The long awaited project phenomenon that is due to make art history, The Gates, by Christo and Jeanne-Claude. Given permission by Mayor Michael R. Bloomberg on January 22, 2003, the project is set to be mounted in Central Park in New York City February 12 th of this year. The planned project is to resemble a golden river. Thus consisted to 7500 gates in total standing 16 feet (4. 87 meters) high with a width changing from 5′ 6′ to 18 feet (1, 67 m to 5, 48 meters) going along the edges of the Central Park pathways.
Saffron colored fabric panels suspended from the horizontal top part of the gates will come down to approximately 7 feet (2, 13 meters) above the ground. Each gate will be spaced at 12 foot (3, 65 meter) from each other, but might vary where trees expand above the walkways allowing the synthetic woven panels to wave towards the next gate and be seen from far away through the leafless branches of the trees. The construction itself is a big development in itself. There are to be hundreds of residents to help in the project for temporary employment doing the following things: Manufacturing and assembling of the gates structures, Installation workers, Maintenance teams around the clock, in uniform and with radios, Removal workers. The work is consisted of a lot of materials that, in the end, will be recycled at an assembly plant in Queens, NY.
The materials are as follows: o 5, 290 US Tons of steel (4, 799 Metric Tons) (10, 580, 000 pounds) (equal to 2/3 the steel in the Eiffel Tower) for 15, 000 specially designed steel footing weights, varying between 615 and 837 pounds each, according to the width of the gate, (279 – 379 Kgo 315, 491 linear feet (60 miles) (96. 5 Km. ) of Vinyl tube, 5 inch x 5 inch square, (12, 7 x 12, 7 cm. ) extruded in saffron color, recyclable, specially designed, (for each gate: 2 vertical 16 feet long (4, 87 meter), and one horizontal (varying between 6 and 18 feet, because the width of the walkways varies) o 15, 000 specially designed, recyclable, cast aluminum upper corner reinforcements which hold together the 2 vertical poles to the horizontal pole. o 15, 000 base anchor sleeves.
The Review on Final Year Project Report
My deepest appreciation also goes out to Mrs. Sharatul Izah Bt. Samsudin who gave me many needed support, encouragement and help throughout my project’s improvement in PSM I, and my friends who struggling with me exploring this scope. Not to forget, thanks to my family and fellow friends who encouraged me. Finally, thank you to all those involved directly and indirectly helping me out during my ...
Which will be bolted to the steel footing weights. o 15, 000 (1/2 inch x 8 inch x 8 inch) (1. 27 x 22, 8 x 22, 8 cm. ) steel leveling plates. The leveling plate is between the base anchor sleeve and the steel base, it has a pivoting bolt which will ensure the perfect verticality of the poles, even when the walkways are inclined. o 165, 000 bolts and self locking nuts.
(7, 500 x 22) o 15, 000 (8 x 8 x 8 inch) (22, 8 x 22, 8 x 22, 8 cm. ) Vinyl leveling plate covers, to hide the bolts. o 116, 389 miles (187, 311 Km. ) of nylon thread to be extruded in saffron color and specially woven into 1, 067, 330 square feet (99, 155 square meters) of recyclable, rip-stop fabric, and then shipped to the sewing factory to be cut and sewn into 7, 500 fabric panels of various widths.
46 miles (74 Km. ) of hems. Due to the many temporary works that Christo has done, The Gates, will be an extended display for 16 days (weather permitting) as opposed to 14 days. The reason being that NYC is their home..
