A crash course in TCP/I PAt first glance, TCP/IP (Transmission Control Protocol/Internet Protocol) may seem baffling. Many other protocols, such as NetBEUI and IPX/SPX, require no configuration. TCP/IP is different. Due to the seemingly endless number of options that you can configure within TCP/IP, many people become intimidated at first.
In reality, however, TCP/IP isn’t very difficult, but you have to gain some understanding of what you ” re configuring. So, I’m going to give you a crash course in TCP/IP. Although I won’t be able to explore every feature in detail, I’ll cover the important points. The IP address The most basic element of TCP/IP is the IP address.
The IP address is a number that’s unique to each computer. If you know a computer’s IP address, you can communicate with that computer from anywhere in the world. Since TCP/IP is the protocol that the Internet uses and since Internet servers are located all over the world, TCP/IP must be rout able. Thus, when you try to access an IP address, your computer must be able to tell whether or not that IP address is located on your local network. If the desired address is located on your local network, you won’t have a problem reaching it. If it isn’t on your local network, TCP/IP must know which network the IP address is located on in order to reach the address.
The network number represents the network that contains a given IP address. If you look through the various tabs of the TCP/IP properties sheet, you ” ll see that there’s no field that allows you to specify the network number. Instead, the network number is part of the IP address. An IP address is composed of a network number and a computer number.
The Term Paper on Computer Networks And Internet Protocol Television
The advent of computer has changed the way the world moves. Distance factor is no longer a problem. The physical might appear a big place with things at far off places but the world in virtual form doesn’t believe in distance. Everything can be achieved within minutes if not seconds. The whole technology behind this mega change is based on computer and is termed as Information Technology. This ...
Your computer can distinguish those two numbers because of something called the sub net mask. The sub net mask is located in a field directly below the IP address on the TCP/IP properties sheet. A simple sub net mask would be something like 255. 255. 0. 0.
The numbers that make up the sub net mask indicate which portion of the IP address is the network number and which portion is the computer number. The four numbers of the sub net mask correspond directly to the four numbers in the IP address. For example, if you had a computer with an IP address of 147. 100. 100.
25 and a sub net mask of 255. 255. 0. 0, the first two numbers in the sub net mask (both are 255) indicate that the first two numbers of the IP address are the network number. The second two numbers (both are 0) indicate that the second two numbers of the IP address are the computer number. Therefore, in the IP address 147.
100. 100. 25, the 147. 100 portion denotes which network the computer is located on, and the 100.
25 portion represents a particular computer on that network. Of course, sub net masks become much more complex than this example. For instance, you can subdivide an individual network. The default gateway Now that you know how TCP/IP determines whether a destination address is located on a local network or on a foreign network, you may wonder how it attaches to a foreign network, especially if that network is halfway around the world. Well, it completes this job by using routing tables. Routing tables, which are stored in your routers, tell the router where to connect in certain situations.
You should note that one of the TCP/IP configuration options is for a default gateway. The default gateway is the address where a TCP/IP packet is sent if TCP/IP can’t locate the destination IP address on the local network. Usually, the default gateway points to the router that controls your building’s link to the outside world (often through an Internet connection).
The Essay on Legislation passed to address computer crimes
Over the past month you could not pick up a newspaper without finding an article about the recent Denial of Service (DOS) attacks on E-commerce sites over the Internet. This increase in Internet security problems and crimes, is paving the way for tougher legislation in regards to monitoring and tracking computer hackers. We the people should ask ourselves how far we should allow the federal ...
Since this router has a table of other routers, it knows the address and location of these routers.
The destination IP address helps the router determine to which router to pass the packet. Typically, a TCP/IP packet is passed through several routers before it arrives on the destination network and, finally, on the destination PC. DHCP If all of this information is making your head spin, there’s one TCP/IP feature that will make your life easier: Dynamic Host Configuration Protocol (DHCP).
DHCP allows you to set one or more servers on your network to act as a DHCP server. When a client computer that’s set to use the DHCP option comes online, the DHCP server automatically configures TCP/IP on this computer. Of course, you still have to configure the DHCP server, but using DHCP saves you from all of the effort of configuring each client manually.
It also keeps you from accidentally using a particular IP address more than once. DHCP is also useful if you have a limited number of IP addresses to work with; only the computers that are turned on at a given moment will use IP addresses. Wilson Windows-based networks, each computer has a name. The WINS option can be configured to contain the IP address of a Windows NT Server that’s running a WINS service.
The WINS service resolves computer names (NetBIOS names) to IP addresses. Thus, if you try to access a computer by its name, your computer will go directly to the WINS database and search for the name and IP address. It won’t have to query every computer on the network to determine the right IP address. As you can imagine, using WINS really cuts down on network traffic.
DNS DNS functions similarly to WINS, except that it manages domain names rather than computer names. A domain name is the type of name that you use on the Internet. For example, Microsoft. com is a domain name. When you point your browser to web your computer will query a DNS server for the IP address that corresponds to the domain name. If the DNS server doesn’t know the address, it asks another DNS server.
The Term Paper on Sygate Server Computer Network
... DHCP server" if you " re using SyGate's built in DHCP server. If you configure "manually", set the router and name server address entries to be the SyGate server computer ... enter the IP address of the SyGate server computer into the Gateway and DNS entries within the ... DNS server fails If the first DNS server listed in the TCP/IP properties on the SyGate server computer fails, your networked computers ...
This process continues until a DNS server somewhere along the line knows the address. Then, that server informs your computer-and all of the other DNS servers that are involved-of the domain name’s IP address. Conclusion TCP/IP is more intimidating than other protocols because there are so many different options to configure. I’ve provided you with a brief explanation of how TCP/IP works. Now, you should have a better understanding of those options. Close Window.
