ZG autoclave for AAC is adopted Germany Technology,Made in China.we provide you technology support
1. introduction of aac manufacturers| aac plant autoclaved aerated concrete plant|aac plant autoclaved aerated concrete
plant DONGYUE :
Areated concrete block (light block ) is the light and porous buidling materi
al. It has light keeping temperature cant burn and other advantages.it can be
made into many kinds of bricks for example:600×200×100,80×80×180,240×1
15×53,600×200×125),they could be used industry building and common buil
ding.they are more and more popular in the world.in the future,they will repl
ace the clay brick completely.
Areated concrete common conception Common concrete density is
usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has
not the big grain,main use silicon material (for example:coal ash,sand,
stone dust and others ),through making the material small for example
sand,they can be used directly if has enough degree of small (for example
coal ash.Mixing calcium material lime cement water to a special slop,then
The Term Paper on Hzs60 Concrete Plant
When 17th century philosopher René Descartes said “I think, therefore I am,” he was describing the power of our thoughts and beliefs. Taken a step further, we can also say, “You are what you think.” Do you usually think, “I’m not good enough” or “I accept and like myself?” If you answered the former, then it’s time to replace those limiting beliefs. They get you nowhere at work. You are not alone. ...
add the aluminum dust and the additive.Make the aluminum dust and the
special slop have a Chemical reflect.then produce Hydrogen to make the
concrete slop to expanding or swell,foam.Next,put them into the curing
room to concreting cutting steaming curing,last,there will bacome the
light brick,the porous rate is 70-80%.
2.AAC plant advantages
(1)light weight
Aerated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5
common concrete.So use the Light brick can reduce the weight of the
build more,and also reduce the beam of roof and pillar press best.then
you can see,it can save the material and cost,it also fighting shaking.
(2) keeping temperature
It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or1/5 of clay brick,so it is best materials now
in the world.There are many kinds material,have lowest waste.
(3)High Strength
High pressure steam-curing autoclaving process gives AAC unmatchable strength to weight
ratio, higher than even M150 concrete and far exceeds the Indian Building
code requirements
3.General notice
1).
Customized color is available based on previous notice.
2).
The third party inspection is available.
3).
If needed, the seller can help the buyer to handle shipping and
insurance
4).
Marking and package shall be arranged according to applicable
international requirements.
5).
Guarantee: Our block machine has been taken under guarantee by
the seller from the date of commissioning within 12 months on the
premise of regular use of the buyer. An Acceptance Act will follow to
inspect the application of the equipment.
6).
Installation & commissioning is available based on the clients’
requirement.
http://www.waterfiretubeboiler.com/AAC-plant.html
