The purpose of this lab was to find the molar ratio of NaClO and an unknown substance labeled solution “B”. Using the method of continuous variation the ratio of the two solutions were changed but kept equal to 50 mL. The reaction was an exothermic oxidation-reduction and the temperature change was measured to determine which ratio of NaClO to solution “B” was optimal. The ratio with the highest temperature change was 40mL of NaClO to 10 mL of solution “B”. Once simplified, this means the ratio is 4:1.
Now that the mole ratio was determined it can be used in stoichiometry conversions. Introduction: In order to determine the mole ratio of the two reactants, NaClO and Solution B, the method of continuous variations was used. Method of continuous variations involves changing the ratios of the two reactants to find the optimal ratio at which the temperature is found to be the highest. The change of temperature was measured since the heat is directly proportional to the amount of reaction and all the reactions are exothermic.
The Essay on Investigating the changing effects of temperature on the activity of enzymes
Renin is an enzyme that catalyses the coagulation of milk. It is found in the stomach of many animals and is used in making cheeses and junkets. It is found in the gastric juices or gastric mucosa of many mammals, including humans. In the human stomach, particularly those of infants, rennin works to curdle milk so that pepsin, another stomach enzyme, can further breakdown the proteins into ...
Each measurement had a different mole ratio of reactants and the total volume of the solutions was kept constant for all of the trials. Stoichiometry is the mole ratio for the reactants in the balanced chemical equation and also forms the most product. The optimal ratio is the stoichiometric ratio and creates the most heat and has maximum temperature change since it consumes the greatest amount of reactants. All the reactions were oxidation-reduction reactions with sodium hypochlorite as the oxidizing agent.
Once the maximum temperature of the final solutions with three measurements on each side of the greatest temperature difference was found, the data was plotted onto a graph and the intersection of the lines of best fit showed the stoichiometric mole ratio of the reactants. Procedures: Firstly, 175 mL of NaClO and the unknown solution “B” were measured, placed into separate beakers, and made sure they both had the same temperature. Then, in order to find a trend using the method of continuous variations, different ratios of NaClO and solution “B” that added up 50 mL were combined
in a Styrofoam cup. The two substances were mixed with a thermometer to measure and calculate the change in temperature. The cup was then rinsed out and dried for another trial. The process of mixing different ratios of NaClO and the unknown solution was repeated until there were three data points on both sides of the highest temperature taken. Data & Calculations Data & Calculations (Continued): Change in Temperature From 5mL NaClO: 45mL Solution B Ratio Max. Temp. Solution Mixture28. 0 oC – Initial Temp. – 24. 1 oC Change in Temperature 3.
9 oC Analysis & Conclusions: Using the method of continuous variations the mole ratio between NaClO and solution “B” was found to be 4:1. This conclusion was made because the highest recorded temperature, which was 48. 5 °C, came from trial 6, which was a ratio of 40 mL of NaClO to 10 mL of solution “B”. This means 4:1 is the optimum ratio. There were no problems or errors during the lab that were noticed or that affected the data. Further tests would include more trials to see if the ratio determined was correct. References:
The Term Paper on Boiling Tube Reaction Temperature Solution
PLANNING Investigating the Kinetics of the reaction between Iodide ions and Peroxodisulphate (VI) ions By the use of an Iodine clock reaction I hope to obtain the length of time taken for Iodine ions (in potassium iodide) to react fully with Peroxodisulphate ions (in potassium Peroxodisulphate). I will do three sets of experiments changing first the concentration of iodide ions, then the ...
