The Color of Water, Sample of Reports

38 pages, 18790 words

Compaq Presario

Getting Started Guide

The only warranties for HP products and services are set forth in the express statements

accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

HP assumes no responsibility for the use or reliability of its software on equipment that is not

furnished by HP.

This document contains proprietary information that is protected by copyright. No part of this

document may be photocopied, reproduced, or translated to another language without the

prior written consent of HP.

Hewlett-Packard Company

P.O. Box 4010

Cupertino, CA 95015-4010

USA

This product incorporates copyright protection technology that is protected by method claims

of certain U.S. patents and other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright-protection technology must be

authorized by Macrovision Corporation and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering

or disassembly is prohibited. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,

3 pages, 1314 words

The Essay on American Home Products Corporation 3

1. How much business risk does American Home Products face? How much financial risk would American Home Products face at each of the proposed levels of debt shown in case Exhibit 3? How much potential value, if any can American Home Products create for its shareholders at each of the proposed levels of debt? A combination of business risk and financial risk shows the risk of an organization’s ...

4,819,098, and 4,907,093 licensed for limited viewing uses only.

Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.

Apple, iTunes, FireWire, the FireWire symbol, and iPod are trademarks of Apple Computer,

Inc., registered in the U.S. and other countries.

HP supports lawful use of technology and does not endorse or encourage the use of our

products for purposes other than those permitted by copyright law.

The information in this document is subject to change without notice.

Table of Contents

Setting Up Your PC ………………………………………………………………. 1

Putting Your PC Together ……………………………………………………………………. 1

Connecting to the PC ……………………………………………………………………. 2

Turning On Your PC for the First Time ……………………………………………………. 3

Setting Up and Connecting to Your Internet Account ………………………………….. 4

Transferring your old PC information and files to your new PC …………………. 5

Using Desktop Icons………………………………………………………………………….. 6

Using Compaq Organize software …………………………………………………… 6

Using the Keyboard …………………………………………………………….. 7

Customizing the keyboard buttons ……………………………………………………. 9

2 pages, 701 words

The Essay on One Minute Manager

The One Minute Manager provides a concise and simple method for planning, coaching and evaluating people for organizational and personal success. For many, the book sets forth the principles for productive relationships between a manager and his or her associates. There are three different methods portrayed that will help employers and employees find such a relationship. The first is One Minute ...

Setting Up Sound ………………………………………………………………. 11

Using Speakers ……………………………………………………………………………… 11

Setting up 3-connector sound …………………………………………………………….. 12

Configuring multi-channel audio output for the DVD player ……………………. 13

Setting up 6-connector sound …………………………………………………………….. 14

Configuring the Sound Effect Manager (6-connector) …………………………… 15

Configuring sound for recording with the

Sound Effect Manager (6-connector) ……………………………………………….. 16

Using the Sound Effect Manager (6-connector) …………………………………… 17

Using the Memory Card Reader …………………………………………… 19

Working with the Safely Remove Hardware utility …………………………………… 20

Using the memory card reader …………………………………………………………… 20

Table of Contents

iii

Using a TV as a Monitor ……………………………………………………… 23

3 pages, 1388 words

The Essay on Sound in Mission Impossible

The sound element in film is one of its essential aspects which determines if a movie will be a success. It sets the tone, gives emphasis, changes the mood, determines the pace and takes the plot to a higher level. The sound in a movie is as indispensable as its mise-en-scene, editing, cinematography, screenplay, directing and other key components of a motion picture. In “Mission Impossible 2”, ...

Identifying Cables You May Need ……………………………………………………… 23

Connecting to a TV Set ……………………………………………………………………. 23

Viewing the PC Image on Your TV Screen …………………………………………….. 24

nView tab………………………………………………………………………………… 25

Displays tab……………………………………………………………………………… 26

Disabling the TV Option …………………………………………………………………… 26

nView tab (disabling)………………………………………………………………….. 27

Ge Force tab (disabling) ……………………………………………………………… 27

Displays tab (disabling)……………………………………………………………….. 27

Disconnecting the TV ………………………………………………………………………. 28

Using the HP Personal Media Drive ………………………………………. 29

Connecting the Drive ………………………………………………………………………. 29

1 page, 376 words

The Essay on Forensic Drive Image

Image, a menu prompting the user to select a source drive popped up and I selected Physical Drive as shown below. The Fujitsu Hard-drive was selected in the next step, After selecting the source hard-drive to be imaged the next step is to choose a destination where the image will be stored. The next window also has check boxes that allow the user to verify the image after it is created and there ...

Inserting the Drive ………………………………………………………………………….. 30

Locating the Drive and Assigning a Drive Letter ………………………………………. 31

Using the Drive ……………………………………………………………………………… 32

Disconnecting the Drive……………………………………………………………………. 33

Working with Digital Images……………………………………………….. 35

Working with Digital Images …………………………………………………………….. 35

Playing CDs and DVDs ……………………………………………………….. 37

Playing Music CDs with iTunes…………………………………………………………… 37

Playing CDs and DVDs with Windows Media Player ……………………………….. 38

Playing DVD Movies with InterVideo WinDVD ……………………………………….. 38

Using country/region codes …………………………………………………………. 40

Playing Video CDs (VCD) with InterVideo WinDVD …………………………………. 40

Playing Video CDs (VCD) with Windows Media Player 9………………………….. 41

5 pages, 2118 words

The Term Paper on Dvd Vs Vcr Home Entertainment

INTRODUCTION This report will strive to clearly discern the differences between the average home Video Cassette Recorder (VCR) and the recently developed Digital Video Disc (DVD) system. These two home entertainment components have very clear differences. It is important for consumers to carefully consider each of these concerns before deciding on the home entertainment component that is right for ...

Creating CDs and DVDs ………………………………………………………. 43

Using the Software Quick Reference Table ……………………………………………. 44

Creating Music CDs with iTunes …………………………………………………………. 46

Creating Music CDs with Windows Media Player …………………………………… 47

Creating Data CDs Using Windows XP ………………………………………………… 47

Creating CDs with RecordNow! …………………………………………………………. 48

Creating Music CDs with RecordNow!…………………………………………………. 48

Tips ……………………………………………………………………………………………. 48

Creating CDs to Play in Your Car or Home CD Players with RecordNow! ……… 49

Creating CDs to Play on Your PC ……………………………………………………….. 50

Storing Files on a DVD or CD ……………………………………………………………. 51

Storing Data Files on Disc ………………………………………………………………… 52

7 pages, 3027 words

The Term Paper on Gentoo Install Guide File System

Gentoo Gentoo- web is a distribution that has 3 different install methods. You can just install from the CDs known as stage 3. You can install the base system from CD known as stage 2 and then custom compile the rest of the OS from scratch to bring it to stage 3. This makes the system faster and more responsive but takes some time. Last is the stage 1 install where EVERYTHING is built from ...

Getting Started Guide

Copying a DVD or CD …………………………………………………………………….. 52

Erasing a DVD or CD………………………………………………………………………. 53

Removing Files in RecordNow!…………………………………………………………… 53

Removing Files from a Recorded Data Disc ……………………………………………. 53

Archiving Files on a DVD or CD …………………………………………………………. 54

Creating an Image File…………………………………………………………………….. 54

Saving an Image ……………………………………………………………………………. 55

Burning an Image …………………………………………………………………………… 55

Using Disc Labels …………………………………………………………………………… 55

Disc Labeling with LightScribe ……………………………………………………………. 56

Lightscribe requirements ………………………………………………………………. 56

Burning a label on a LightScribe media disc ……………………………………… 56

Creating a LightScribe label after burning a disc with iTunes………………….. 58

Setting Automatic Recording Options …………………………………………………… 58

Using Compatibility Information …………………………………………………………. 60

Identifying Compatible File Formats …………………………………………………….. 60

Using the Disc Quick Reference Tables…………………………………………………. 61

Using double-layer DVD+R discs…………………………………………………….. 61

Using DVD+R and DVD-R discs………………………………………………………. 61

Using DVD+RW and DVD-RW discs………………………………………………… 61

Using CD-R discs ……………………………………………………………………….. 62

Using CD-RW discs…………………………………………………………………….. 62

Creating Movies Using WinDVD Creator ………………………………… 65

Getting started ………………………………………………………………………….. 65

Using the Preview window……………………………………………………………. 66

Using the Media Library ………………………………………………………………. 66

Using the Storyboard ………………………………………………………………….. 66

Identifying requirements for capturing video………………………………………. 66

Capturing digital camcorder video …………………………………………………. 67

Capturing analog video ………………………………………………………………. 68

Capturing a still image ………………………………………………………………… 68

Editing video files in WinDVD Creator …………………………………………….. 68

Adding images …………………………………………………………………………. 69

Adding audio effects…………………………………………………………………… 69

Adding transition effects ………………………………………………………………. 70

Adding title effects ……………………………………………………………………… 70

Adding video filters ……………………………………………………………………. 70

Adding a menu …………………………………………………………………………. 70

Making a movie ………………………………………………………………………… 71

Recording VHS analog video direct to DVD (select models only)……………… 72

Converting recorded TV to MPEG-2 format (Europe only)………………………. 72

Table of Contents

Getting Help …………………………………………………………………….. 73

Finding Onscreen Guides…………………………………………………………………. 73

Finding Guides on the Web ……………………………………………………………… 73

Using the Onscreen Help and Support Center………………………………………… 74

Using Instant Support ………………………………………………………………………. 74

Using Compaq Connections ……………………………………………………………… 75

Getting messages ………………………………………………………………………. 75

Turning off messages ………………………………………………………………….. 75

Re-enabling messages …………………………………………………………………. 76

Using PC Help & Tools…………………………………………………………………….. 76

Index ………………………………………………………………………………. 77

Getting Started Guide

Setting Up Your PC

WARNING: Please read “Safety Information” in the Warranty

and Support Guide before installing and connecting your PC to

the electrical power system.

WARNING: The power supply is preset for the country/region in

which you purchased your PC. If you move, please check the voltage

requirements before plugging your PC into an AC power outlet.

Putting Your PC Together

Follow the steps on the quick setup poster to set up your PC.

Look in the PC box for printed details or updates regarding your model PC.

After assembling your PC, but before you begin using it, arrange the PC and your

work area to maintain your comfort and productivity. Refer to the Safety & Comfort

Guide for important ergonomic information.

WARNING: To reduce the risk of serious injury, read the Safety &

Comfort Guide. It describes proper workstation setup, posture, and

health and work habits for computer users. It also provides

important electrical and mechanical safety information.

To view the Safety & Comfort Guide:

• Click Start, choose All Programs, choose Documentation, and then click

Safety & Comfort Guide.

• Type

http://www.hp.com/ergo/

into your Web browser address box, and then press Enter on the keyboard.

Setting Up Your PC

Connecting to the PC

Your PC features and

location, availability,

and number of

connectors may vary.

Connect your main hardware devices like the monitor, keyboard, and mouse to the

back of the PC. Other peripheral devices like a printer, scanner, camera, or other

equipment also plug into connectors on the back of your computer. Some PC models

also have connectors on the front of the PC. The table does not show all connectors.

Connector

symbol

Description

Mouse (PS/2 connector)

Keyboard (PS/2 connector)

Universal Serial Bus (USB) for mouse,

keyboard, digital cameras, or other devices

with USB connectors

Printer (parallel)

Monitor

Serial port for some digital cameras or

other serial devices

Serial

Getting Started Guide

Connector

symbol

Description

Audio Line Out (powered speakers)

OUT

Audio Line In

Headphones

Microphone

FireWire® (IEEE 1394) for video cameras

or other devices with very fast transfer rates

Turning On Your PC for the First Time

After you have completed the steps on the quick setup poster, you are ready to turn

on your PC.

1 Press the Power button on the monitor.

2 Press the On button on the front of the PC.

3 Turn on the speakers, if they are present.

4 Click an option to select your language (if applicable for your model).

Click

OK, and then confirm your selection by clicking Yes. Wait until the PC makes

preparations. (It may take up to 30 minutes for this one-time language setup on

the PC.)

5 Set up Microsoft® Windows® by following the onscreen instructions.

Setting Up Your PC

6 Double-click the large Internet Access icon, if it is present on your desktop.

Wait until the PC displays the Easy Internet Sign-up window, and then follow the

onscreen instructions.

7 Register your PC.

Setting Up and Connecting to Your

Internet Account

Before you can connect to the Internet, you must sign up with an Internet service

provider (ISP).

HP has made arrangements with leading ISPs to help you sign up for

Internet service using Easy Internet Sign-up (available on select models only).

NOTE: You may use any other ISP of your choice, or transfer your existing ISP

account to this PC.

Use Easy Internet Sign-up to sign up for a new or transfer an existing ISP account

(select ISPs only).

The software programs for available ISPs are part of your PC. If

you decide to subscribe to high-speed broadband, cable or digital subscriber line

(DSL), contact your ISP for any specific software and hardware you may need.

1 Make sure the modem or other Internet access cable is connected.

NOTE: Easy Internet Sign-up finds and obtains updated information about ISP

services by temporarily connecting to the Internet. The PC uses either the PC

modem connected to an active telephone service line or an active broadband

(cable or DSL) connection.

2 Choose an ISP using Easy Internet Sign-up. To open Easy Internet Sign-up:

Double-click the Easy Internet Sign-up icon on the desktop.

Click Start on the taskbar, choose All Programs, choose

Online Services, and then click Easy Internet Sign-up.

Follow the onscreen instructions.

NOTE: The folder called Online Services includes icons for accessing various

online services, but they may not be present in all countries/regions.

3 Connect to your ISP and the Internet (after you established your ISP account on

this PC).

Use one of these methods:

•

Double-click the ISP-provided icon on the desktop.

•

Getting Started Guide

Press the Connect (or Internet) button on the keyboard (select

models only).

•

If your PC is always connected to your ISP, open your browser program,

such as Internet Explorer: Click Start, choose All Programs, choose

Online Services, and click Internet Explorer.

NOTE: If you are using MSN, AOL, or others and have questions, contact the ISP

directly.

Installing Software and Hardware Devices

After you turn on the PC the first time, you can install any software programs that

came on CDs or DVDs included in the PC box (select models only).

You may wish to install additional software programs or hardware devices on your

PC. Before installation, make a restore point using the Microsoft System Restore

program, and then restart the PC after installation. By using System Restore, you

insure you have a point to return to before an issue occurred. For information about

System Restore, refer to the Microsoft Web site at:

http://www.microsoft.com/worldwide/

Choose software that is compatible with your PC — check the operating system,

memory, and other requirements listed for the new software for compatibility with

your PC.

NOTE: Only use original licensed software. Installing copied software may be

illegal or may infect your PC with a virus.

Install the new software according to the directions provided by the software

manufacturer. Check the manufacturer’s documentation or customer service

information for help if you need it.

For antivirus software, uninstall the existing software program before reinstalling it

or installing a new antivirus program.

Transferring your old PC information and files to

your new PC

See the built-in Microsoft Windows Help and Support Center; search for transfer

wizard, and select the overview article, “Files and Settings Transfer Wizard

overview.” This information describes a Microsoft solution for moving your files

onto your new PC.

Setting Up Your PC

Using Desktop Icons

The desktop has shortcut icons that make it easy to find the things you need.

Icon

Opens

Use it to

Help and Support (select

models only)

View onscreen Help information

about your PC.

Easy Internet Sign-up

Set up a new or an existing

Internet account.

Compaq Organize (select

models only)

Organize your PC shortcuts and

your favorite Internet destination

links.

Using Compaq Organize software

Compaq Organize software (select models only) is a desktop tool you use to

organize both your PC shortcuts and your favorite Internet destination links. You use

it to organize the important things you do on the PC and the Internet, and to

arrange them the way you want. Compaq Organize makes all your information

available with just a few mouse clicks.

Compaq Organize looks like a window with multiple category frames. Each

category has links to Internet destinations or shortcuts to software programs or files

on your PC. Use the player area for viewing pictures, for listening to your MP3

music files stored on your computer, or for watching video clips. For searching,

there is a search bar at the top of Compaq Organize where you can select the

search engine you want to use.

To open Compaq Organize:

Double-click the desktop icon.

1 Click Start on the taskbar.

2 Choose All Programs.

3 Click Compaq Organize.

Getting Started Guide

Using the Keyboard

Your keyboard has an arrangement of standard keys, indicator lights, and special

buttons (select models only).

Identifying Special Keyboard Buttons

There are special buttons (select models only) at the top of the keyboard. (Some

models have some of these special buttons on the left side of the main keys.) These

buttons operate a CD or DVD player, connect you to the Internet, or provide quick

access to specific functions.

NOTE: The number, location, and labeling of buttons vary by keyboard model.

Icon

Feature

Standby

Puts PC into power-saving mode (screen is

blank but PC is still on).

To make screen

reappear, press the Esc key, or press

Standby again. May take 10–30 seconds

before screen reappears.

User

Switches between the PC users.

Compaq

My Presario

Links to Compaq Web site.

Help

Opens the Help and Support Center.

Pictures

(Photos)

Opens an imaging software program. Can

be reconfigured.

Music

Compaq or

Description

Starts iTunes or Windows Media Player.

Can be reconfigured.

Video

Opens video software program. Can be

reconfigured.

Using the Keyboard

Icon

Feature

Description

Shopping

Sports

Finance

Connect

Internet

Chat

Goes to popular Web sites. Can be

reconfigured to open a site or software

program.

E-Mail

Entertainment

Offers

Calculator

Opens the calculator. Can be reconfigured.

Media

controls (CD/

DVD/MP3)

Operates a disc player.

A Open and close disc tray

B Record

C Play or pause

D Stop

Getting Started Guide

Skip to the previous track

Skip to the next track

Icon

Feature

Volume

control

(Volume knob

or Volume Up

and Volume

Down

buttons)

Volume knob: Increases speaker volume

when turned clockwise and decreases

volume when turned counterclockwise. It

can be turned indefinitely, even after

maximum sound has been reached.

Mute

Description

Turns speaker sound on and off.

Volume Up and Down buttons: Press the

Volume Up

button to increase volume

and the Volume Down

button to

decrease volume.

NOTE: The number, location, and labeling of buttons vary by keyboard model.

Customizing the keyboard buttons

You can customize some of the special buttons on the keyboard (select models only)

to open different programs or files or to connect to favorite Web sites:

1 Click Start on the taskbar.

2 Choose Control Panel.

3 Click Printers and Other Hardware, if it is present.

4 Double-click Keyboard.

5 On the Buttons tab, double-click the button you want to change.

6 For the Button configuration, click the Down arrow to the right of the list and

choose the button capability, such as Simple web page with label.

7 Enter a display label and the address information. For a Web page, enter

the URL.

8 Click OK.

9 On the Buttons tab, click Apply.

10 Repeat steps 5 through 9 for each button you want to customize.

11 Click OK to finish.

NOTE: Clicking the Restore Defaults button on the Button tab restores all of the

Internet buttons to the factory settings.

Using the Keyboard

Getting Started Guide

Setting Up Sound

Using Speakers

Speakers are included with the monitor (select models only) or are sold separately.

Your PC supports only an active (powered) speaker system; the speaker system must

have its own power cord.

NOTE: A stereo speaker set is a left-right, two-channel speaker system. A multi-

channel audio speaker system is a system with more than two channels, and it may

include a subwoofer. For example, 7.1 channels, referred to as an eight-speaker

mode, uses two front speakers (left-right), two side speakers (left-right), two rear

speakers (left-right), a center speaker, and a subwoofer.

NOTE: If your PC

includes a sound

card (select models

only), refer to the

documentation that came

with the sound card.

The PC supports a variety of sound options and speaker configurations. You may set

up your PC for two stereo speakers or for multi-channel audio speaker systems.

Connect your speaker system to the PC, and then configure the audio software for

sound output. For details on connecting stereo speakers to the PC, see the quick

setup poster. Location, availability, and number of connectors may vary.

• If your PC model includes three sound connectors (select models only) on the

back of the PC, see “Setting up 3-connector sound” on page 12.

OUT

• If your PC model includes six sound connectors (select models only) on the back

of the PC, see “Setting up 6-connector sound” on page 14.

Setting Up Sound

Setting up 3-connector sound

PC models that include three sound connectors (select models only) on the back of

the PC support up to six channels of sound (5.1 speaker output) and use the

Multi-channel Sound Manager to configure the software settings.

Connecting the speaker system to the PC (3-connector)

The 3-connector audio speaker system uses the Audio In, Audio Out, and Mic

connectors on the back or front of the PC. Refer to the quick setup poster for the

location of the connectors.

1 With the speaker system off, assemble the speakers and, if used, the subwoofer.

Refer to the speaker documentation.

2 Turn off the PC.

3 Connect the three audio cable plugs from the speaker system to the connectors

on the back of the PC. (See the following table.)

Connect speaker plugs for:

2 Speaker

Mode

4/4.1

Speaker

Mode

6/5.1

Speaker

Mode

To PC

connector

Front

speakers

Front

speakers

Front

speakers

Audio Out

(lime green)

Not used for

speakers

Rear speakers

Audio In

(blue)

Not used for

speakers

Not used for

speakers

Center/

subwoofer

speakers

Connector

icon

OUT

Mic-1 (pink)

4 Turn on the PC.

5 Turn on the speaker system.

6 Configure the audio output for this 3-connector multi-channel speaker system by

performing the following procedure.

Configuring the Multi-Channel Sound Manager

(3-connector)

1 Click Start on the taskbar.

2 Choose All Programs.

Getting Started Guide

3 Click Multi-channel Sound Manager. The Multi-channel Audio

Configuration window opens.

NOTE: If you do not see the Speaker Configuration tab, your PC does not have

the multi-channel capability. However, it still has two-channel (stereo) output.

4 Click the Speaker Configuration tab.

5 Select the option describing the number of speakers in your system, for

example, 6/5.1 speaker mode. You can click the Speaker Test tab and

then click a speaker icon to test it.

6 Click OK.

To use a microphone for recording, see “Using the microphone with the MultiChannel Sound Manager (3-connector)” on page 13.

To hear DVD movies recorded with multi-channel audio from all speakers, change

the audio properties for WinDVD to match your speaker configuration (if your

InterVideo WinDVD program supports more than two channels).

Refer to

“Configuring multi-channel audio output for the DVD player” on page 13.

Using the microphone with the Multi-Channel Sound

Manager (3-connector)

The 3-connector multi-channel speaker system (select models only) connects to the

PC using the Microphone, Audio (Line) In, and Audio (Line) Out connectors on the

back of the PC. Your PC may have a second microphone connector on the front of

the PC. If present, this microphone connector is ready to use and does not affect the

use of the multi-channel audio speaker system.

To use the microphone connector on the back of the PC with a 3-connector multichannel audio speaker system, you must disconnect the cables for the multi-channel

speakers and change the audio configuration to a two-channel audio system. Refer

to “Configuring the Multi-Channel Sound Manager (3-connector)” on page 12 to set

the audio configuration.

Configuring multi-channel audio output for the

DVD player

The InterVideo WinDVD program (select models only) is set up for two-speaker

(stereo) output. To hear all speakers from DVD movies recorded with multi-channel

audio, change the audio properties for WinDVD to match your speaker

configuration (if your InterVideo WinDVD program supports more than two

channels):

1 Insert a DVD, or start InterVideo WinDVD. (Click Start, choose All

Programs, choose InterVideo WinDVD, select InterVideo WinDVD

Player, and then click InterVideo WinDVD.) The WinDVD video window

opens.

2 Right-click anywhere in the WinDVD video window, and then click Setup. The

Setup window opens.

Setting Up Sound

3 Click the Audio tab.

4 Click the option for the number of speakers to match your multi-channel speaker

system.

NOTE: When using the digital out connector for sound (6-connector, select

models only), select Digital (S/PDIF) out to External Processor.

5 Click Apply.

NOTE: To test the speakers (multi-channel speakers only), click the Test button.

The WinDVD control panel shows the speaker number being used. Click Stop.

6 Click OK.

NOTE: If you want to play a stereo DVD, change the audio properties of WinDVD to

match the recorded DVD audio output.

Setting up 6-connector sound

PC models that include six sound connectors (select models only) on the back of the

PC, support up to eight channels of sound (7.1 speaker output) and use the Sound

Effect Manager to configure the software settings.

Identifying the audio connectors (6-connector)

The PC supports a maximum of eight speakers in a multi-channel speaker system by

using four of the six audio connectors on the back of the PC.

This PC also has digital audio out and digital audio in connectors for digital sound

devices such as a DVD recorder or a digital stereo receiver/amplifier.

A Side speaker port

(side)

The four connectors (A, B, C, and E) for the 6-connector multi-channel speaker

system are on the back of the PC.

B Rear speaker port

(rear)

C Center speaker/

subwoofer port

(c/sub)

D Microphone (mic)

E Audio line out (out) for

front speakers

F Audio line in (in)

Getting Started Guide

The previous figure shows the six audio connectors arranged on the back of the PC:

the four connectors (A, B, C, and E) used for eight-channel audio and the

connectors for the microphone (D, mic) and the audio line in (F, in).

Connecting the speaker system to the PC (6-connector)

1 With the speaker system off, assemble the speakers and, if used, the subwoofer.

Refer to the speaker documentation.

2 Turn off the PC.

3 Connect the audio cable plugs from the speaker system subwoofer to the

connectors on the back of the PC. (See the following table.)

Connect speaker cable (plug) for:

To PC port (label, name,

color):

Front speakers (or two stereo speakers)

Audio line out (E, out, lime green)

Side speakers

Side speaker (A, side, gray)

Rear speakers

Rear speaker (B, rear, black)

Center speaker/subwoofer

(C, c/sub, gold)

4 Turn on the PC.

5 Turn on the speaker system.

6 Configure the audio output for this 6-connector multi-channel speaker system by

performing the following procedure.

Configuring the Sound Effect Manager

(6-connector)

1 Click Start on the taskbar.

2 Choose Control Panel.

3 If it is present, click Sounds, Speech, and Audio Devices.

4 Click Sound Effect Manager. The window opens.

5 Click the Speaker Configuration button.

6 Select the option describing the number of speakers in your system, for

example, 7.1 speakers.

A connector with no descriptive text in the Connection Guide indicates that the

connector is not used for the selected speaker configuration.

NOTE: You can click the Speaker Test button to test the speakers.

7 Click OK.

Setting Up Sound

To hear DVD movies recorded with multi-channel audio from all speakers, change

the audio properties for WinDVD to match your speaker configuration (if your

InterVideo WinDVD program supports more than two channels).

Refer to

“Configuring multi-channel audio output for the DVD player” on page 13.

To use a microphone or set up the PC for recording, see “Configuring sound for

recording with the Sound Effect Manager (6-connector)” on page 16.

To use the other features of the Sound Effect Manager, see “Using the Sound Effect

Manager (6-connector)” on page 17.

Configuring sound for recording with the

Sound Effect Manager (6-connector)

The microphone connector on the front of the 6-connector audio PC is ready to use

for recording sound. If you want to use another connector for recording, such as the

digital audio in connector, use these steps to select it.

NOTE: The pink and green connectors on the front of a PC with 6-connector

sound can be retasked to perform other audio functions; refer to “Using the Audio

Wizard in the Sound Effect Manager (6-connector)” on page 18.

1 Click Start on the taskbar.

2 Choose Control Panel.

3 If it is present, click Sounds, Speech, and Audio Devices.

4 Click Sounds and Audio Devices.

5 Click the Audio tab.

6 In Sound recording select the default device from the drop-down list. Choose:

•

RealTek HD Front Pink Jack to use the microphone connector on the

front of the PC.

•

RealTek HD Digital Input to use the digital audio in connector on the

back of the PC.

•

RealTek HD Front Green Jack to use the green connector on the front

of the PC.

•

Back Line in/Mic, Front Line in to use the audio line in (in) or the

microphone (mic) connectors on the back of the PC, or to use the audio line

in connector on the front of the PC.

NOTE: For this selection, the audio line in connector is ready to use. To use

the back mic connector, follow the steps in “Selecting the Back Line in/Mic,

Front Line in connectors for recording (6-connector)” that follows this

procedure.

7 Click Apply, and then click OK to close the window.

Getting Started Guide

Selecting the Back Line in/Mic, Front Line in connectors for

recording (6-connector)

Perform these steps when you select Back Line in/Mic, Front Line in for the

sound recording in step 6 of the previous procedure.

NOTE: If you want to record from the mic connector on the back of the PC, you must

perform these steps.

1 Click Start on the taskbar.

2 Choose Control Panel.

3 If it is present, click Sounds, Speech, and Audio Devices.

4 Click Sounds and Audio Devices.

5 On the Volume tab, in the Device volume area click the Advanced button. The

Master Volume window opens.

6 Click Options and choose Properties.

7 In the Mixer device area, select Back Line in/Mic, Front Line in from the

drop-down list. Click OK.

8 The recording control window opens and shows Line In 1 or 2 selected. The line

in connector you plug into is used. However, to use the mic connector on the

back of the PC, click the Select check box under Microphone so a check mark

appears in the box.

Using the Sound Effect Manager (6-connector)

The Sound Effect Manager has four buttons that display its control screens.

To open the Sound Effect Manager:

1 Click Start on the taskbar.

2 Choose Control Panel.

3 If it is present, click Sounds, Speech, and Audio Devices.

4 Click Sound Effect Manager. The window opens.

5 Click a button near the top of the window to see that control screen.

The Sound Effect Manager control screens:

• Sound Effect — selects the Environment and the Equalizer settings. You can

select an Environment, such as Under Water or Auditorium. To use the

Equalizer, click the Power button in the center of the circular equalizer control to

turn on the Equalizer. You can click a preset button, such as Pop or Live, or

manually adjust the settings and then save them for easy selection later.

• Speaker Configuration — selects the number of speakers, shows the

Connection Guide, and has the Speaker Test button to test the speakers. A

connector with no descriptive text in the Connector Guide indicates that the

connector is not used for the selected speaker configuration.

Setting Up Sound

• Digital Audio — selects the digital audio output and digital audio frequency

for the digital audio connectors on the PC.

• Audio Wizard — opens a window that shows the connector panel on the

front of the PC. To close the window without enabling the wizard, click OK.

To enable the Audio Wizard:

Make sure the Enable auto detection check box is selected to enable the

wizard. Click OK to close the window.

Using the Audio Wizard in the Sound Effect Manager

(6-connector)

When you click the Audio Wizard button, a window opens that shows the three

audio connectors on the front of the PC.

NOTE: The connectors on the front of your PC may be of a different type or may be

in a different arrangement; look for the connector icon and color. Location,

availability, and number of connectors may vary.

Connector

Name

Icon

Color

Audio Line In

Light blue

Microphone

Headphones

Audio Line Out

Pink

OUT

Lime

green

Retasking using the Audio Wizard (6-connector)

With the Audio Wizard enabled, both the microphone connector (B) and the

headphones connector (C) on the front of the PC can be retasked to perform a

different audio function. These two connectors are universal audio jacks. When you

plug in a cable, the Wizard asks you to select the function for the cable from a list,

and then it sets the universal audio jack to perform as the selected function. The

functions are:

• Stereo speaker (out)

• Microphone (in)

• Headphone (out)

• Audio line in

Getting Started Guide

Using the Memory Card Reader

Digital cameras and other digital imaging devices use memory cards, or media,

to store digital picture files. The optional memory card reader (select models only)

can read and write to a variety of types of memory cards and the IBM Microdrive

disk drive.

The card reader is accessible directly on the front of the PC. It has four horizontal

card slots, which accept the memory cards and the Microdrive disk drive.

Card

4-slot reader

CompactFlash Type I media

Lower-left slot

CompactFlash Type II media

Lower-left slot

IBM Microdrive disk drive

Lower-left slot

Secure Digital (SD) Memory Card

Upper-right slot

MultiMediaCard (MMC)

Upper-right slot

Memory Stick (MS) Memory Card

Lower-right slot

Memory Stick (MS-Pro) Memory Card

Lower-right slot

SmartMedia (SM) Memory Card

Upper-left slot

xD media

Upper-left slot

You can place media in one or more of the card slots and use each media

independently. Place only one piece of media in a slot at one time.

Each card slot has its own drive letter and icon. When you insert media, the display

label may change to the title of the media, if the title is present.

Using the Memory Card Reader

Working with the Safely Remove

Hardware utility

CAUTION: Do not click Stop in the Safely Remove Hardware window

with the USB Mass Storage Device selected. Doing so removes the

operating system recognition of the memory card reader from your

PC; you must restart the PC to see your memory card reader again.

If you open the Safely Remove Hardware window by mistake, click Close.

Using the memory card reader

NOTE: CompactFlash and Microdrive are keyed and cannot be inserted incorrectly.

Insert the receptacle edge (holes) of this media into the slot.

1 Insert the media into the card slot until it stops. The activity light (A) on the

memory card reader lights, and the PC automatically detects the media.

2 The PC opens a window so you can use the media contents. You can copy files

from or to the media.

3 When you are finished, right-click the drive icon, select Eject, check that the

activity light is on but not blinking, and then remove the media. A steady

activity light indicates that the PC is not reading or writing the media.

WARNING: Do not try to remove media when the activity light is

blinking; doing so may cause loss of data.

Getting Started Guide

Memory card reader

A Activity light

B Upper-left slot

C Lower-left slot

D Upper-right slot

E Lower-right slot

Card

Insert

Into reader slot

CompactFlash Type I media

Receptacle edge (holes)

C (lower-left)

CompactFlash Type II media

Receptacle edge (holes)

C (lower-left)

IBM Microdrive disk drive

Receptacle edge (holes)

C (lower-left)

Secure Digital (SD)

Memory Card

Facing up

D (upper-right)

MultiMediaCard (MMC)

Facing up

D (upper-right)

Memory Stick (MS)

Memory Card

Facing up

E (lower-right)

Memory Stick (MS-Pro)

Memory Card

Facing up

E (lower-right)

SmartMedia (SM)

Memory Card

Facing up

B (upper-left)

xD media

Facing up

B (upper-left)

Using the Memory Card Reader

Getting Started Guide

Using a TV as a Monitor

Your PC may have TV-out (select models only) capability, which means you can

connect it to a television to view the computer image on a TV screen. With the

TV-out feature, you can view the computer image, watch DVD movies (if you have

a DVD player), or play games on your TV.

Identifying Cables You May Need

To connect a TV to the PC, you may need a video cable and an audio cable (not

provided; purchase separately).

The type of video cable you need depends on

your TV:

• If your TV has an S-video jack, you need an S-video cable.

• If your TV has a composite video jack, you need a composite video cable and,

depending on the jacks on the back of your PC, you may also need an S-video

adapter cable.

Connecting to a TV Set

To use your TV as a PC screen:

1 Turn off the PC.

2 Connect the TV cable using one of the following arrangements, depending on

the connection jacks on your TV:

•

A S-video cable

If your TV has an S-video jack, connect an S-video cable from the S-video In

jack on the TV to the S-video jack on the back of the PC.

B S-video jack

C Back of PC

Using a TV as a Monitor

•

D Composite video cable

If your TV has a composite video jack and your PC has a composite video

jack, connect a composite video cable to the Video In jack on the TV to the

composite video jack on the back of the PC.

E Composite jack

C Back of PC

•

D Composite video cable

If your TV has a composite video jack and your PC has only an S-video

jack, connect a composite video cable to the Video In jack on the TV and to

an S-video adapter cable. Connect the S-video adapter cable to the S-video

jack on the back of the PC.

F S-video adapter cable

B S-video jack

C Back of PC

NOTE: The S-video adapter cable is only needed if there is no composite video jack

on the back of the PC.

3 To have sound come from your TV instead of from your PC, plug an audio cable

into the audio input jack (Audio Line In) on the TV and plug the other end of the

audio cable into the Audio Out jack (green connector) on the back of the PC.

Viewing the PC Image on Your TV

Screen

NOTE: The type of video card on your PC determines how the PC selects the TV-out

option. Some options and menus in this procedure may be different for your PC.

1 Make sure the video and audio cables are connected before you turn on the TV

and the PC.

2 Turn on the TV. Press the Video/TV button on your remote control to select the

Video setting, not the TV setting.

Getting Started Guide

3 Turn on your PC.

4 When the Windows desktop appears, right-click an empty area of the desktop

and choose Properties. The Display Properties window opens.

5 Click the Settings tab.

6 Click the Advanced button.

7 Look at the tabs, and follow the steps that apply to your PC:

•

If you see the nView tab, continue with “nView tab.”

•

If you see the Ge Force FX xxxx tab, continue with “Ge Force tab.” (FX xxxx

is the video card number.)

•

If you see the Displays tab, continue with “Displays tab.”

nView tab

1 Click the nView tab.

2 To view the computer image on your PC monitor and your TV simultaneously, in

the nView Display Mode area select Clone.

To view the PC image on just the TV, in the nView Display Mode area, select

Standard [Dualview], click the Device Settings button, choose Select

Output Device, and then select the TV option.

3 Click the OK button.

4 When the PC image appears on the TV screen, click Yes to keep the setting.

You have 15 seconds to accept this new setting before it reverts to the previous

setting.

5 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

Ge Force tab

1 Click the Ge Force FX xxxx tab.

2 To view the computer image on your PC monitor and your TV simultaneously, in

the nView Modes area select Clone from the drop-down list.

To view the PC image on just the TV, in the nView Modes area select Single

display from the drop-down list, and then, if necessary, in the Current display

area select TV from the drop-down list.

3 Click the Apply button.

4 When the PC image appears on the TV screen, click Yes to keep the setting.

You have 15 seconds to accept this new setting before it reverts to the previous

setting.

5 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

Using a TV as a Monitor

Displays tab

1 Click the Displays tab. This tab shows a monitor and a TV. Some PCs (select

models only) show a TV for standard television and an HDTV for high-definition

television. The upper-left corner of each display icon is a button and a status

indicator. A red corner indicates an inactive display; a green corner indicates

an active display.

NOTE: Your TV must be connected to the PC to change the display.

2 To view the computer image on your PC monitor and your TV simultaneously,

click the upper-left corner of the TV icon so that it is green. Click Apply.

To view the PC image on just the TV, click the TV corner so it is green, and then

click the monitor corner so it is red. Click Apply.

3 When the PC image appears on the TV screen, click Yes to keep the setting.

You have 15 seconds to accept this new setting before it reverts to the previous

setting.

4 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

NOTE: Some PC models can connect more than one display device (CRT

monitor, flat panel monitor, TV, and so on) to the PC. You can change where the

PC desktop appears by pressing Alt+F5. (Press the Alt key and the F5 key on

the keyboard at the same time.) Each time you press the Alt+F5 key

combination, the PC desktop appears on the next device. If Alt+F5 does not

work, restart the PC and try again.

Disabling the TV Option

When you want to disconnect the TV from your PC, you may need to disable the TV

option to return your PC display to its original resolution.

1 Right-click an empty area of the screen, and choose Properties. The Display

Properties window opens.

2 Click the Settings tab.

3 Click the Advanced button.

4 Look at the tabs, and follow the steps that apply to your PC:

•

Getting Started Guide

If you see the Ge Force FX xxxx tab, continue with “Ge Force tab

(disabling).”

•

If you see the nView tab, continue with “nView tab (disabling).”

If you see the Displays tab, continue with “Displays tab (disabling).”

nView tab (disabling)

1 Click the nView tab.

2 If you viewed the computer image on your PC monitor and your TV

simultaneously, select nView Display Mode in the list on the left, and then select

the Standard [Dualview] option.

If you viewed the PC image on just the TV, select nView Display Mode in the list

on the left, select Standard [Dualview], click the Device Settings button,

choose Select Output Device, and then select the Analog Display option.

3 Click the OK button.

4 When the PC image appears on the monitor screen, click Yes to keep the

setting. You have 15 seconds to accept this new setting before it reverts to the

previous setting.

5 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

Ge Force tab (disabling)

1 Click the Ge Force FX xxxx tab.

2 In the nView Modes area select Single display from the drop-down list. In the

Current display area select Analog Display or Digital Display.

3 Click the Apply button.

4 When the PC image appears on the monitor screen, click Yes to keep the

setting. You have 15 seconds to accept this new setting before it reverts to the

previous setting.

5 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

Displays tab (disabling)

1 Click the Displays tab. This tab shows a monitor and a TV. (Select models

show a monitor, a standard TV, and an HDTV.) The upper-left corner of each

display icon is a button and a status indicator. A red corner indicates an

inactive display; a green corner indicates an active display.

2 Click the upper-left corner of the TV icon so it is red, and then click the upper-left

corner of the monitor icon so it is green. Click the Apply button.

3 When the PC image appears on the monitor screen, click Yes to keep the

setting. You have 15 seconds to accept this new setting before it reverts to the

previous setting.

4 Click the OK button to save changes, and then click OK again to close the

Display Properties window.

Using a TV as a Monitor

Disconnecting the TV

1 Disable the TV option. See the previous procedure.

2 Turn off the TV and the PC.

3 Remove the video cable from the TV and the PC.

4 Remove the audio cable from the TV and the PC.

5 Reconnect your PC speaker cable to the Line Out jack (lime-green connector)

on the back of the computer.

Getting Started Guide

Using the HP Personal Media Drive

The HP Personal Media Drive (sold separately) can be used as an internal or

external USB hard disk drive designed to quickly and easily increase your storage

capacity and to transfer media files such as digital photos, music, videos, and other

important files. You can also use the HP Personal Media Drive to back up other

drives on your PC.

NOTE: Before starting the System Recovery Program, remove the HP Personal

Media Drive. See your System Recovery documentation.

Connecting the Drive

As an external drive, the HP Personal Media Drive connects and disconnects easily

from a USB 2.0 connector on the front or the back of most PCs. The drive comes

with software, an external USB cable, and an external power cord and power

adapter. For information about connecting and using the HP Personal Media Drive

as an external drive, refer to the documentation that came with the HP Personal

Media Drive.

Using the HP Personal Media Drive

For some PCs (select models only), the HP Personal Media Drive is designed to fit

inside a horizontal or vertical drive bay.

This special drive bay includes an internal USB port and power cable that connect

to the drive when it is inserted.

NOTE: The drive can be

easily inserted and

removed from the bay

without turning off the

PC. This feature is

sometimes referred to as

warm swappable.

The drive turns on when it is plugged into an active USB port. If the PC is turned on

with the drive connected, the drive automatically turns on. When the USB cable for

the drive is not plugged in or when the USB power from the PC is turned off, the

drive automatically turns off. When the PC is in standby mode (a reduced power

state), the drive remains turned on.

WARNING: Do not move the PC with the HP Personal Media Drive

inserted in the bay or connected to a USB port on the PC. This can

cause damage to the drive and cause data loss.

Inserting the Drive

1 Turn on the PC.

2 Line up the ridges on the bottom of the drive with the two slots on the side or the

bottom of the PC drive bay. Do not force the drive into the bay; it should slide

easily into the bay.

Getting Started Guide

3 Slide the drive all the way into the drive bay until the drive is firmly connected

to the internal power and USB port. With the PC turned on, the power indicator

(B) on the front of the drive is lit when the drive is inserted correctly.

A Drive activity indicator

light

B Power on indicator

light

C HP Personal Media

Drive guide ridges

Locating the Drive and Assigning a

Drive Letter

After you insert the drive into the PC, you can find the drive in My Computer. The

operating system automatically assigns a letter to the drive. The assigned letter

depends on the other storage devices connected to the PC.

To locate the drive:

NOTE: To avoid multiple

hard disk drives using the

same drive letter, when

connecting and removing

the drives, assign the

letter Z to the HP Personal

Media Drive.

1 Click Start on the taskbar.

2 Click My Computer.

3 Select the drive under Hard Disk Drives. The default name is HP Personal Media

Drive.

You can permanently assign a drive letter to avoid the letter changing when you

connect and disconnect this drive and other devices. Also, it is easier for a software

program to locate the files on the HP Personal Media Drive if a drive letter is

assigned. Some programs may not be able to find files if the drive has a new drive

letter.

It is best to always remove your drive safely to avoid errors. See “Disconnecting the

Drive” on page 33.

Using the HP Personal Media Drive

To assign a drive letter:

1 Click Start on the taskbar.

2 Right-click My Computer.

3 Select Manage and then click Disk Management.

4 Right-click the HP Personal Media Drive.

5 Select Change Drive Letter and Paths.

6 Click Change and select a letter, and then apply the changes by clicking OK.

The default volume label of this drive is HP Personal Media Drive. You can rename

the drive in the My Computer window by right-clicking the drive, selecting

Rename, and then typing a new name. Rename the drive if you have more than

one HP Personal Media Drive.

Using the Drive

To store files:

The best way to transfer files to the HP Personal Media Drive is to drag them from

your local hard disk drive. This allows you to place files in specific folders. Refer to

the following procedures for more detailed instructions about creating linked folders.

To play media files:

You can play media from an HP Personal Media Drive.

1 Click Start on the taskbar.

2 Click My Computer.

3 Double-click the HP Personal Media Drive icon to locate your media file.

4 Double-click the file. Most media files open in Windows Media Player.

To play music files:

You can play music files that are stored on the HP Personal Media Drive:

1 Click Start on the taskbar, click My Computer, and then double-click the

HP Personal Media Drive icon.

2 Create a personal music folder by right-clicking the drive window and choosing

New and then Folder. Type a name for your personal music folder.

3 Drag or copy your music files into this created folder.

4 Open Windows Media Player by clicking Start, All Programs, and then

clicking Windows Media Player.

5 In the Windows Media Player window, click Tools, select Options, and then

select the Media Library tab.

6 Click the Monitor Folders button.

7 Click Add to add a pathway to your HP Personal Media Drive.

8 Browse to locate your created music file folder on your HP Personal Media

Drive, and then click OK.

Getting Started Guide

9 Click OK, and then OK again to close the Options window. Now your music

files on your HP Personal Media Drive appear in the Windows Media Player

library when your drive is connected to the PC.

When you disconnect the drive, your music files may still appear in the Windows

Media Player Library. To refresh your PC, open and close Windows Media Player. If

that doesn’t work, restart the PC.

Disconnecting the Drive

You can safely remove the drive when it is not active. When the amber activity light

is blinking, the drive is active saving or transferring data. Removing the drive while

the light is blinking may cause data loss or damaged files.

To disconnect the HP Personal Media Drive safely:

1 Close all programs that may be accessing your HP Personal Media Drive. Make

sure that the activity light on the drive is off.

2 Double-click the Safely Remove Hardware icon in the system tray

(on the Start taskbar).

If this icon is hidden, click the arrows on the

taskbar to display it. The Safely Remove Hardware window opens.

3 Double-click USB Mass Storage Device to locate your HP Personal Media

Drive. USB Mass Storage Device may be listed twice. One may contain a

memory card reader or other mass storage drive.

4 Select the HP Personal Media Drive, and then click OK. The name of the

drive may be different if you renamed it, or it may appear as Generic Volume

followed by the assigned drive letter.

A Safe to Remove Hardware message appears in the system tray, letting you

know that the device is safe to disconnect.

5 Click Close.

6 Disconnect the drive by removing it from the drive bay.

Using the HP Personal Media Drive

Getting Started Guide

Working with Digital Images

You can connect a digital image source, such as a digital camera or a digital video

camera, directly to the PC or through a docking station. Digital picture files you

copy or download from the device appear in the My Pictures folder. You can copy

digital picture files from the memory cards used by digital cameras and other digital

imaging devices by using the memory card reader (select models only).

Refer to

“Using the Memory Card Reader” on page 19.

Working with Digital Images

Getting Started Guide

Playing CDs and DVDs

Your PC includes software that lets you play music CDs and DVD movies (select

models only).

This section describes how to:

• Play music CDs using Windows Media Player, or play music CDs or DVDs

with iTunes.

• Play DVD movies using Windows Media Player or InterVideo WinDVD (select

models only).

• Play video CDs (VCD) with InterVideo WinDVD or Windows Media Player.

Playing Music CDs with iTunes

You must have either a CD or DVD drive.

1 Insert the music CD into your CD or DVD drive.

•

The iTunes window opens. If the Audio CD wizard window opens, choose

Play Audio CD using iTunes from the list. You may have to scroll down

in the window to see iTunes.

•

If the iTunes window does not automatically open, click Start on the

taskbar, choose All Programs, click iTunes, and then click iTunes.

2 The music CD automatically begins to play.

Click the CD in the source list, and then click the Play button in the upper-left

corner of the iTunes window. To play a particular song, double-click the song

name (or track number).

NOTE: If you do not have an Internet connection, your CD is listed as Audio CD

on the source list and your song names are listed as track numbers.

For more information on using iTunes, click the Help menu in the iTunes menu bar.

For help on line, go to:

http://www.hp.com/music/

Playing CDs and DVDs

Playing CDs and DVDs with

Windows Media Player

Your PC must have a DVD drive to play DVD movies.

1 Insert the music CD or DVD movie into the drive.

•

The Windows Media Player window opens. If the wizard window opens,

select Windows Media Player from the list. You may have to scroll

down in the window to see Windows Media Player.

•

If the Windows Media Player window does not automatically open, click

Start on the taskbar, choose All Programs, and then click Windows

Media Player.

2 To play the CD or DVD, use the playback buttons in the Windows Media Player

window. To play a particular track, double-click the title (or track number) in the

Playlist. You can also control playback by using the media control buttons on

the keyboard (select models).

For more information on using Windows Media Player, click the Help menu in

the Windows Media Player menu bar. If necessary, first display the menu bar by

clicking the up arrow icon in the upper-left corner of the Windows Media Player

window.

Playing DVD Movies with

InterVideo WinDVD

The InterVideo WinDVD program uses a DVD drive (select models only) to play DVD

movies.

NOTE: Most DVD movies are localized to geographical countries/regions. See

“Using country/region codes” on page 40.

1 Insert a DVD disc into the DVD drive.

NOTE: On a double-sided DVD, read the text around the inner hole of the

disc to determine which side (A versus B or Standard versus Widescreen) to

play. Place the disc in the tray with the label facing up for the side you want

to play.

Getting Started Guide

2 Close the disc tray by gently pushing the tray into the PC.

The movie plays in its own resizable video window, and the WinDVD control

panel appears. If the Play DVD movie wizard window opens, select Play DVD

movie using InterVideo WinDVD from the list. You may have to scroll

down in the window to see it.

If the program does not automatically open:

Click Start, choose All Programs, choose InterVideo WinDVD, select

InterVideo WinDVD Player, and then click InterVideo WinDVD.

Use the playback buttons on the control panel to view the movie.

NOTE: To see what a button does on the control panel, place the mouse pointer

on the button; the button title appears onscreen.

NOTE: If you are playing a movie full screen and the WinDVD control panel is

hidden, you can redisplay it by clicking anywhere in the video window.

To use the WinDVD control panel:

• To move the WinDVD control panel, place the mouse pointer on the panel (but

not on a button), and drag it to the desired location on the screen.

• To resize the video window when it is not full screen, place the mouse pointer

on a window corner and drag the border.

Click the Full Screen button in the upper-right corner of the WinDVD

control panel.

• For information on the InterVideo WinDVD software, refer to the online

Help within the program by clicking the ? (question mark) icon in the WinDVD

control panel.

Playing CDs and DVDs

Using country/region codes

Most DVD discs have country/region codes embedded in the disc data that limit

where the DVD movie can be played.

The country/region number is usually placed over a world globe printed on the

DVD packaging and disc. DVDs without country/region codes play on any player

or drive in any country/region.

WARNING: You can change countries/regions only five times before

the country/region code locks and becomes permanent. Once the

code locks, you can play DVDs from that country/region only. If the

country/region code locks, and you need help, contact Support.

WinDVD is not preset to a particular country/region — the country/region code of

the first DVD movie you play determines your DVD country/region.

For example, if you play a DVD with a country/region 1 code, WinDVD sets the

current country/region of your DVD player to 1. If you later play a DVD that is

coded for a different country/region, WinDVD asks if you want to set this as the

current country/region.

Playing Video CDs (VCD) with

InterVideo WinDVD

1 Insert your video CD (VCD) into a DVD or CD drive.

2 Select Play DVD movie using InterVideo WinDVD, and click OK.

If the program doesn’t open, click Start, choose All Programs, choose

InterVideo WinDVD, select InterVideo WinDVD Player, and then click

InterVideo WinDVD.

3 If you have a dual-language VCD, the sound of one language comes

out of the left speaker and the other language comes out of the right

speaker. Double-click the Volume icon on the taskbar.

4 Under Volume Control Balance, move the slider bar all the way to the right

or to the left, depending on which language you want to hear.

5 Close the Volume Control window.

Getting Started Guide

Playing Video CDs (VCD) with

Windows Media Player 9

1 Insert your video CD (VCD) into a DVD or CD drive.

2 Select Play DVD movie using Windows Media Player, and click OK.

If the program doesn’t open, click Start, choose All Programs, and

Windows Media Player.

3 Click File on the menu bar at the top, and click Open. (If you do not see the

menu bar, click the small circle with the up/down arrows in the upper-left corner

of the window.)

4 Click the Look In drop-down arrow and select the drive that has the Video CD.

5 Double-click the MPEGAV folder.

6 Select Any File (*.*) from the Files of type drop-down list.

7 Select the file, and click Open.

8 If you have a dual-language VCD, the sound of one language comes out of the

left speaker and the other language comes out of the right speaker. Click View

on the menu bar, choose Enhancements, and select Graphic Equalizer.

9 Move the Balance slider bar all the way to the left or to the right, depending

on which language you want to hear.

10 Close the Graphic Equalizer window.

Playing CDs and DVDs

Getting Started Guide

Creating CDs and DVDs

NOTE: Burn is an industry term used to describe the recording of information onto a

DVD or CD. Optical recording uses a laser beam to place information onto the disc,

thus the term burning.

NOTE: If your recording fails, manually select a slower recording speed (if

available) each time you make a recording. Refer to the Help menu in your selected

software program or your troubleshooting documentation for more information

about selecting a slower recording speed.

NOTE: HP supports lawful use of technology and does not endorse or encourage the

use of its products for purposes other than those permitted by copyright law.

If your PC has a CD-RW or DVD Writer (select models only), your PC has recording

software and you can make your own music or data CDs.

Your PC has four recording software programs: iTunes, Windows Media Player,

RecordNow!, and Windows XP. You copy or download music to their libraries and

can then organize or copy the music files. You can copy Windows Media files that

have a .wma extension, .mp3 files, or .wav files to a CD by using a CD Writer or

DVD Writer drive. You can also use iTunes or Windows Media Player to copy music

files to a portable device or memory card.

Use a CD-R disc if you are going to play the disc in a CD player, CD-ROM, CD-RW,

DVD-ROM, or DVD+RW/+R, DVD-RW/-R, or double-layer DVD+R drive. CD-R discs

are compatible with more players than CD-RW discs.

Creating CDs and DVDs

Using the Software Quick Reference

Table

To open the DVD Writer/CD Writer software programs, click Start on the taskbar,

choose All Programs, select the program folder, and then click the program to

open the software. Refer to the following table to determine the best programs for

the tasks you want to do.

NOTE: You may have a software update CD included with your PC. You may need

to install this CD before using the DVD Writer/CD Writer drive. To do this, follow the

installation instructions that came with the CD.

Your PC comes with the following software programs. Use this table to find out what

you can do within each program.

NOTE: Some programs listed below may not be included with your PC model.

Software

With this program you can

iTunes

• Play music CDs, MP3s, and other audio files.

• Record music files.

• Record a copy of an existing music or data CD to use on

the PC.

• Organize digital files into a library for recording or

listening.

Windows Media

Player

• Play music CDs, MP3s, and other audio files.

• Play DVD movies. (Windows Media Player can play

DVDs only if another DVD player program, such as

InterVideo WinDVD, is installed.)

• Play Windows Movie Maker files.

• Record music files.

• Organize digital files into a library for recording or

listening.

RealOne Player

• Play music CDs, MP3s, and other audio files.

• Play DVD movies. (RealOne Player can play DVDs only

if another DVD player program, such as InterVideo

WinDVD, is installed.)

• Play video CDs.

• Record music files.

• Organize digital files into a library for recording or

listening.

Getting Started Guide

Software

With this program you can

Windows

Movie Maker 2.0

• Import audio, video, and other media files from a

videotape, an audiotape, a Web camera, or a television

broadcast.

• Record audio and video files to create a video project

that becomes a Windows Media source file with a .wmv

extension.

• Edit and preview files.

• Send movie in an e-mail or to a Web server.

• Add music files (.mp3).

• Import audio files such as .mp3, .asf, or .wma; video

files such as .wmv, .asf, .avi, or .mpg; or image files

such as .jpg or .gif.

• Can create .avi and .wmv (Windows Media Video)

files.

InterVideo

WinDVD

• Play DVD movies and video CDs (VCD).

RecordNow!

• Record data and music files.

• Record a copy of an existing music or data CD to use on

the PC.

• Create customized music CDs from CDs in your

collection, or from .wav, .mp3, or .wma files. These CDs

can be played in your home or car stereo.

• Copy and share data files.

• Copy short video files.

NOTE: Video files recorded with RecordNow! can be

viewed on a PC, but not on home DVD video players.

Creating CDs and DVDs

Software

With this program you can

InterVideo

WinDVD Creator

• Capture digital and analog video files directly from a

digital video (DV) camera, VCR, or other analog capture

device.

NOTE: Your PC may not include an analog capture device.

• Assemble movies by capturing video clips and scenes

into a video project.

• Edit your movies. Cut scenes and add music and sound

effects, still images, text, video transitions, and voiceovers.

• Preview movies during editing and before recording

final files.

• Create video files, export them to your hard disk drive

or your digital video camera, and then play them on

your PC.

• Create video files, record them to DVDs and CDs, and

then play them on some set-top DVD players.

• Record video files to seven different formats.

muvee

autoProducer

• Capture digital video files directly from a digital video

(DV) camera.

• Assemble movies that include your video clips and

pictures.

• Add your favorite music to the background.

• Add captions to the beginning and end of your movie.

• Choose from a variety of styles to give your movie a

unique look.

Creating Music CDs with iTunes

To create a music CD using iTunes:

1 Click Start on the taskbar, choose All Programs, select iTunes, and then

click iTunes.

2 Click the Edit menu, and select Preferences.

3 Click the Burning tab, and choose Audio CD as the Disc Format.

4 Click the Use Sound Check check box if you would like all songs on the CD

to play at the same volume level, and click OK.

5 Click the File pull-down menu, and select New Playlist.

6 Enter a name for your new playlist, and an empty playlist window opens.

7 Drag and drop selected songs from your source to your new playlist.

8 Click the Burn Disc button in the upper-right corner.

Getting Started Guide

9 Insert a blank disc into your drive. Do not use a double-layer DVD+R disc, they

are not compatible with this program.

10 Click OK.

For more information on using iTunes, click the Help menu in the iTunes menu bar

or refer to your iPod Warranty and Support Guide.

Creating Music CDs with Windows

Media Player

1 Click Start on the taskbar, choose All Programs, and then click Windows

Media Player.

2 Click Copy to CD or Device.

3 Click the drop-down arrow in the Items to Copy field, and select the songs

you want to burn to a CD.

If there are not any songs listed, insert a CD into your drive, and click Copy

from CD. Follow the onscreen instructions.

4 Click the Copy button in the upper-right corner.

For more information on using Windows Media Player, click the Help menu in the

Windows Media Player menu bar. If necessary, first display the menu bar by

clicking the Up arrow icon in the upper-left corner of the Windows Media Player

window.

Creating Data CDs Using Windows XP

Your PC has recording software to record data files, such as text files or digital

pictures, onto CDs.

1 Click Start on the taskbar, and choose My Documents or the folder that has

the files you want to copy.

2 Select the file or files you want to copy.

3 Click Copy to CD in the Tasks list.

4 Click My Computer in the Other Places list, and then double-click the disc

drive you want to use.

5 Insert a blank disc into the drive.

6 Click Write these files to CD in the CD Writing Tasks list. The CD Writing

Wizard window appears.

7 Click Next.

8 Click Finish.

Creating CDs and DVDs

Creating CDs with RecordNow!

NOTE: For more information about recording CDs, refer to the Help menu in the

RecordNow! software program.

NOTE: The CD-RW, DVD Writer, or Double-Layer drive is available on select

models only.

1 Click Start on the taskbar.

2 Choose All Programs.

3 Click Sonic RecordNow!, and then click RecordNow! again.

4 If you need to erase a disc (CD-RW, DVD+RW, or DVD-RW): Insert the disc, and

select the Home Screen Tab, and then select Erase Disc.

Creating Music CDs with RecordNow!

RecordNow! creates closed session music CDs, which means you must record all

music files on one CD in one recording session. Music files can be recorded

repeatedly on a rewritable CD-RW disc, but all previously recorded files must be

erased first. CD-R discs cannot be erased.

NOTE: CD-R discs play in most home and car stereos. CD-RW discs play only in

some stereos.

IMPORTANT: HP supports the lawful use of technology and does not endorse or

encourage the use of its products for purposes other than those permitted by

Tips

You can use RecordNow! to create audio CDs to play in your car, on your home CD

player, or on your PC.

When recording music files, it is important to note that:

• To play your music CD in a home or car stereo, it needs to be recorded as a

music CD in CD Audio (CDA) format, not as a data CD.

• You must record all music files in one recording session because RecordNow!

closes the CD after recording is complete. Music files can be recorded

repeatedly onto a rewritable (CD-RW) disc, but all previously recorded music

files must be erased first.

Getting Started Guide

• As you add music files in the recording session, RecordNow! calculates and

displays the amount of recording time available to record additional music files.

• You can’t record song titles unless you make an exact copy of a music CD in

your collection.

• If you try to record more than a standard CD can hold, RecordNow! displays a

message warning you that all the tracks may not fit on your disc.

Creating CDs to Play in Your Car or

Home CD Players with RecordNow!

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Audio Projects tab.

3 Select Audio CD for Car or Home CD Player.

4 Insert a music CD to view the tracks on your CD. Select View if you would like

to look at another optical drive.

Click Find, and then click either Scan for Music or Browse to find music

files on your hard disk drive that you want to record.

5 Select the tracks you want to record, and then click Add.

NOTE: Press and hold Ctrl on your keyboard to select more than one track.

6 Click the Burn icon when you have added all the audio files to your

music CD project.

7 Click Yes.

8 When prompted, insert a blank CD-R or CD-RW disc.

9 Click OK. It is best not to use the PC while recording.

10 Click Done when recording is complete.

Click the Help icon, and then select RecordNow! Help for more information

about recording music CDs with the RecordNow! program.

Creating CDs and DVDs

Creating CDs to Play on Your PC

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Click the Audio Projects tab.

3 Select Jukebox CD.

4 Insert a music CD to view the tracks on your CD.

Click Find, and then click either Scan for Music or Browse to find music

files on your hard disk drive that you want to record.

NOTE: RecordNow! scans for all audio files, even the sounds from your

operating system. If you don’t want to display some of these sounds,

you can select the Options icon (wrench), and then select Audio.

Select Hide audio files shorter than (in seconds), type the

number of seconds, and click OK.

5 Select the tracks you want to record, and then click Add.

NOTE: Press and hold the Ctrl key to select more than one track.

6 Click the Burn icon when you have added all the audio files to your

music CD project.

7 Click Yes.

8 When prompted, insert a blank CD-R or CD-RW disc. If the CD-RW disc is not

blank, RecordNow! prompts you to erase it and then automatically begins

writing to it when it is erased.

NOTE: If you want to play your music CD in your home or car stereo, use a

CD-R disc. CD-RW discs may not play in some stereos.

9 Click OK. It is best not to use the PC while recording.

10 Click Done when recording is complete.

Click the Help icon, and then select RecordNow! Help for more information

about recording music CDs with the RecordNow! program.

Getting Started Guide

Storing Files on a DVD or CD

Unlike music CDs, data DVDs and CDs can be recorded in multiple sessions.

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Data Projects tab.

3 Insert a blank or appendable CD-R, CD-RW, DVD+R, DVD+RW,

DVD-R, DVD-RW, or Double-Layer DVD+R (select models) disc into

your drive, and then click Data Disc.

•

If the disc is blank, follow the onscreen instructions.

•

If the disc is full, insert a blank or another appendable disc.

•

If you are adding files to a disc, follow the onscreen instructions.

NOTE: An appendable disc means additional files can be added to it, if there is

disc space available. Recorded audio CDs are closed session discs, which are

not appendable.

4 To name your disc, select Volume Label, and then type a name over it.

RecordNow! assigns a name based on the recording date if you don’t type

a name.

5 Add your data files to the file selection window:

•

Click the Add Files and Folders button, find and select your folders and

files, and then click Add. Repeat this step until all files are added.

Creating CDs and DVDs

•

Drag your file from your desktop or from anywhere in Windows Explorer

into the file selection window. Repeat this step until all files are added.

NOTE: You can rename your files in the file selection window by selecting and

typing over the current name. This does not affect the original files on your hard

disk drive.

6 Click the Burn icon when all of your files have been added.

7 Click Done when recording is complete.

Click the Help icon, and then click RecordNow! Help for more

information about recording data files with the RecordNow! program.

Storing Data Files on Disc

When storing data files on a disc, it is important to note that:

• You can add new data files to a CD-R, DVD+R, and a DVD-R in a later

recording session, until the disc is full. With DVD+R and DVD-R discs,

you need to select the correct setting in RecordNow! to record files in

a later session. To do this, insert your recorded DVD, open

RecordNow!, click the Options icon (wrench), click Data, select the

recording option you want, and then click OK.

• When you record files that have the same name as previously recorded

files, RecordNow! updates the file and the previous version is overwritten.

• RecordNow! allows you to change file names and titles of files you want to

record and names of files that were previously recorded.

• As you select data files to record to your disc, RecordNow! calculates and

displays the amount of recording space used on your disc.

Copying a DVD or CD

IMPORTANT: HP supports the lawful use of technology and does not endorse or

encourage the use of our products for purposes other than those permitted by

RecordNow! allows you to make a copy of a music or data disc from your

collection. You can’t copy commercial DVDs because they are protected by

To make a copy of a music or data disc from your collection:

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Data Projects tab.

3 Select Exact Copy.

4 Insert the CD or DVD you want to copy.

Getting Started Guide

5 Click the Copy icon.

6 Insert a blank DVD or CD into the drive, and then click OK.

7 Click Done when the recording is complete.

Erasing a DVD or CD

You can use RecordNow! to erase music, data, or video files from rewritable DVDs

and CDs, leaving almost all the disc space available for new recordings.

If you try to record a video or music file to a rewritable disc that has files on it, the

recording program prompts you to erase the disc first.

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Insert the DVD+RW, DVD-RW, or CD-RW you want to erase. If an Auto Play

window opens, click Cancel.

3 Select the Home Screen tab and then Erase Disc.

4 Click Yes to confirm that you want to erase the disc.

Removing Files in RecordNow!

When removing files in RecordNow!, it is important to note:

• When you remove a recorded file from a data DVD+R, DVD-R, or CD-R, the

disc space is lost and can’t be used for new recordings.

• You can’t remove music files from previously recorded music CDs, but you can

remove music files from the File Selection window in RecordNow! before you

record the files to your disc.

• If you delete files from the File Selection window in RecordNow! before the disc

is recorded, available disc space is not affected. If you remove a file from a

DVD+R, DVD-R, or CD-R after the disc is recorded, available disc space is lost.

Removing Files from a Recorded

Data Disc

RecordNow! can’t erase files from recordable (record once) DVDs or CDs, but files

that have been previously recorded can be removed. When you remove a recorded

file from a data DVD+R, DVD-R, or CD-R, the disc space is lost and can’t be used for

new recordings.

Creating CDs and DVDs

To remove data files from a recorded DVD or CD:

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Data Projects tab.

3 Insert the disc from which you want to remove files. If an Auto Play

window opens, click Cancel.

4 Click Data Disc.

5 You must have at least one file on your data disc to re-record it. Select

the file you want to remove, and then click the Remove icon in the

upper-right corner.

6 Click Yes.

7 Click the Burn icon to save your data disc without the files you

removed.

8 Click Done when the recording is complete.

Archiving Files on a DVD or CD

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Backup Projects tab.

3 Select File Archive.

4 Insert a blank CD or DVD into the drive.

5 Place a check mark in the Changed since box to limit the scan to files that

have been changed since the last time you completed a File Archive.

6 Add your files to the Archive window:

•

Select one or more categories from the list on the left, and click Scan.

RecordNow! scans your hard disk for files related to the category and

moves them to the Archive window on the right.

•

Drag files from the Windows Explorer to the Archive window.

7 Click the Burn icon when all of your files have been added.

If the files do not fit on one disc, File Archive asks you for

additional discs.

8 Click Done when recording is complete.

Creating an Image File

RecordNow! can take all the files from a CD or DVD and convert them into a single

file called an image file. You can use the image file to reproduce the original disc.

This is often used when you need to make multiple copies of the same disc.

Getting Started Guide

Saving an Image

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Backup Projects tab.

3 Select Save Image.

4 Insert the source disc into the drive.

5 Click Browse to set the destination and name of the image file.

6 Click the Save icon to create the image file.

Burning an Image

1 Click Start, choose All Programs, Sonic RecordNow!, and then click

RecordNow!.

2 Select the Backup Projects tab.

3 Select Burn Image.

4 Click the Browse button to locate your saved image file.

5 Click the Burn icon.

6 Insert a blank recordable CD or DVD into the drive.

7 Click Done when recording is complete.

Recording Video Files

Video quality depends on the quality of the source files, the PC speed, and its

graphics processing ability. Refer to the “Recording VHS analog video direct to DVD

(select models only)” section of this guide.

NOTE: Your DVD Writer or CD Writer drive will not copy commercially available

DVD movies. Most commercial DVDs are encoded to prevent unauthorized

duplication.

Using Disc Labels

WARNING: When labeling your DVDs, do not use sticky labels. They

can cause the DVD to play erratically. Instead, write on the DVD with

a felt-tip pen to label it.

Creating CDs and DVDs

Disc Labeling with LightScribe

LightScribe (select models only) is a direct disc labeling technology providing you a

simple way to burn precise, silk-screen quality labels. It combines the CD or DVD

drive of your PC with specially coated discs (sold separately) and enhanced disclabeling software.

A LightScribe-enabled CD or DVD disc drive uses the optical laser in the drive to

burn a label onto a thin dye coating on the label side of the disc. There is no ink to

smear or paper to curl, and there are no adhesives to loosen.

LightScribe media is identified by the LightScribe logo on the retail packaging and

on the inner hub area of the disc itself. Your PC comes ready to work with many

versions of LightScribe media; however, as new media versions are introduced you

will need to update the driver software for your LightScribe-enabled CD or DVD

drive. Get driver updates from the HP Support Web site.

Lightscribe requirements

Burning a label with LightScribe requires three things:

• LightScribe-enabled DVD drive

• LightScribe software

• LightScribe discs (sold separately)

Burning a label on a LightScribe media disc

You can burn the label before or after you burn the disc with data, music, or picture

files. Labels can be a simple title and contents list or you can get more creative by

adding backgrounds and images.

You can design and burn the label with InterVideo Disc Label or Sonic Express

Labeler.

1 Click Start, All Programs, InterVideo DiscLabel, and then click

InterVideo DiscLabel again.

2 Select a template style from the Template menu, and click Apply.

3 Double-click the title text box, if present, or click Add Text.

4 Type the text into the Rich Text Edit window, and then click OK.

5 With the text box selected (click the box once), use the Text toolbar to modify

the font, color, and other text properties.

6 Double-click the list text box, if present, or click Add List to add a list of

contents to the label.

7 Click Add to add a row to the list.

8 Move the cursor over a list row item (Title, Artist, Length), and double-click to

edit the item.

9 Click OK when you are finished with the list.

Getting Started Guide

10 Click Edit Background, and then click Change Background to add a

background image to the label.

11 Follow the onscreen instructions to browse to and select an image file.

InterVideo Disc Label supports .jpg, .bmp, and .png image files.

NOTE: LightScribe creates a grayscale (monochrome) image similar to a black

and white photograph.

12 Click Add Image and follow the onscreen instructions to browse to and select

an image file. InterVideo Disc Label supports .jpg, .bmp, and .png image files.

13 Click and drag the image to the area you want it to appear on the label. You

can resize the image by clicking and dragging the sides or corners of the

image.

NOTE: To remove an image from the label, click the image, and then press

Delete on your keyboard.

14 When you are satisfied with the appearance of your label design, click

LightScribe Print. Click Print, insert the LightScribe media (label side down)

in the disc tray, and then click OK.

To burn a label with Sonic Express Labeler:

1 Click Start, All Programs, Sonic RecordNow!, and then click Express

Labeler.

NOTE: You can open the Express Labeler from within RecordNow! by clicking

Label Disc.

2 Select the Project area and make sure that Disc Label is selected.

3 Click Text, and then enter text for the Title and Subtitle.

4 For each line of content description, click New and enter text for the

information you want to include, and then click OK.

5 Select a label template by clicking Layout and choosing a layout.

6 Select a background, if desired, by clicking Background. Select one of the

provided backgrounds, or click More to find one of your own images to use as

a background.

NOTE: LightScribe creates a grayscale (monochrome) image similar to a black

and white photograph.

7 When you are satisfied with the appearance of your label, insert the

LightScribe media disc (label side down) into the disc drive tray, and then click

Print.

8 From the Disc Label menu, select LightScribe 12cm Disc.

9 Select a Contrast Level, and then click OK to begin burning the label.

Creating CDs and DVDs

Creating a LightScribe label after burning a disc

with iTunes

iTunes works with Sonic Express Labeler to allow you to burn labels on a data CD or

audio CD. The playlist you create in iTunes to burn a disc is automatically imported

into Express Labeler so that this information is available for you to use on your

LightScribe label. To use Express Labeler from iTunes, the data or music tracks in the

playlist you are using must fit on a single CD.

1 Click Start, All Programs, iTunes, and then click iTunes again.

2 Burn a data or audio CD with iTunes. When the burning process is complete,

click Yes on the Create LightScribe Label window.

3 In the Step 1: Select Project area, make sure that Disc Label is selected.

4 Select a label template by clicking Layout and choosing a layout. The various

layouts show different amounts of playlist information. Some show only the

playlist title and others show the playlist title and track names. You can edit

playlist information by clicking Text to open the Edit Text window.

5 Select a background, if desired, by clicking Background. Select one of the

provided backgrounds or click More to find one of your own images to use as

a background.

NOTE: LightScribe creates a grayscale (monochrome) image similar to a black

and white photograph.

6 When you are satisfied with the appearance of your label design, insert the

LightScribe disc (label side down) into the disc drive tray and then click Print.

7 From the Disc Label menu, select LightScribe 12cm Disc.

8 Select a Contrast Level and then click OK to begin burning the label.

The estimated time to complete the label displays, along with a progress bar to

show you the time remaining. You can continue to work on your PC while

LightScribe is burning the label.

Setting Automatic Recording Options

When you first insert a blank CD into your DVD Writer or CD Writer drive, you may

see options for the type of disc you insert.

NOTE: When you insert a blank DVD into your DVD Writer/CD Writer drive, an

options window does not appear. You must open the program you want to use with

your DVD, and then perform an action.

Getting Started Guide

For example, if you insert a blank CD-RW disc, you see options such as:

• Open writable CD folder using Windows Explorer.

• Create a disc using RecordNow!.

• Take no action.

The options displayed depend on what software is on the PC.

You can choose to have a specific action occur automatically each time you insert a

blank CD by selecting the Always do the selected action check box.

If you later decide that you want to change the option you have set:

1 Click Start.

2 Click My Computer.

3 Right-click the DVD Writer or CD Writer drive icon (may be labeled

DVD/CD-RW), and select Properties.

4 Click the AutoPlay tab.

5 Click Select an action to perform, select an action, and then click OK.

Click Prompt me each time to choose an action, and then click OK.

If this window of options does not appear, you can click Start, My Computer,

right-click the DVD Writer or CD Writer drive icon (may be labeled

DVD/CD-RW), and then select one of the available options.

You can also open a program before you insert a disc. After the program is opened,

select an action and follow the onscreen instructions within the program.

If the option you want is not listed, you can select Take no action, and then click

OK. The window closes, and you can then manually select a different option

through the Start menu on the desktop.

Creating CDs and DVDs

Here are some of the other options you can choose to view the files on the disc you

inserted:

• Click Start, My Computer, and then right-click the DVD Writer/

CD Writer drive icon and choose Explore.

• Click Start, My Computer, and then double-click the DVD Writer/

CD Writer drive icon.

Using Compatibility Information

An important feature of a DVD Writer/CD Writer drive is its high level of

compatibility with other optical drives and CD and DVD players.

• The CDs that you create play in most home and car stereos and in most

computer DVD-ROM and CD-ROM drives.

NOTE: CD-R discs are compatible with more home and car stereos than

CD-RW discs.

• The DVDs that you create are compatible with some DVD video players and

with most computer DVD-ROM drives.

Your DVD Writer/CD Writer drive is able to read from and record to almost every

type of optical disc. Writing speed rates for the DVD Writer/CD Writer drive allow

quick recording times.

Identifying Compatible File Formats

Your DVD Writer/CD Writer drive can read and record the following audio formats:

• WAV, MP3, WMA, and CDA for CDs

• WAV, MPEG-1, MPEG-2, WMA, and Layer 2 files for DVDs

Your DVD Writer/CD Writer drive can read and record the following video formats:

• MPEG-1 and MPEG-2

• AVI and WMV

Getting Started Guide

Using the Disc Quick Reference Tables

You can use DVD+RW, DVD+R, DVD-R (select models only), DVD-RW (select models

only), double-layer DVD+R, CD-RW, and CD-R discs in the DVD Writer/CD Writer

drive.

NOTE: Some PCs come with the Double-Layer DVD-Writer drive support single-layer

and double-layer DVD media. Double-Layer technology gives you greater capacity

and allows you to store up to 8.5GB* of data on double-layer DVD+R media.

Double-layer is a new technology. The double-layer media created may not work

with some home DVD players and computer DVD-ROM drives.

*GB is defined as 1 billion bytes.

For the latest disc compatibility information for your PC, check the following Web

site: http://www.hp.com

Using double-layer DVD+R discs

• Can only be written to with a Double-Layer DVD-Writer drive (select

models only).

• Can’t be erased or written to again.

• Hold up to 8.5GB — the equivalent of 12 CDs.

• Record up to 4 hours of video files, depending on the quality of the recording.

• Can be used to back up your hard disk drive files.

Using DVD+R and DVD-R discs

• Can’t be erased or written to again. Some programs, like RecordNow!, allow

you to record data in multiple sessions until the disc is full.

• Can’t edit a DVD+R or DVD-R that has been recorded as a DVD movie.

• Hold up to 4.7GB — the equivalent of seven CDs.

• Record up to 2 hours of video files, depending on the quality of the recording.

• Compatible with more DVD drives and players than a DVD+RW or

DVD-RW disc.

• Can be used to back up your hard disk drive files.

Using DVD+RW and DVD-RW discs

• Can be erased and rewritten.

• Can hold up to 4.7GB — equivalent of seven CDs.

• Record up to 2 hours of video files, depending on the quality of the recording.

• Can be used to back up hard disk drive files that you can update periodically.

Creating CDs and DVDs

Using CD-R discs

• Can’t be erased or written to again. Some programs, like RecordNow!, allow

you to record data in multiple sessions until the disc is full.

• Can hold up to 80 minutes of music files, or up to 99 tracks.

• Can hold up to 700MB of data, depending on the CD.

• Can be used to create storage discs for your hard disk drive files.

Using CD-RW discs

• Can be erased or rewritten.

• Can hold up to 80 minutes of music files, or up to 99 tracks.

• Can hold up to 700MB of data, depending on the CD.

• Can be used to create storage discs for your hard disk drive files.

Video recording length

Disc type

Video quality setting

Good

Better

Best

8.5GB Double-Layer

DVD+R

325 minutes

217 minutes

108 minutes

4.7GB DVD+RW,

DVD+R, DVD–RW,

DVD-R

180 minutes

120 minutes

60 minutes

700MB CD-RW, CD-R

27 minutes

18 minutes

9 minutes

650MB CD-RW, CD-R

24 minutes

16 minutes

8 minutes

NOTE: CD-R discs are compatible with more home and car stereos than

CD-RW discs.

Getting Started Guide

Disc feature and compatibility

Disc

File type

Can be

recorded

onto

Plays

in PC

Plays in

home or

car stereo

Plays in

home

DVD

player

CD-ROM

Data

Yes

Music

Yes

Varies by

player

Data

Yes

MP3 Music

Yes

Varies by

player

Varies by

player

Data

Yes

MP3 Music

Yes

Varies by

player

Varies by

player

Data

Yes

DVD movie

Yes

DVD+R

and

DVD-R

Data

Yes

DVD movie

Yes

Varies by

player

DoubleLayer

DVD+R

Data

Yes

Varies by

player

Varies by

player

DVD movie

Yes

Varies by

player

Varies by

player

DVD+RW

and

DVD-RW

Data

Yes

DVD movie

Yes

Varies by

player

VCD

DVD movie

Yes

Varies by

player

CD-R

CD-RW

DVD-ROM

Creating CDs and DVDs

Optical drive quick reference

Optical

drive can

Read CDs,

CD-Rs, and

CD-RWs

Read

DVDs

Read data

on a CD

Play music

Record

data or

music to

disc for

storage or

backup

View DVD

movies

Record

DVD

movies

Play PC

games

Getting Started Guide

CDROM

CDRW

DVDROM

DVD+RW/+R

DVD-RW/–R

DoubleLayer

Combo

CD-RW/

DVD

Creating Movies Using WinDVD Creator

WinDVD Creator allows you to capture (copy), edit, and record your home movies

in four easy steps by using the InterVideo WinDVD Creator software program (select

models only).

Capture: Take videos and pictures from digital camcorders, analog video devices,

and Webcams, and then save them to your hard disk drive.

Edit: Arrange and trim your files. Add titles, transition effects, images, and audio.

Add menu: Add a menu with chapters to your DVD.

Make Movie: Finalize your project by burning your movie to a DVD.

For more information on WinDVD Creator, click the Help menu in the

WinDVD Creator menu bar.

Getting started

1 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

2 Select one of the menu options:

•

Start New Project: Opens the Edit section for you to begin creating a

new project.

•

Open existing project: Opens the Open window for you to select an

existing project.

•

Archive Video to DVD: Opens a wizard for you to bypass the hard disk

drive and record directly from your camera to a recordable DVD or CD.

•

Edit Existing Video File: Opens the Import Media Files window for you

to select an existing video clip.

•

Record to Video File: Opens the Capture section for you to capture

media.

•

CD Labeling: Opens the InterVideo Disc Label program for you to design

and create your own disc labels.

Creating Movies Using WinDVD Creator

Using the Preview window

The Preview window is located in the upper-left corner. It behaves differently for

each task.

Capture: Displays what your capture device is viewing.

Edit: Plays back the selected video or displays the selected image.

Add Menu: Displays what your menu and buttons look like.

Using the Media Library

The Media Library contains your video clips, images, and audio tracks. To import

existing media files from your hard disk or CDs into your Media Library, click the

Drag and Drop button.

Capture: Located in bottom-right corner. Contains your video clips, images, and

audio tracks.

Edit: Located in upper-right corner. Contains your video clips, images, and audio

tracks.

Add Menu: Located in upper-right corner. Contains menu themes, video

backgrounds, audio tracks, images, buttons, chapter layouts, and chapter

thumbnails.

Using the Storyboard

The Storyboard is located on the bottom of the Edit and Add Menu area. The

Storyboard can be displayed in either Menu Picker or Timeline mode. Use the

Storyboard to organize your media and add special effects such as titles, transition

effects, audio tracks, and video filters.

Identifying requirements for capturing video

You can copy (capture) video files to your hard disk drive by using the

WinDVD Creator program. Among the devices supported by WinDVD Creator are

analog video devices, digital camcorders, and Web cameras. Use your composite

or S-video inputs to capture video from a VCR, or an analog video camera.

To capture video files, you need to:

• Connect your video source device properly.

• Turn your device on and set it to playback mode.

• Make sure the program you want to use can detect your digital or analog

device. In the WinDVD Creator capture screen, click your input source, click the

Wrench icon, select the Device Control tab, and select your source from the

Video Source drop-down menu.

Getting Started Guide

NOTE: You may need to turn your device off and on again for the program to

detect it.

If your PC has multiple video devices connected, they all appear on the Capture

screen. Select the video source you would like to use.

Capturing digital camcorder video

1 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

2 Click the Record to video file button.

3 Connect your digital camcorder to your PC.

4 Make sure the output from your digital camcorder appears in the Preview

window. If it does not, double-check your connections and make sure your

camera is in playback mode.

5 Click the Play button to preview your video file before you record it.

6 Find your starting point in the video, and click the Pause button.

7 Click the Record button.

8 Enter a file name, click Save, and recording begins.

9 Click the Stop button to stop capturing your video file. Your video file is

processed and automatically saved to the My Videos folder on your hard disk

drive. The video clip appears in the Media Library portion of the screen.

10 To play back your captured video, click the file in the Media Library, and click

the Play button in the Preview window.

Capturing Web camera video

1 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

2 Click the Record to Video File button.

3 Connect your Web camera to your PC.

4 Make sure the output from your Web camera appears in the Preview window.

If it does not, double-check your connections.

5 Click the Record button.

6 Enter a file name, click Save, and recording begins.

7 Click the Stop button to stop capturing your video file. Your video file is

processed and automatically saved to the My Videos folder on your hard disk

drive. The video clip appears in the Media Library portion of the screen.

8 To play back your captured video, click the file in the Media Library, and click

the Play button in the Preview window.

Creating Movies Using WinDVD Creator

Capturing analog video

1 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

2 Click the Record to Video File button.

3 Connect your VCR, television, or other input device to your composite or

S-video inputs.

4 Click your input source, click the Wrench icon, and select the Device

Control tab.

5 Select your composite or S-video source in the Video Source drop-down menu.

Click OK.

6 Click the Record button.

7 Enter a file name, click Save, and recording begins.

8 Click the Stop button to stop capturing your video file. Your video file is

processed and automatically saved to the My Videos folder on your hard disk

drive. The video clip appears in the Media Library portion of the screen.

9 To play back your captured video, click the file in the Media Library and click

the Play button in the Preview window.

Capturing a still image

1 Pause your input device on the position for which you would like an image.

2 Click the Capture Still Image button under the Preview window.

3 The image is saved to the My Pictures folder on your hard disk drive.

Editing video files in WinDVD Creator

After you capture video files, use the WinDVD Creator Edit module to create your

customized video file. In Edit mode you can add:

• Video files

• Still images

• Audio and music tracks

• Transition effects

• Title effects

• Video filters

To edit your video files:

1 If your project is already open, click the Edit button, and skip to step 4.

2 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

3 Open a project by selecting either the Start New Project or the Open

Existing Project button.

Getting Started Guide

4 If you have already captured video for this project, drag and drop the video

files from the Media Library to the Storyboard. If you have video files on your

hard disk drive you would like to add to this project, click the Drag and Drop

button.

5 If you do not like the sequence of the video files, drag and drop the files in the

Storyboard to change the sequence.

Adding images

1 Click the Image Library icon.

2 Click the Drag and Drop button to open the My Pictures folder on

your hard disk drive.

3 Select the images from your hard disk you would like to add to your Image

Library, and click Open.

4 Drag and drop images from the Image Library to your Storyboard.

Click the following icons to edit still images and video files:

Storyboard icons

Group

Groups multiple images into one on the Storyboard.

Expand

Expands grouped images so they are all displayed on the

Storyboard.

Save Movie

Records output directly to a DV camcorder. Or writes

output to a file in your selected format.

Edit Clip

Trims a video clip:

1 Double-click a video clip on the Storyboard.

2 Adjust the sliders to cut off video at the beginning or

the end.

Merge Clip

Merges a clip with the next clip.

Split Clip

Splits a video clip:

1 Click the video clip you want to split.

2 Click the Play button in the Preview window.

3 Click the Split Clip icon at the point of the clip you

want split.

Adding audio effects

1 Click the Audio Library icon.

2 Click the Drag and Drop button to open the My Music folder on your

hard disk drive.

Creating Movies Using WinDVD Creator

3 Select the audio files from your hard disk you want to add to your audio library,

and click Open.

4 Drag and drop the audio files from the Audio Library to the video file of your

choice.

5 A musical note icon appears in the bottom right corner of the video file to which

the audio track was assigned.

6 To keep the audio track running for more than one video file, switch from

Storyboard mode to Timeline mode. Drag the music track across more than one

video file.

Adding transition effects

1 Click the Transition Effects icon.

2 Drag and drop a transition effect between the two video files you

would like the effect to appear.

Adding title effects

1 Click the Title Effects icon.

2 Drag and drop a title effect either in between video files or to a video

file on the Storyboard.

3 Type the text you would like to appear on your title screen.

4 If you inserted the title effect in between video clips, click on the Image

Setting icon to adjust the length of time you want the title clip to appear.

A capital T appears in the bottom-right corner of the title clip on the Storyboard.

Adding video filters

1 Click the Video Filters icon.

2 Drag and drop a video filter to the video of your choice.

Adding a menu

The Add Menu section turns your project interactive. It creates a menu theme and

breaks your project into chapters. The menu theme can be your own images and

music or a custom theme that comes with WinDVD Creator.

1 If your project is already open, click the Add Menu button.

2 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

Getting Started Guide

3 Select the Open existing project button, and select your project.

4 Click the Add Menu button.

5 Click the Media Library icons to add a menu theme, chapters, buttons, audio

tracks, and images to your DVD.

6 Click the Storyboard icons to edit the chapters and menu items.

Making a movie

This is the final step of your DVD project. You select a format, the type of TV system,

and volume name.

1 If your project is already open, click the Make Movie button, and skip to

step 5.

2 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

3 Select the Open existing project button, and select your project.

4 Click the Make Movie button.

5 Insert a blank recordable DVD or CD into your drive.

6 Choose one from each of the following sections (order of selections may differ):

Select

To:

Burn to Disc

Select where you would like the file to be recorded:

• Burn to Disc: Use this to burn directly to a DVD or CD.

• Write content to hard disk for later burning: Use

this to create the file on your hard disk drive.

Select

Device

Select the device that contains the blank recordable DVD

or CD.

Burning

Speed

Select the speed to use when recording your project.

Format

Select one of the formats to record your project.

TV System

Select either NTSC or PAL for your TV system. The NTSC

format is used in North America, and the PAL format is used in

European and Asian countries/regions.

Volume

Name

of Disc

Enter a volume name for your disc (optional).

7 Click Start.

8 Click OK.

Creating Movies Using WinDVD Creator

Recording VHS analog video direct to DVD (select

models only)

To record VHS analog video direct to DVDs:

1 Connect your VCR or other analog video source to your composite or

S-video input.

2 Insert a blank recordable DVD or CD.

3 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

4 Select the Archive Video to DVD button, and follow the onscreen

instructions.

Converting recorded TV to MPEG-2 format

(Europe only)

1 If your project is already open, click the Edit button, and skip to step 4.

2 Click Start, choose All Programs, InterVideo WinDVD, InterVideo

WinDVD Creator, and then click InterVideo WinDVD Creator again.

3 Open a project by selecting either the Start New Project or the Open

Existing Project button.

4 Click the Save Movie icon, and select Output to File.

5 Select a GQ, HQ, SP, LP, or EP format, and click OK.

6 Enter a file name and click Save.

Getting Started Guide

Getting Help

Finding Onscreen Guides

The Documentation folder (select models only) in the All Programs menu contains

any onscreen guides included with your PC.

To see the items in the Documentation folder:

1 Click Start on the taskbar.

2 Choose All Programs.

3 Choose Documentation.

4 Click an item to view it or use it.

NOTE: If there are no guide titles listed in the folder, your PC has no onscreen

guides.

Finding Guides on the Web

You can find guides and information for your PC using the Internet to access a

Support Web site.

To view information for your PC, go to the Support Web address listed in the

Warranty and Support Guide, and search for your product name and number.

The product number is on the lower front of the PC chassis.

NOTE: Information and guides are associated with specific PC model numbers.

Some models do not have guides or manuals available on the Web site.

Getting Help

Using the Onscreen Help and Support

Center

Information about your PC is in the onscreen Help and Support Center (select

models only).

Here you can find links to driver updates, access to technical support

options, and information about commonly asked questions.

To open the Help and Support Center:

• Press the Help button (select models only) on your keyboard.

• Click Start on the taskbar, and choose Help and Support.

Using Instant Support

When you need assistance to solve a PC-related problem, use Instant Support (select

models only).

With Instant Support you can run tests or submit a problem for help

over the Internet. When you submit a problem, you communicate over the Internet

with a Support analyst who works with you on solving the problem.

To start Instant Support:

1 Click Start on the taskbar.

2 Click Help and Support.

3 Click Connect to Customer Support.

4 Click Start a New Request.

5 Follow the onscreen instructions to run a test or submit a problem. (Your PC must

be connected to the Internet to submit a request.)

Getting Started Guide

Using Compaq Connections

Compaq Connections (select models only) is an Internet-based service that brings

you important information for your PC:

• Product notices

• System updates

• Tips

• Special offers for your PC

Messages arrive while you’re connected to the Internet and may display an alert or

a notice on your desktop. View messages as they arrive or read them later.

Most Support updates delivered by Compaq Connections messages are also

available to you through the Support Web site under the information for your PC

model.

Getting messages

After you view or close a message, it will not automatically display again.

To read a previously received message, open Compaq Connections:

1 Click Start on the taskbar.

2 Choose All Programs.

3 Choose PC Help & Tools.

4 Choose Compaq Connections.

5 Click Compaq Connections again.

Compaq Connections opens and lists the message titles. To read a message,

double-click the message title in the window. You can close this window, and

Compaq Connections remains active.

Turning off messages

NOTE: You cannot receive Compaq Connections messages, including important

Support messages that may be critical to the operation of your PC, while the service

is off.

To turn off the Compaq Connections Service:

1 Click Start on the taskbar.

2 Choose All Programs.

3 Choose PC Help & Tools.

4 Choose Compaq Connections.

5 Click Disable Compaq Connections.

The service is turned off until you re-enable it.

Getting Help

Re-enabling messages

When you re-enable the Compaq Connections Service, the service runs whenever

you are connected to the Internet, and you automatically receive messages as they

become available.

To turn on the service:

Double-click the Re-enable Compaq Connections icon on the desktop.

1 Click Start on the taskbar.

2 Choose All Programs.

3 Choose PC Help & Tools.

4 Choose Compaq Connections.

5 Click Re-enable Compaq Connections.

Using PC Help & Tools

The PC Help & Tools folder (select models only) in the All Programs menu contains

special utilities for PC owners such as support information and programs.

To see the items in the PC Help & Tools folder:

1 Click Start on the taskbar.

2 Choose All Programs.

3 Choose PC Help & Tools.

4 Click an item to view it or use it.

Getting Started Guide

Index

adding a menu 70

adding images 69

antivirus, installing program 5

appendable disc 51

audio wizard 18

automatic recording options

setting 58

burning CDs 43

buttons

Compaq 7

customizing 9

E-Mail 8

Help 7

Mute 9

On 3

Power 3

Search 8

special keys 7

Standby 7

user 7

connecting

a TV 23

multi-channel speakers

3-connectors 12

multi-channel speakers

6-connectors 15

connectors

PC back 2

symbols on chassis 2

converting recorded TV 72

copying a DVD or CD 52

country/region codes 40

creating CDs 43

customizing keyboard buttons 9

cables, for connecting a TV 23

capturing

requirements 66

video and images 65

card reader, memory 19

carpal tunnel syndrome 1

chassis, symbols 2

Compaq Connections, using 75

Compaq keyboard button 7

Compaq Organize 6

components 3

desktop 6

digital picture 19, 35

disc

CD-R 62

CD-RW 62

compatible file formats 60

double-layer DVD+R 61

DVD+R 61

DVD+RW 61

DVD-R 61

DVD-RW 61

feature and compatibility 63

quick reference 60

disc and drive compatibility

information 60

disc labels 55

disconnecting TV 28

Documentation folder 73

double-layer DVD+R discs 61

double-sided DVD 38

Index

drive

HP Personal Media Drive 29, 32

DVD player, multi-channel audio 13

edit

video files 68

e-mail

keyboard button 8

equalizer

Sound Effect Manager

(6-connector) 17

erasing a DVD or CD 53

file formats 60

hard disk drive

connecting an HP Personal Media

Drive to the PC 30

Help

onscreen Help and Support 74

Help and Support 74

Help and Support Center 5

Help button 7

HP Personal Media Drive 29

activity and power lights 31

automatic on and off feature 30

disconnecting the drive 33

inserting a drive 30

location and drive letter 31

storing files 32

image files 54

adding 69

installing software programs 5

Internet

finding an ISP 4

keyboard button 8

organizing destinations 6

signing up with an ISP 4

iTunes 46

creating music CD 46

features 44

playing music CDs 37

Getting Started Guide

keyboard

customizing buttons 9

types of buttons 7

using 7

LightScribe 56

InterVideo DiscLabel 56

iTunes 58

requirements 56

Sonic Express Labeler 57

manuals, on the Web 73

memory card reader

card types 19

using 19

microphone

6-connector, using 17

using with multi-channel speakers 13

monitor 3

Multi-channel Sound Manager 12

multi-channel speakers 11

connecting 3-connectors 12

connecting 6-connectors 15

selecting for 3-connector PC 12

selecting for 6-connector PC 15

using a microphone 13

music

about burning a music CD 48

burning CD 46

playing with iTunes 37

playing with Windows Media

Player 38

music button 7

Mute button 9

online manuals 73

onscreen guides 73

optical drive quick reference 64

organizing Internet links and the PC 6

organizing information 6

running tests 74

setting it up 1

transferring files and settings to

new PC 5

turning on 3

viewing PC image on TV 24

PC Help & Tools 76

peripherals 3

Pictures (Photos) button 7

product notices 75

RealOne Player

features 44

recording VHS files direct to DVD 72

RecordNow! 48

copying a DVD or CD 52

creating music CDs 48

erasing a DVD or CD 53

features 45

image files 54

removing files 53

storing files on a DVD or CD 51

removing files 53

repetitive strain injury (RSI) 1

retasking

audio connectors 18

Safety & Comfort Guide 1

safety warnings 1

setting up PC 1

shortcut icons 6

software

installing 5

software quick reference 44

sound connectors 11

3-connectors PC 12

6-connectors PC 14

Sound Effect Manager 17

audio wizard 18

retasking connectors 18

sound manager, multi-channel,

3-connectors 12

sound manager, multi-channel,

6-connectors 17

speaker system 11

speakers 11

multi-channel 11

special offers 75

Standby button 7

storing files

about storing data files 52

Support

messages 75

symbols on chassis 2

system updates 75

television, viewing PC image on a TV 23

tips 75

transferring information to your new PC 5

turning on PC

first time 3

connecting 23

disconnecting 28

TV-out 23

cables 23

connecting a TV set 23

disabling TV option 26

viewing PC image on TV 24

updating, system 75

USB

connecting an HP Personal Media

Drive to the PC 29

User button 7

VCD

playing with Windows Media

Player 41

playing with WinDVD 40

VHS, recording to DVD 72

video button 7

Video CDs

playing with Windows Media

Player 41

playing with WinDVD 40

video files

recording 55

video recording length 62

viewing onscreen guides 73

volume

controls 9

Index

Web

guides 73

Windows Media Player

creating music CDs 47

features 44

play music CDs 38

playing video CDs 41

Windows Movie Maker 2.0

features 45

Windows XP

creating data CDs 47

WinDVD 13

control panel 39

features 45

playing DVD movies 38

playing video CDs 40

WinDVD Creator

adding a menu 70

adding audio effects 69

adding images 69

adding title effects 70

adding transition effects 70

capture 65

edit 65

editing video files 68

features 46

help 65

making movie 71

media library 66

preview window 66

recording VHS video files direct

to DVD 72

storyboard 66

wizard

audio for Sound Effect Manager 18

working in comfort 1

Part Number: 5991-1990

Getting Started Guide

Configuring sound for recording with the

Similar Papers