consensus that more e ort is needed for improving design research quality. Previous calls for exercising better research methodology have been unsuccessful. As numerous studies reveal, there is no single scienti c methodology that is exercised in science or in any other research practice. Rather, research ...
Some of these have won against world-class competition – the Sydney-to-Hobart race in 1983 and second places in 1968, 2002 and 2003. As a sailor he has raced his own designs in 27 Sydney-toHobart races and survived the storm of 1998. In 1993 he was awarded the Commodore’s medal of the Cruising Yacht Club of Australia for outstanding seamanship after his crew had rescued eight survivors from a sunken yacht at night in a strong gale.
