host, granting access rights to anyone using the guest computer, carry out the following procedure. NOTE: The following procedure is just one of many that could be used to share files in a folder on the host computer. For example, there is user-level access control as well as share-level access control. The following procedure is one of the simplest access control procedures, which is all that is needed to get started using DCC. To get information about all the ways files, folders, and printers can be shared, use the Windows 95 Help. 1.
Double-click the My Computer icon. 2. Double-click the icon for the drive that contains the folder you want to share (for example, double-click the icon for the C drive).
3.
Right-click the icon for the folder you want to share, and then click Properties. 4. Click the Sharing tab, and then click Shared As. 5. Enter a share name, enter a comment, and then add user access rights (Full or Read-Only).
The folder icon now changes to a folder held in a hand, indicating that this folder is now a shared resource.
Making Sure DCC Is Installed on Both Computers: DCC is not installed with the typical Windows 95 installation recommended for most computers. Check whether DCC is installed on both of the two computers that will be using the IR link. To do this, click the Start button, point to Programs, and then point to Accessories. Direct Cable Connection appears on this menu if it is installed. If DCC is installed on both the host computer and the guest computer, then skip the next step. An Optional Step: Installing DCC: Before establishing a DCC connection, DCC must be installed on both the host computer and the guest computer.
The Term Paper on Managing A Personal Computer
1.1 The AUTOEXEC.BAT file is one of files which loads every time the computer is booted. It contains command lines and procedures to run programs and load settings for the system’s hardware and software configuration. It also may contain command lines procedures to run programs which may clean your system’s hard drive of temporary files and viruses. An example of this file is shown below: @ECHO ...
Carry out the following procedure on each computer that does no have DCC already installed. 1. Click the Start button, point to Settings, and then click Control Panel. 2.
Double-click the Add/Remove Programs icon, and then click the Windows Setup tab. 3. Click Communications, and then click the Details button. 4. Make sure that the Direct Cable Connection check box is selected, and then click OK.
Establishing and Using the DCC IR Link Between Host and Guest: To run DCC over an IR link, carry out the following procedure: 1. Make sure the IR communications driver is properly installed and the IR devices are enabled by carrying out the procedures in “Step 1. Installing the IR Communications Driver” and “Step 2. Validating the IR Communications Driver Installation” earlier in this document. NOTE: To increase the likelihood of success with DCC over an IR link, use the Limit Connection Speed To option on the Infrared Monitor Options tab to limit the IR connection speed to 9600 bps for the first test of DCC over the IR link (and then increase the speed later).
2.
On the host computer, click the Start button, point to Accessories, and then click Direct Cable Connection. 3. Follow the steps in the Direct Cable Connection Wizard to set up the host computer. When the wizard prompts you for it, select the Host option.
When the wizard prompts you to choose a port, use the same virtual port used in the procedure “Step 2. Validating the IR Communications Driver Installation” earlier in this document. The wizard also offers password protection. It is not necessary to establish password protection on the host computer for this test of the IR link. When you have finished the wizard, click the Finish button. DCC starts running on the IR link and displays the following message: “Status: Waiting to connect via Serial cable on Comx,” where Comx is the name of the virtual port the IR link is using.
The Homework on Communication In The Millenium 2000 And Beyond
Communication In the Millenium: 2000 and Beyond The Year 2000. The Millenium. With these phrases come the thoughts of the future and futuristic living. Although the lifestyle of the Jetson s, with moon shot apartment complexes and flying cars, is more science fiction and entertainment than science fact, how many of their fantasy inventions might someday be a fact? With the new century less than 3 ...
4. Repeat steps 2 and 3 for the guest computer, except select the Guest option instead of the Host option. When you have finished the wizard, click the Finish button. The DCC connection is automatically made over the IR link, and all the shared folders on the host computer are displayed on the guest computer’s screen. If you are working on the guest computer, and you want to copy a shared folder from the host computer to the guest computer, select the folder’s icon in the window that displays all the shared folders that are on the host computer, and drag the icon to the desktop.
To work on a shared folder on the host computer without copying it to the guest computer, double-click the folder in the display on the guest computer. Note that if the host computer is connected to a network, the guest computer can reach shared resources on the network through the DCC connection to the host. IR COMMUNICATIONS DRIVER COMPONENTS The following files make up the IR communications driver: Filename Description — – — — ACT 200 L. VXD Support for the ACTiSYS ACT-IR 200 L IR adapter ACT 220 L. VXD Support for the ACTiSYS ACT-IR 220 L IR adapter ADAPTEC.
VXD Support for Adaptec IR adapter CRYSTAL. VXD Support for AMP Phaser Serial Adapter ESI. VXD Support for Extended Systems Jet Eye PC Infrared Interface (ESI 9680) INFRARED. CPL Infrared device in the Windows 95 Control Panel INFRARED. DLL Infrared device class installer INFRARED. INF IR device information file for Windows 95 Setup INFRARED.
HLP On-line help topics for Infrared Monitor IR COMM. VXD Top layer of IR communications for Windows 95 IRDALAN. INF IrLan device information file for Windows 95 Setup IRDALAN. SYS IrLan driver IR ENUM. VXD Enumerator for the “IR bus” IR LAMP. VXD IrDA protocol, middle layer of IR communications for Windows 95 IRLAPFRM.
VXD Generic infrared framer, lower layer of IR communications for Windows 95 IRM ON. EXE Infrared Monitor IRMONHLP. EXE IR Monitor on-line help utility IR BEGIN. WAV Sound for Infrared Monitor user interface I REND. WAV Sound for Infrared Monitor user interface IR INTER. WAV Sound for Infrared Monitor user interface M SPORTS.
INF IR port information file for Windows 95 Setup PARALLAX. VXD Support for Parallax IR Adapter, Lite Link PRA 9500 A WIR. CNT Table of contents for Infrared Monitor on-line help The documentation files supplied with the IR device driver are: Filename Description — – — — Infrared. txt This document. IR ADAPTER MANUFACTURER NAMES AND ADDRESSES The following manufacturers supply IR adapters that have been tested successfully with the Windows 95 IR Communications driver: ActiSys, Inc. 1507 Fulton Place Fremont CA 94539 Tel: (510) 490-8024 Fax: (510) 623-7268 E-mail: Adaptec, Inc.
The Essay on Computer Viruses3
Almost every End-user in the world has heard of computer viruses and/or has had one at one point in time. Don?t worry if you haven?t heard about them, you won?t find it in your bloodstream. Unfortunately you may find one in your computer memory or disk storage. ? Some may be as benign as the common cold and others as deadly to your hard drive as the Ebola virus ?. ~ Usually defined as ? a ...
691 South Milpitas Blvd, Milpitas CA 95035 Tel: 1 (800) 959-7274 Fax: 1 (408) 957-7223 AMP Product Information Center AMP Incorporated Harrisburg PA 17105 Tel: 1 (800) 522-6752 Extended Systems, Inc. 5777 North Meeker Ave Boise ID 83704-1520 Tel: (208) 322-7575 Fax: (208) 377-1906 The Parallax IR adapter distributor in North America is: TSC Electronics 1610 Lock ness Place Torrance CA 90501 Tel: (310) 534-2738 Fax: (310) 534-3216 E-mail: Contact: Daniel Tsai The Parallax IR adapter distributor outside North America is: Parallax Research 201 Innovation Centre NTU Nanyang Drive Singapore 639798 Republic of Singapore Tel: +65 793-0855 Fax: +65 793-0775 E-mail:.
