How to make a contact sheet
1. Put dust coat on and remove plastic from enlarger
2. Turn on safe light, exhaust, enlarger and timer
3. set timer on 2 second bursts
4. Set out chemicals in trays and put out tongs
a. Developer 1:9
b. Stop Bath
c. Fixer
5. Fill sink with water
6. Get glass sheet and a piece Collect photography paper and cut test strips
7. Set aperture on 5.6 seconds from brightest
8. Place paper on enlarger base, negative on top(both shiny side up) then place the glass on top of that
9. Expose test strip to 2 second bursts in thin layers using the sheet of cardboard
10. Process
11. View in tray outside then put back in the wash
12. Re set timer to the time that had the best tonal range(
13. Place another piece of paper onto the enlarger base, negative on top and glass on top of that
14. Expose for set tone and process.
How to make a test strip for a proof or larger image
1. Choose which negative under white light
2. Place the negative in the negative carrier shiny side up with the image reversed
The Essay on Positive And Negative Effects Of Slavery In Cultural And Social Terms For The Typical Southerner
Positive and Negative Effects of Slavery in Cultural and Social Terms for the Typical Southerner The slavery in the U.S. was abolished more than a century and a half year ago. Slavery itself is referred to as a social institution defined by law and custom as the most absolute involuntary form of human servitude. (Paupp) Being in slavery, people were treated as property, and were forced to serve ...
3. Make sure that the light is not on in the enlarger and re-insert the negative carrier
4. Set the timer to 2 second bursts
5. Set the enlarger to the desired size, leaving white borders
6. Turn on the safe light
7. Turn on the white light
8. Making sure your paper is away (hidden) turn on the enlarger light
9. Fully open the aperture of the lens
10. Adjust the length of the enlarger head to create the desired image size
11. Focus your image
12. Shut the lens down two F stops to F5.6
13. Decide on an area with good tonal range to use for your test strip
14. Turn off the enlarger light and place your paper in position
15. Expose the test strip in this layers using a cardboard sheet
16. Process the strip and decide on the best exposure time
