How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
The Term Paper on Super Mario Video Card
ZSNES by zsKnight, Demo, and Pharos web ZSNES is a Super Nintendo Entertainment System emulator written mostly in assembler. We would really like to thank the snes 9 x team for all their help and also for an excellent snes emulator. We also wish them the very best of luck! Table of Contents 1. ) What's New 2. ) Disclaimer 3. ) System Requirements 4.) Things you should know about ZSNES (Updated v ...
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
The Term Paper on Evolution Of The Pc Operating System part 1
Evolution of the PC Operating System Outline: 1. Abstract 2. Introduction 3. Some facts about the history of computer and operating systems: software evolution depending on hardware development: 3.1 Batch operating systems; 3.2 time-shared operating systems; 3.3 Personal computers of the middle 70s: CP/M (Control Program/Microcomputer). and DOS operating systems; 3.4 Developing personal computers ...
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
The Term Paper on Operating System Integration
There is no universal definition of what is an operating system. An “operating system (OS) is a set of basic programming instructions to computer hardware, forming a layer of programming code in which most other functions of the computer are built” (Palmer and Walters, 2). Another definition of operating system “is a program that acts as an intermediary between a user of a computer and the ...
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
The Essay on Complete Computer System
The new Power Mac G4 is up to twice as fast as the fastest Pentium III-based PCs. With its Pentium-crushing speed and new design, the Power Mac G4 picks up where the old Macintosh (G3) left off. Its enclosure is now highly polished silver and graphite, yet it still offers easy access to every internal component through its swing-open side door. With PowerPC G4 with Velocity Engine, the computer ...
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
The Term Paper on Hard Drives Drive System Bios
Hard Drives In this day and age of faster computers and high-speed processors, it should only stand to reason that hard drives meet the same requirements as the rest of the computer technology world. A technological look and some tips on maintaining or troubleshooting hard drives is included below. By keeping up with the standard of needs of the industry we can be assured that our personal ...
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
The Essay on Management For Information Systems
MANAGEMENT FOR INFORMATION SYSTEMS Today there are a lot of current trends and challenges in information management. The digital world is the linking of people, decisions, tasks and processes via computers and computers with other computers. Cyberspace represents the real time transmitting and sharing of text, voice, graphics, video and the like over a variety of computer-based networks. ...
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. How to install another video card (includes disabling the on-board This solution is broken into three sections: II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE) Please read the information below carefully. 1. It is your responsibility to install and setup the new video card. 2. If the operating system does not have the appropriate video drivers for your new video card you will have to contact the maker of the video card for operating system compatible drivers. II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)
BEFORE installing the video card, check your BIOS version and upgrade to the latest BIOS version if applicable.
1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit
2. Under DMI Compliant Component, click Intel PC System Description. 4. Check next to version for the BIOS version. The BIOS version will look like 1.00.XX.DD04. The XX is the version number. Hence, if the version is listed as 1.00.04.DD04, then the BIOS is version 04.
NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version http://www.ita.sel.sony.com/support/pc/ 7. Read and accept the License Agreement. 8. Click the link for PCV 70, PCV 90. 9. Scroll through the entries for BIOS Updates. Download the BIOS update if it is newer than the one currently installed on your system.
10. Follow the instructions in the accompanying text file to download Follow the instructions below to disable the on-board video. Steps are available for both Windows 95 and Windows 98.
1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
7. Click to remove the checkmark from Original Configuration (Current).
9. Click NO to NOT restart the system. 10. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. let the system boot back up.
11. Click Start, and click Shutdown. 12. Select Shutdown and click Yes. 13. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed. The following instructions should be used to disable the ATI graphics chip set models PCV 70 90 with Windows 98. 1. Click Start, point to Settings, and click Control Panel. 4. Double-click the Display Adapters entry. 5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).
8. Click the Factory Defaults button. 9. At Factory Defaults window, click OK. 10. At the Factory Defaults have been restored to defaults message, 11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK. 12. At the System Settings Change prompt, click NO to NOT restart. 13. Follow the subprocedure below to change the video display to A. Click Start, point to Settings, and click Control Panel. D. Click the Change Display Type button. E. Next to Adapter type, click the Change button. F. Click to select Show All Devices. G. At the top left, click to highlight Standard Display Types. H. At the top right, click to highlight Standard Display Adapter (VGA).
I. At the Select Device box, click the OK button. J. At the Change Display type box, click the Close button. K. At the Display Properties box, click Close. L. Click Yes to restart the system. Let the system boot back up.
14. Click Start and click Shutdown. 15. Select Shutdown and click Yes. 16. Once the system is shutdown, unplug it. The new video graphics card may now be physically installed.
