ABC Chemicals NT recognises that to ensure a safe workplace, risks must be identified, assessed and eliminated or controlled. To achieve this there are a number of measures which will be implemented to manage all identified health and safety risks.
These include:- Setting up a well documented system for identifying, reporting and responding to actual and potential hazards Implementing a risk management program that involves regular workplace inspections, safety audits, job safety analyses and development of safe work procedures Consulting with workers and their representatives, managers and outside experts, to identity potential hazards, classify the risk and implement necessary control measures to eliminate or minimise the risk Train all workers and managers on how to apply the risk management process Risk Management is a process whereby hazards are identified in the workplace, the risks associated with of those hazards are assessed, and then control measures are implemented which will eliminate or minimise the risk of injury from the hazards which have been identified.
The Risk Management steps are: What is the problem in the workplace which may cause injury or ill health? How serious is the problem? What needs to be done to solve the problem? Put these controls in place. Are the controls effective in eliminating or reducing the risk? Are changes necessary? Steps in the Risk Management Procedure Step 1: Hazard Identification Hazards will be identified by the following methods:- Workplace inspections, safety audits of the work premises Job Safety Analysis Consultation Incident Reporting and Investigation Use of Codes, Standards, Acts And Regulations Hazards identified through analysis of a job or work activity will be documented using a Job Safety Analysis form [Refer to Step 5 below] Hazards identified through incidents or general observation will be documented on the Incident Report Form, Hazard Report Form or Workplace Inspection Checklist Hazards identified and controlled through other methods will be documented on the Risk Management Register form Step 2: Risk Assessment Each hazard/hazardous situation will be assigned a risk rating which is used for prioritising hazards and quantifying the degree of risk. The risk rating is determined by using the risk assessment matrix below. 1. Consequences [What could be the outcome/the severity? ] 2. Likelihood [What is the likelihood of the consequence? ] Very Likely Likely Unlikely Very Unlikely
... for risk assessment and control, source: Germanischer Lloyd 2010) 8. Creating a good evaluation and control system of safety management Finally, the implementation of a safety management control ... be recognised. Plans have to be devised in order to identify hazards on different ships. In order to avoid accidents, it is ...
Kill or cause permanent disability or ill health 1 1 2 3 Long-term illness or serious injury 1 2 3 4 Medical attention and several days off work 2 3 4 5 First aid needed 3 4 5 6 Risk assessments will be reviewed when: An incident occurs There are significant changes to workplace activities, services and products There is evidence that the risk assessment is no longer valid Risk Control Where possible, elimination of the hazards is to be considered. Where elimination is not reasonably practicable, the risk will be controlled in accordance with the hierarchy of hazard controls (refer to below table) Most effective control measure Least effective control measure Method
Examples of hazard controls Eliminate Remove the hazard from the workplace or process so it is not used. Substitution Use a Less hazardous substance, material or system of work Isolation Enclose noisy or dangerous equipment Engineering Controls Mechanical handling devices, machine guarding Administrative Controls Training, safe work practices, safety signs Personal Protective Equipment Safety glasses, ear plugs, safety boots A combination of the above methods may be needed to reduce the risk to the lowest level. Step 4: Evaluation and Review Following implementation of control measures, there will be periodic reviews to ensure they are appropriate and effective.
ACKNOWLEGEMENTS Our team would like to express our gratitude towards Dragon Link Granite Pte Ltd for their acceptance to be our host company and their active involvement in this project. We would like to especially thank Mr. Pek Tiong Hin, Managing Director of Dragon Link Granite Pte Ltd for his valuable input to our project and kind hospitality towards our team throughout the whole engagement ...
This will be achieved through regular workplace inspections, consultation with workers and review of incident investigations. Step 5: Documenting Safe Work Practices – Job Safety Analysis and Safe Work Procedures As part of the risk assessment process ABC Chemicals NT will conduct job safety analyses on jobs that pose a significant risk to the health and safety of employees. A Job Safety Analysis (JSA) breaks down a job or work tasks into steps and identifies the hazards associated with each step. It also assesses the risks associated with that task and specifies the control measures which need to be implemented to keep the risk as low as reasonably practicable.
Once the JSA has been completed, the information from the JSA (re: steps and hazards) will be transferred into a Safe Work Procedure in a clear and concise way explaining how the job is to be done and what workers need to do to ensure the job is done safely. Documenting safe work practices will include the following:- Consultation with employees/ workers performing the jobs Conduct a JSA using the appropriate document. Identify the hazards associated with each step and the associated risks. A JSA will also allow the identification of appropriate control measures to minimise the risk of harm. Document the Safe Work Procedure using the appropriate document. Include the control measures identified from the JSA in the procedure.
Distributing Safe Work Procedures for review before implementation Implement Safe Work Procedures through communication channels and training Review Safe Work Procedures when there is a change in workplace activities, services, products or following an incident Variations ABC Chemicals NT reserves the right to vary, replace or terminate this procedure from time to time. WORKPLACE PARTICIPANT ACKNOWLEDGEMENT I acknowledge: receiving the ABC Chemicals NT Procedure; that I should comply with the Procedure; and that there may be disciplinary consequences if I fail to comply, which may result in the termination of my employment. Your name: Signed: Date:
Australia logo, this copyright work is licensed under a Creative Commons Attribution-Noncommercial 3. 0 Australia licence. To view a copy of this licence, visit http://creativecommons. org/licenses/by-nc/3. 0/au/ In essence, you are free to copy, communicate and adapt the work for non commercial purposes, as long as you attribute the work to Safe Work Australia and abide by the other licence ...