James Russell was born in Bremerton, Washington in 1931. His first invention, at six years old, was a remote-control battleship with a storage chamber for his lunch. In 1953, he earned his Bachelor of Arts in physics and graduated from Reed College in Portland. Afterwards he went to work as a Physicist in General Electrics nearby labs in Richland, Washington. There he started many experimental instrumentation projects. He was one of the first to use a color TV screen and keyboard with a computer.
He designed and built the first electron beam welder. When Bettelle Memorial Institute opened its Pacific Northwest Laboratory in Richland, Washington, James joined as a Senior Scientist. There he introduced his thinking about optical data storage, constructing prototypes of a digital-to-optical recording and playback system and dispersing information about the potential of this technology. He found more interest in this work outside of the company though, so he joined a firm and developed his ideas as vice president for research and member of the board. Here he designed the system architecture for an audio player and directed the development of the hardware and the storage media. During this time, James listened to a lot of music and was always frustrated by the wear and tear of his phonograph records.
He was also unsatisfied with their sound quality. So, one Saturday while he was home alone, he started sketching out a better music recording system. James wanted a system that would record and replay songs without physical contact between its parts, and he saw the best way to do it would be by using light. He was familiar with digital data recording, in punch card or magnetic tape form. He knew that if you could represent the binary 0 and 1 with dark and light a device could read sounds or any other information without wearing it out and if he could make the binary compact enough he could store a bunch on a small piece of film. Bettelle let him pursue his project and in 1970, after years of work, he succeeded in inventing the first digital-to-optical recording and playback system, the CD. A CD is a simple round piece of plastic about 4/100ths of an inch thick, and 12 centimeters in diameter used for electronic recording, storing, and playback. Most of a CD consists of an injection-molded piece of clear polycarbonate plastic.
The Term Paper on The Canadian Recording Industry: CD Vs. Digital
City and Colour, Our Lady Peace, Arcade Fire and Billy Talent are all bands that depend on the Canadian recordi//g industry. Without this industry these bands would have had a hard time becoming known to such a wide array of people. Not only does the recording industry help make the actual recordings in the studio, but they also make it possible for artists and bands to put out songs on CDs. These ...
During manufacturing, this plastic is impressed with microscopic bumps arranged as a single, continuous, extremely long spiral track of data circling from the inside of the disc to the outside. Once the clear piece of polycarbonate is formed, a thin, reflective aluminum layer is put onto the disc, covering the bumps. Then a thin acrylic layer is sprayed over the aluminum to protect it, and the CD label is printed onto the acrylic. The compact disc was first used for audio storage only, but are now used to store audio, video, text, and any other information in digital form, and are able to hold 783 megabytes in all. How does it work you ask? Binary information is encoded in light and dark forms on the disk. Laser light is shone on the disk and the reflection from either the light or dark part of the CD produces an electric signal. Once this information is converted into electric signals its easy to convert to audio or visual signals.
The CD player finds and reads the data stored as bumps on the CD. The drive consists of three fundamental components: A drive motor, which spins the disk and will rotate between 200 and 500 rpm depending on which track is being read. As the laser moves outward, it rotates slower so the bumps travel past the laser at a constant speed, and the data comes off at a constant rate. A laser, and a lens system that focuses in on and reads the bumps. A tracking mechanism, which moves the laser assembly so that the lasers beam can follow (and be centered on) the spiral track. The tracking system has to be able to move the laser at micron resolutions.
The Essay on Data Protection
Introduction In this report I am going to explain data protection, talk about the data protection acts, rights and principles. I’m going to talk about a data controller and a data processor and what their responsibilities are. What personal and sensitive data are. What a data receiver is and what his rights are, what is involved in direct marketing and I will mention an example of abuse or ...
It has to continually move outward from the center of the disc. The job of the CD player is to focus the laser on the track of bumps. The laser beam passes through the polycarbonate layer, reflects off the aluminum layer and hits an opto-electronic device that detects changes in light. The bumps reflect light differently than the rest of the aluminum layer, and the opto-electronic sensor detects that change. The electronics in the drive interpret the changes in reflection and reads the bits. Through the 1970s he continued to refine the CD-ROM (Compact Disc Read-Only Memory), which is an adaptation of the CD that is designed to store computer data in the form of text and graphics, as well as hi-fi stereo sound.
It can be read (but not written) by a computer using a CD-ROM drive. At first, potential investors and even scientists were skeptical about long-term applications and profits. It wasn’t until 1980 that Russell’s company, Battelle, first licensed his system; and it was 1985 before major electronics corporations like Philips and Sony bought manufacturing rights and began mass production. Thanks to the CD, we are able to bring a variety of music with us on the go, without taking up a lot of space. Without CDs, we wouldnt have computer games, or software. We spend less money now, because not only does the CD have an almost faultless quality, they can survive finger marks, small scratches, and water, and theres no contact between the disc and the whats reading it, so the CD lasts longer. From the CD, came the CD-ROM, CD-I (an interactive CD thats used to store video, audio or data), CD-ROM XA (a CD that contains computer data, compressed audio data, and video/picture data) photo and video CDs, CD-R (a writeable CD that can only be written to once), and the CD-RW (a re-writeable CD that can be written many times).
The Term Paper on Mail Merge Data Computer System
AO 1 a Choosing and describing applications The hardware and software available to me and that I have used in this application are: - Operating System Windows 2000 Professional Hardware Software Processor- Celeron- 1. 1 GHz Word Processor- Microsoft Word 2000 Hard Disk- 20 Gb Spreadsheet- Microsoft Excel 2000 Ram- 128 MB Database- Microsoft Access 2000 CD Rom- 52 x Graphics Editing- Microsoft ...
We can now store our own music, documents, and other files onto a disk, which is seen in both good and bad ways, but either way, the CD has brought a lot more convenience to our present world.
RESOURCES http://inventors.about.com http://web.mit.edu/invent/www/inventorsR-Z/russell .html http://www.spie.org/web/oer/november/nov00/spiesce ne.html http://www.wsd1.org/litonline/invention.htm http://home.earthlink.net/~sturmer/tomorrow.htm http://www.lawley.wa.edu.au/science/sound/cd page.htm http://www.iei.ie/steps/house/CD.html http://www.promopatent.net/storie/cd rom.html http://www.quido.cz/objevy/kompakt.a.htm http://www.howstuffworks.com.
